• Open Menu -> Settings -> Connection settings
• Press Options and then select Add new connection
• Fill your parameters as shown below:
• Profile Name: victoria mobile
• Home URL: www.victoriamobile.cz
• If Proxy point unchecked then check it.
• Fill your parameters as shown below:
  • IP address:
  • Port:
  • Bearer: GPRS
• If DNS point checked then uncheck it.
• Select Advanced settings.
• Fill your parameters as show below:
  • APN: data.victoriamobile.cz
  • Login ID: lmde
  • Password: plus
• Press Save two times.
• Return to Menu and select Browser -> Browser settings.
• Highlight victoria mobile and press Options then select Activate.

• Select Access Points > Options > New access point > Use default settings

• Tap Menu
• Highlight Messages and tap
• Highlight Settings and tap
• Highlight Multimedia messages and tap
• Tap Options, highlight Create and tap
• Highlight Set name, enter victoria mobile and tap OK.
• Highlight Access name and tap, enter data.victoriamobile.cz and tap OK
• Highlight Auth type and tap, tap again to choose Normal
• Highlight User ID and enter lmde and tap OK
• Highlight Password and enter plus and tap OK
• Highlight Protocol and tap, tap again to choose HTTP.
• Highlight Home URL and tap, enter www.victoriamobile.cz and tap OK
• Highlight Proxy and tap, enter Proxy IP and tap OK
• Highlight Port and tap, enter Port Number and tap OK
• Highlight Linger time (sec.) and tap, enter 120 and tap OK
• Highlight Advanced settings and tap
• Ignore Static IP this should be left unticked
• Ignore Static DNS this should be left unticked
• Ignore Traffic class as this is preset Subscribed
• Tap Back
• Tap Save
• Your new profile should now be ticked, if not tap to tick
• Highlight victoria mobile and tap Options, highlight Save and tap.

• Tap the Menu icon in the centre of the navi box
• Highlight Settings and tap OK
• Highlight Application settings and tap OK
• Highlight Browser settings and tap OK
• Press Options, highlight Create and tap OK
• Highlight Set name and enter victoria mobile
• Highlight Access name and enter data.victoriamobile.cz
• Ignore Auth type as this is preset at Normal
• Highlight User ID and enter lmde
• Highlight Password and enter plus
• Ignore Protocol as this is preset at HTTP
• Highlight Home URL and enter www.victoriamobile.cz
• Highlight Proxy address and enter Proxy IP
• Highlight Port and enter Port No
• Highlight Linger time (sec.) and enter 120
• Ignore Advanced settings as these are all preset blank
• Press Save
• Highlight victoria mobile and press Options, highlight Select and press Select
• Press Back, and then press Yes to the question Save?
• Tap Back 3 times to return to the standby screen

• Tap the Menu icon
• Tap Settings
• Tap Application settings
• Tap Browser
• Tap Create
• Tap Set name enter victoria mobile and then tap Done
• Tap Access name enter data.victoriamobile.cz and then tap Done
• Ignore Auth type as this is preset at Normal
• Tap User ID enter lmde and then tap Done
• Tap Password enter plus and then tap Done
• Ignore Protocol as this is preset at HTTP
• Tap Home URL enter www.victoriamobile.cz and then tap Done
• Tap Proxy address enter Proxy IP and then tap Done
• Tap Linger time (sec.) enter 120 and then tap Done
• Ignore Advanced settings as these are all preset blank
• Tap Save
• Tap victoria mobile to make it active

• Press Menu (Navi key)
• Highlight Settings and Select (left soft key)
• Highlight Application and Select (left soft key)
• Highlight Browser and Select (left soft key)
• Highlight Profile settings and Select (left soft key)
• Highlight a spare profile and press Options (left soft key)
• Highlight Edit and Select (left soft key)
• Highlight Profile name and enter victoria mobile
• Highligh Home URL and enter www.victoriamobile.cz
• Highlight Bearer and select GPRS only by pressing the Navi key to the right
• Highlight Proxy and select disable by pressing the Navi key to the right
• Highlight GPRS settings and select by pressing the Navi key
• Highlight APN and enter data.victoriamobile.cz
• Highlight Login ID and enter lmde
• Highlight Password and enter plus
• Press Save (left soft key) twice
• If other settings are present, highlight victoria mobile and press the Navi key to make it active.
• Press Back five times to return to the standby screen.

• press menu (navy key)
• highlight the setting and select(left soft key)
• highlight application settings and select(left soft key)
• highlight browser and select (left soft key)
• highlight browser profiles and select(left soft key)
• press options (left soft key)
• highlight add new connection and select(left soft key)
• profile name and enter gifgaff
• highlight home url and enter http://www.victoriamobile.cz
• check that proxy box is ticked
• enter i.p address
• highlight port enter 8080
• highlight linger time(sec) and enter 120
• dnx box un ticked
• highlight bearer and select gprs only by pressing the navi key
• highlight advanced sett and press the navi key to select
• highlight apn : data.victoriamobile.cz and enter
• enter username: lmde
• Password: plus
• press back

• Open Menu -> Fun Box -> WAP Browser -> Settings.
• Scroll to the desired profile and then press Select.
• Fill your parameters as shown below:
• Profile name: victoria mobile
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Username: lmde
• Password: plus
• Apn: data.victoriamobile.cz
• To start WAP session return to WAP Browser and select Home.
• To finish WAP session press NO.

• Open Menu -> Browser -> Profile settings
• Scroll to the desired profile and then press Select
• Fill your parameters as shown below.
• Profile name: victoria mobile
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Proxy: disable
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Press Save two times.
• Return to Browser and then select Current Proxy.
• Highlight victoria mobile and press Select.
• To start WAP session select Home.
• To finish WAP session press NO.

• Open Menu -> Fun Box -> WAP Browser -> Settings.
• Scroll to the desired profile and then press Select.
• Fill your parameters as shown below.
• Profile name: victoria mobile
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Proxy: disable
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• To start WAP session return to WAP Browser and select Home.
• To finish WAP session press NO.

• Press the Menu button (left soft key).
• Scroll to 'Browser' and press select (left soft key).
• Highlight 'Profile settings' and press select (left soft key).
• Highlight the next available Profile (e.g. Profile 1), then press select (left soft key).
• Highlight 'Profile name'. Enter: victoria mobile
• Highlight 'Home URL'. Enter: www.victoriamobile.cz
• Highlight 'Bearer'. Select 'GPRS only' pressing right directional Navi key.
• Highlight 'GPRS settings' then press the Navi key to select
• Highlight 'APN'. Enter: data.victoriamobile.cz
• Highlight 'Login ID'. Enter: lmde
• Highlight 'Password'. Enter: plus
• Press Save (left soft key).
• Then press Save again (left soft key).
• Press Back (right soft key).
• Highlight the profile which has been created and press select (left soft key).
• Press Back (right soft key) 2 times to return to the standby screen.

• Tap Menu.
• Tap Settings
• Tap Application settings
• Tap Internet
• Tap Create
• Tap the Set name box and enter victoria mobile then tap Done
• Tap the Access name box and enter data.victoriamobile.cz then tap Done
• Tap the Auth type drop down button and tap Normal
• Tap the User ID box and enter lmde then tap Done
• Tap the Password box and enter password: plus then tap Done
• Tap the Protocol drop down button and tap HTTP
• Tap the Home URL box and enter www.victoriamobile.cz then tap Done
• Tap the Linger time (sec) box and enter 120 then tap Done
• Tap Save
• Press the Back button three times to return to the standby screen.

• Press the Menu button (left soft key).
• Scroll to 'Browser' and press select (left soft key).
• Highlight 'Profile settings' and press select (left soft key).
• Highlight the next available Profile (e.g. Profile 1), then press select (left soft key).
• Highlight 'Profile name'. Enter: victoria mobile
• Highlight 'Home URL'. Enter: www.victoriamobile.cz
• Highlight 'Bearer'. Select 'GPRS only' pressing right directional Navi key.
• Highlight 'GPRS settings' then press the Navi key to select.
• Highlight 'APN': data.victoriamobile.cz
• Highlight 'Login ID'. Enter: lmde
• Highlight 'Password'. Enter: plus
• Press Save (left soft key).
• Then press Save again (left soft key).
• Press Back (right soft key).
• Highlight 'Current profile' and press select (left soft key).
• Highlight the profile which has been created and press select (left soft key).
• Press Back (right soft key) 2 times to return to the standby screen

• Tap Applications
• Tap Settings (located on the second page)
• Tap Wireless and network
• Tap Mobile networks
• Tap Access Point Names
• Press the Menu key
• Tap New APN: data.victoriamobile.cz
• Tap Name then tap the text box and enter victoria mobile then tap OK
• Tap APN then tap the text box and enter data.victoriamobile.cz
• Tap Username then tap the text box and enter lmde then tap OK
• Tap Password then tap the text box and enter password: plus then tap OK
• Highlight APN type and tap
• Tap APN type then tap internet (so a green dot appears next to it)
• Press the Back key five times to return to the standby screen

• Press Menu (left soft key)
• Highlight the Settings and Select (left soft key)
• Highlight Application and Select (left soft key)
• Highlight Internet and Select (left soft key)
• Highlight Profiles settings and Select (left soft key)
• Highlight a Profile and press Options
• Highlight Edit and Select (press Navi key)
• Highlight Set name and enter victoria mobile
• Highlight Home URL and enter www.victoriamobile.cz
• Highlight Bearer and select GPRS only by pressing the Navi key to the right
• Skip past DNS1 and DNS2 as these are preset blank.
• Highlight GPRS settings and select (press Navi key)
• Highlight Access name and enter : data.victoriamobile.cz
• Highlight User ID and enter lmde
• Highlight Password and enter password: plus
• Press Save twice (left soft key)
• Press Back five times to return to the standby screen.

• Press the Menu button (left soft key).
• Highlight 'Browser' and press 'OK' (Navi key).
• Highlight 'Profile settings' and press 'OK' (Navi key).
• Highlight a clear profile and 'Select' (Navi key).
• Highlight 'Profile name' and enter victoria mobile
• When you have typed the information in, do not press 'OK' (Navi key) unless otherwise told to, as this will save the profile and send you back to the profile select screen. If at any stage you to this by mistake, then just select the profile again.
• Highlight 'Home URL' and change to www.victoriamobile.cz
• Highlight 'Bearer' and select 'GPRS only' by pressing the Navi key right.
• Highlight 'GPRS settings' and press 'OK' (Navi key).
• (dots will automatically be added).
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'Login ID' and enter lmde
• Highlight 'Password' and enter plus
• Press 'Save' (left soft key).
• Press 'Save' again (left soft key).
• Press Back (right soft key).
• Highlight 'Current profile' and press 'OK' (Navi key).
• Highlight victoria mobile and press 'Select' (left soft key).
• Press 'Back' (right soft key) 2 times to return to the standby screen.

• Tap Menu
• Tap Settings
• Tap Application settings
• Tap Internet
• Tap Internet profiles
• Tap Create
• Tap the Set name box and enter victoria mobile
• Skip past Bearer type as this is preset as Packet data
• Tap the Access name box and enter data.victoriamobile.cz then tap Done
• Skip past Auth type as this is preset as Normal
• Tap the User ID box and enter lmde then tap Done
• Tap the Password box and enter password: plus
• Skip past Protocol as this is preset as HTTP
• Tap the Home URL box and enter www.victoriamobile.cz then tap Done
• Tap Save

• Press the Menu key
• Tap Settings
• Tap Applications
• Tap Internet
• Tap Internet profiles
• Tap Create
• Tap the Set name box and enter victoria mobile
• Skip past Bearer type as this is preset as Packet data
• Tap the Access name box and enter data.victoriamobile.cz then tap Done
• Skip past Auth type as this is preset as Normal
• Tap the User ID box and enter lmde then tap Done
• Tap the Password box and enter password: plus then tap Done
• Skip past Protocol as this is preset as HTTP
• Tap the Home URL box and enter www.victoriamobile.cz then tap Done
• Tap the Linger time (sec) box and enter 300 then tap Done
• Tap Save

• Press the Menu button (Navi key).
• Highlight 'Browser' and 'Select' (left soft key).
• Highlight 'Browser settings' and 'Select' (left soft key).
• Highlight 'Browser profiles' and 'Select' (left soft key).
• Highlight a clear profile and press 'Options' (left soft key).
• Highlight 'Edit' and 'Select' (left soft key).
• Highlight 'Profile name' and enter victoria mobile.
• When you have typed the information in, do not press 'OK' (Navi key) unless otherwise told to, as this will save the profile and send you back to the profile select screen. If at any stage you to this by mistake, then just select the profile again.
• 6. Highlight 'Home URL' and change to www.victoriamobile.cz
• Highlight 'Bearer' and select 'GPRS only' by pressing the Navi key right.
• Highlight 'Proxy' and select 'disable' by pressing the Navi key right.
• Highlight 'GPRS settings' and press the Navi key.
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'Login ID' and enter 'lmde'.
• Highlight 'Password' and enter 'plus'.
• Press 'Save' (left soft key).
• Press 'Save' again (left soft key).
• Press Back (right soft key).
• Highlight victoria mobile and press the Navi key to select.
• Press 'Back' (right soft key) 2 times to return to the standby screen.

• From Menu, choose Settings > Network Settings > Connections
• Press the left Soft Key and Create a New Connection by choosing NEW in the option.
• Enter the following parameters in the field requirements
• SET NAME: victoria mobile
• ACCESS NAME: data.victoriamobile.cz
• AUTH TYPE: Normal
• USER ID: lmde
• Password: plus
• Protocol: HTTP
• Home URL: www.victoriamobile.cz
• proxy: disable
• Proxy Address:
• Linger Time( 300 Sec)
• ADVANCE SETTINGS
• STATIC IP (Unchecked)
• STATIC DNS (Unchecked)
• Traffic Class: Interactive
• Click OK and click Save
• Click Back and Go to Browser Settings.
• Choose victoria mobile CONNECT as default in Browser Settings

• homepage : www.victoriamobile.cz
• Session mode :Permanent
• Connection Security: Off
• Data Bearer: packed data
• GPRS Access point : data.victoriamobile.cz
• IP address:
• proxy: no
• Authentication type: Normal
• Login type: victoria mobile
• User name: lmde
• Password: plus

• Press Menu (long press the Navi key)
• Highlight the Settings and Select (left soft key)
• Highlight Application settings and Select (left soft key)
• Highlight Internet and Select (left soft key)
• Highlight Internet profiles and Select (left soft key)
• Press Create (left soft key), if Create is not showing press Options, highlight Create and select (press Navi key)
• Highlight Set name and enter victoria mobile
• Highligh Home URL and enter www.victoriamobile.cz
• Highlight Bearer and select GPRS only by pressing the Navi key to the right
• Skip past DNS1 and DNS2 as these are preset blank.
• Highlight GPRS settings and select (press Navi key)
• Highlight Access name and enter data.victoriamobile.cz
• Highlight User ID and enter lmde
• Highlight Password and enter password: plus
• Press Save twice (left soft key)
• If other settings are present, highlight victoria mobile and activate
• Press Back (right soft key) five times to return to the standby screen.

• Press 'Menu' (Navi key).
• Highlight 'Settings' and 'Select' (left soft key).
• Highlight 'Application settings' (left soft key).
• Highlight 'Browser' and 'Select' (left soft key).
• Highlight 'Browser profiles' and 'Select' (left soft key).
• Highlight a clear profile and press 'Options' (left soft key).
• Highlight 'Edit' and 'Select' (left soft key).
• Highlight 'Profile name' and enter victoria mobile
• Highlight 'Home URL' and enter www.victoriamobile.cz
• Highlight 'Bearer' and select 'GPRS only' (press Navi key to the right to select).
• Highlight 'Proxy' and select 'disable' (press Navi key to the right to select).
• Highlight 'GPRS settings' and select (press the Navi key).
• Highlight 'Proxy IP' .
• Highlight 'Proxy Port'
• Highlight 'APN' and enter : data.victoriamobile.cz
• Highlight 'Login ID' and enter lmde
• Highlight 'Password' and enter plus
• Press 'Save' twice (left soft key).
• Tap 'Back' (right soft key) 3 times to return to the standby screen.

• Press the 'i' button (Navi key).
• Highlight 'Settings" and 'Select' (left soft key).
• Highlight 'Connection settings' and 'Select' (left soft key).
• Press 'Options' (left soft key).
• Highlight 'Add new connection' and press the Navi key to the right. Highlight 'WAP settings' and 'Select' (left soft key).
• Highlight 'Profile Name' and enter victoria mobile
• Highlight 'Homepage URL' and enter www.victoriamobile.cz
• Highlight 'Bearer' and select 'GPRS' by pressing the Navi key left or right.
• Highlight 'Advanced settings' and select (press Navi key).
• Highlight 'APN' and enter: data.victoriamobile.cz
• Highlight 'Login ID' and enter lmde
• Highlight 'Password' and enter plus
• Press 'Save' twice (left soft key).
• Press 'Back' twice to get back to main menu (right soft key).
• Highlight 'Browser' and 'Select' (left soft key).
• Highlight 'Browser settings' and 'Select' (left soft key).
• Highlight victoria mobile and press 'Options' (left soft key).
• Highlight 'Activate' and 'Select' (left soft key).
• Press 'Back' (right soft key) 2 times to return to the main screen.

• Account Name: victoria mobile
• Homepage: http: www.victoriamobile.cz
• Username: lmde
• Password: plus
• Proxy: disabled/yes
• Proxy and Server Address: no
• Access point Name: data.victoriamobile.cz
• Proxy and Server Port:
• Data bearer: GPRS/ Packet Data
• Authentication Type: Normal

• Account Name – victoria mobile
• Username – lmde
• Password – plus
• Proxy – disabled/yes
• Homepage – www.victoriamobile.cz
• Proxy and Server address – None
• Proxy and Server Port – None
• Access Point Name – data.victoriamobile.cz
• Data bearer – GPRS/ Packet data
• Authentication Type – Normal.

• Account Name – victoria mobile
• Homepage – www.victoriamobile.cz
• Username – lmde
• Password – plus
• Proxy – disabled/yes
• Proxy and Server Adress – None
• Accespoint Name – data.victoriamobile.cz
• Proxy and Server Port – None
• Data bearer – GPRS/ Packet Data
• Authentication Type – Normal

Step 1:Setup your network mode.
• Go to Menu->Settings->Connectivity (or wherever you may edit network settings) and select dual mode.

• a) Go to menu > Browser > Proxy settings
• b) Choose your profile
• Once you´ve selected the profile, complete the following fields:
• Profile name: victoria mobile
• Homepage URL: www.victoriamobile.cz
• Bearer: GPRS
• Proxy use: disabled
• GPRS setting:
• IP address:
• IP Port: None
• APN: data.victoriamobile.cz
• Login ID: lmde
• Password: plus

• You'll need to complete all steps for this to work.
• When entering the following information do not press Save until told to in the instructions.
• Tap Menu.
• Tap Settings
• Tap Application settings
• Tap Browser profiles
• Tap Create
• Tap the Set name box and enter victoria mobile then tap Done
• Tap the Access name box and enter: data.victoriamobile.cz then tap Done
• Tap the Auth type drop down button and tap Normal
• Tap the User ID: lmde
• Tap the Password: plus
• Tap the Protocol drop down button and tap HTTP
• Tap the Home URL box and enter www.victoriamobile.cz then tap Done
• Press the Back button three times to return to the standby screen.
• Switch your handset off and then back on to complete your settings.
• The GPRS WAP settings are now complete.

• Account Name: victoria mobile
• Username: lmde
• Password: plus
• Proxy: disabled/yes
• Homepage: www.victoriamobile.cz
• Proxy and Server address:
• Proxy and Server Port:
• Access Point Name:data.victoriamobile.cz
• Data Bearer: GPRS/ Packet data
• Authentication Type: Normal

• Homepage – www.victoriamobile.cz
• User Name – lmde
• Password – plus
• Proxy – disabled/yes.
• Proxy and Server Adress –
• Proxy and Server Port –
• Data bearer – GPRS or Packet Data.
• Access Point Name – data.victoriamobile.cz
• Authentication Type – Normal
• Use preferred access point – No

• Samsung J700 GPRS and WAP / Internet settings
• You'll need to complete all steps for this to work.
• The phone has a 4-way directional 'Navi' key which includes a centre select/menu button. 2 soft keys are either side of this.
• To insert the required symbol (e.g. : / . @) into your settings, simply press the number '1' key until the symbol appears.
• Press the Menu button (Navi key).
• Highlight 'Browser' and 'Select' (left soft key).
• Highlight 'Profile settings' and 'Select' (left soft key).
• Highlight a clear profile and press 'Select' (left soft key).
• Highlight 'Profile name' and victoria mobile.
• When you have typed the information in, do not press 'OK' (Navi key) unless otherwise told to, as this will save the profile and send you back to the profile select screen. If at any stage you to this by mistake, then just select the profile again.
• Highlight 'Home URL' and change to www.victoriamobile.cz
• Highlight 'Bearer' and select 'GPRS only' by pressing the Navi key right.
• Highlight 'Proxy' and select 'disable' by pressing the Navi key right.
• Highlight 'GPRS settings' and press the Navi key.
• Highlight 'APN: data.victoriamobile.cz
• Highlight 'Login ID: lmde
• Highlight 'Password' and enter 'password: plus
• Press 'Save' (left soft key).
• Press 'Save' again (left soft key).
• Press Back (right soft key).
• Highlight 'Current profile' and 'Select' (left soft key).
• Highlight victoria mobile and press the Navi key to select.
• Press 'Back' (right soft key) 2 times to return to the standby screen.

• Press 'Menu' (left softkey).
• Highlight 'Settings' and 'Select' (left softkey).
• Highlight 'Application settings' and 'Select' (left softkey).
• Highlight 'Browser settings' and 'Select' (left softkey).
• Press 'Options' (left softkey), highlight 'Create' and 'Select' (left softkey).
• Highlight 'Set name' and enter victoria mobile
• Highlight 'Access name' and enter data.victoriamobile.cz
• Ignore 'Auth type' as this is preset at 'Normal'.
• Highlight 'User ID' and enter : lmde
• Highlight 'Password' and enter : plus
• Ignore 'Protocol' as this is preset at 'HTTP'.
• Highlight 'Home URL' and enter: www.victoriamobile.cz
• Highlight 'Proxy : disable
• Highlight 'Port'
• Highlight 'Linger time (sec.) and enter
• Ignore 'Advanced settings' as these are all preset blank.
• Press 'Save' (left softkey).
• Highlight victoria mobile and press 'Options' (left softkey), highlight 'Save' and press 'Select' (left softkey).
• Tap 'Back' (right softkey) 3 times to return to the standby screen.

• Account Name: victoria mobile
• User Name: lmde
• Password: plus
• Proxy: disabled/yes
• Access Point Name: data.victoriamobile.cz
• Homepage:www.victoriamobile.cz
• Authentication Type: Normal

• Tap Menu (right softkey).
• Tap the 'Browser' icon.
• Tap 'Settings'.
• Tap 'Browser profiles'.
• Tap 'Options' (left softkey), highlight 'Create' and tap.
• Highlight 'Set name' and tap, enter victoria mobile and tap 'OK'.
• Highlight 'Access name' and tap, enter data.victoriamobile.cz and tap 'OK'.
• Highlight 'Auth type' and tap, tap again to choose 'Normal'.
• Highlight 'User ID: lmde and tap 'OK'.
• Highlight 'Password: plus and tap 'OK'.
• Highlight 'Protocol' and tap, tap again to choose 'HTTP'.
• Highlight 'Home URL' and tap, enter : www.victoriamobile.cz and tap 'OK'.
• Highlight 'Proxy: disable
• Highlight 'Port' and tap, enter
• Highlight 'Linger time (sec.) and tap,
• Highlight 'Advanced settings' and tap.
• Ignore 'Static IP' this should be left un ticked.
• Ignore 'Static DNS' this should be left un ticked.
• Ignore 'Traffic class' as this is preset 'Subscribed'.
• Tap 'Back' (right soft key).
• Tap 'Save' (left soft key).
• Your new profile should now be ticked, if not tap to tick.
• Highlight victoria mobile and tap 'Options', highlight 'Save' and tap.
• Tap 'Back' (right soft key) 2 times to return to the main menu.

• Please note all steps must be completed to ensure the settings are correctly configured.
• Press Menu (Navi key).
• Highlight the Settings and Select (left soft key).
• Highlight Application settings and Select (left soft key).
• Highlight Browser and Select (left soft key).
• Highlight Profile settings and Select (left soft key).
• Press Create (left soft key).
• Highlight Set name and enter victoria mobile
• High light Home URL and enter www.victoriamobile.cz
• Highlight Bearer and select GPRS only by pressing the Navi key to the right.
• Highlight Proxy and select Off or disable by pressing the Navi key to the right
• Skip past DNS1 and DNS2 as these are preset blank.
• Highlight GPRS settings and select (press Navi key).
• Highlight Access name and enter data.victoriamobile.cz.
• Highlight User ID and enter : lmde
• Highlight Password and enter : plus
• Press Save twice (left soft key).
• If other settings are present, highlight victoria mobile and press the Navi key to make it active.
• Press Back five times to return to the standby screen.
• What to do next
  
  Switch your handset off and then back on to complete your settings.
  
  The settings are now complete.
  
  However, if you are still experiencing any issues using this service.

• Settings - GPRS WAP
  
  Please note all steps must be completed to ensure the settings are correctly configured.
• Press Menu (Navi key).
• Highlight the Settings and Select (left soft key).
• Highlight Application settings and Select (left soft key).
• Highlight Browser and Select (left soft key).
• Highlight Profile settings and Select (left soft key).
• Press Create (left soft key).
• Highlight Set name and enter victoria mobile
• High light Home URL and enter www.victoriamobile.cz
• Highlight Bearer and select GPRS only by pressing the Navi key to the right.
• Highlight Proxy and select Off or disable by pressing the Navi key to the right
• Skip past DNS1 and DNS2 as these are preset blank.
• Highlight GPRS settings and select (press Navi key).
• Highlight Access name and enter data.victoriamobile.cz.
• Highlight User ID and enter : lmde
• Highlight Password and enter : plus
• Press Save twice (left soft key).
• If other settings are present, highlight victoria mobile and press the Navi key to make it active.
• Press Back five times to return to the standby screen.
• What to do next
  
  Switch your handset off and then back on to complete your settings.
  
  The settings are now complete.
  
  However, if you are still experiencing any issues using this service, please contact Customer Services.

• Press the Menu button (left soft key)
• Highlight 'Browser' and press 'Select' (left soft key)
• Highlight the next available profile e.g. Profile 2 and press 'Select' (left soft key)
• Highlight 'Profile Name' and Enter: victoria mobile
• Highlight 'Homepage URL' and Enter: www.victoriamobile.cz
• Highlight 'Bearer' and Select 'GPRS only' using left or right Navi key
• Highlight 'Proxy: disable
• Highlight 'GPRS settings' and press the middle Navi key
• Highlight 'IP Address' and Enter:
• Highlight 'Proxy port' and Enter:
• Highlight 'APN' and Enter: data.victoriamobile.cz
• Highlight 'Login ID: lmde
• Highlight 'Password': plus
• Press Save (left soft key)
• Press Save (left soft key)
• Press Back (right soft key)
• Highlight 'Current profile' and press Select (left soft key)
• Scroll to victoria mobile and press Select (left soft key)
• Press 'Back' (right soft key) 2 times to return to the main screen
• Press 'Back' (right soft key) 2 times to return to the main screen

• Press Start (left soft key)
• Highlight Settings and select (press Navi key)
• Highlight More and select (press Navi key)
• Highlight Connections and select (press Navi key)
• Highlight GPRS and select (press Navi key)
• Highlight New... and select (press Navi key)
• Highlight Description and enter victoria mobile
• Highlight Connects to: and select The Internet by pressing the Navi key to the right
• Highlight Access point and enter data.victoriamobile.cz
• Highlight Username and enter lmde
• Highlight Password and enter plus
• Highlight Authentication Type and select PAP by pressing the Navi key to the right
• Skip past Primary DNS, Seconary DNS and IP address as these are preset blank
• Press Done (left soft key) four times
• Presss the Home key to return to the standby screen.

• Press the Menu button (left soft key)
• Highlight 'Settings" and Select (left soft key)
• Scroll to 'Connection settings' and Select (left soft key)
• Press Options (left soft key)
• Highlight 'Add new connection' and Select (left soft key)
• Highlight 'Profile Name' and Enter: victoria mobile
• Highlight 'Homepage URL' and Enter: www.victoriamobile.cz
• Highlight 'Proxy' and tick box using center Navi key: disable
• Highlight 'IP Address and Enter:
• Highlight 'Port' and Enter:
• Ignore 'Linger time','DNS 1 and DNS2'
• Highlight 'Bearer' and Select 'GPRS' using left or right Navi key
• Highlight 'Advanced settings' and Select using center Navi key
• Highlight 'APN' and Enter: data.victoriamobile.cz
• Highlight 'Login ID' and Enter lmde
• Highlight 'Password' and Enter plus
• Press 'Save' twice (left soft key).
• Press Back 3 times to get back to main menu (right soft key)
• Highlight 'Browser' and Select (left soft key)
• Scroll to 'Browser settings' and Select (left soft key)
• Scroll to victoria mobile and press Options (left soft key)
• Highlight 'Activate' and Select (left soft key)
• Press 'Back' (right soft key) 2 times to return to the main screen.

• Tap Menu
• Tap Settings
• Tap Applications
• Tap Internet
• Tap Internet profiles
• Tap Create
• Tap the Set name box and enter victoria mobile then tap Done
• Tap Home URL and enter www.victoriamobile.cz then tap Done
• Tap Bearer, then tap GRPS only (so a dot appears next to it) and tap Save
• Skip past Proxy as this is preset as Off
• Tap GPRS settings
• Tap the Access name and enter data.victoriamobile.cz then tap Done
• Tap the User ID box and enter lmde then tap Done
• Tap the Password box and enter plus then tap Done
• Tap Save
• Tap victoria mobile & Go to make it active (a dot should appear next to the active profile)
• Press the Back button five times to return to the standby screen

• Press the Menu button (left soft key).
• Highlight 'Browser' and press 'Select' (left soft key).
• Highlight 'Profile settings' and press 'Select' (left soft key).
• Highlight a free profile and 'Select' (left soft key).
• Highlight 'Profile Name' and enter : victoria mobile
• Highlight 'Homepage URL' and enter : www.victoriamobile.cz
• Highlight 'Bearer' and select 'GPRS only' by pressing the Navi key to right.
• Highlight 'Proxy' and select 'disable' by pressing the Navi key to right.
• Highlight 'GPRS settings' and press the Navi key.
• Highlight 'Proxy IP' and enter
• Highlight 'Proxy port' and enter
• Highlight 'APN' and enter: data.victoriamobile.cz
• Highlight 'Login ID' and enter lmde
• Highlight 'Password' and enter plus
• Press 'Save' twice (left soft key).
• Press 'Back' once (right soft key).
• Highlight 'Current profile' and 'Select' (left soft key).
• Highlight victoria mobile and 'Select' (left soft key).
• Press 'Back' twice (right soft key).

• Press the Menu button (left soft key).
• Scroll to 'Browser' and press select (left softkey).
• Highlight 'Profile settings' and press select (left softkey).
• Highlight the next available Profile (e.g. Profile 1), then press select (left softkey).
• Highlight 'Profile name'. Enter: victoria mobile
• Highlight 'Home URL'. Enter: www.victoriamobile.cz
• Highlight 'Bearer'. Select 'GPRS only' pressing right directional Navi key.
• Highlight 'Proxy'. Select 'disable' pressing right directional Navi key.
• Highlight 'GPRS settings' then press the Navi key to select.
• Highlight 'APN'. Enter: data.victoriamobile.cz
• Highlight 'Login ID'. Enter: lmde
• Highlight: plus. Enter: plus
• Press Save (left softkey).
• Then press Save again (left soft key).
• Press Back (right softkey).
• Highlight 'Current profile' and press select (left softkey).
• Highlight the profile which has been created and press select (left softkey).
• Press Back (right softkey) 2 times to return to the standby screen.

• Press 'Menu' (left softkey).
• Highlight 'Settings" and 'Select' (left softkey).
• Scroll to 'Connection Settings' and 'Select' (left softkey).
• Press 'Options' (left softkey), highlight 'Add new connection' and 'Select' (left softkey).
• Highlight 'Profile Name' and enter victoria mobile
• Highlight 'Homepage URL' and enter www.victoriamobile.cz
• Highlight 'Proxy' and tick the box (press the 'i' key)
• Ignore 'DNS'.
• Highlight 'Bearer' and select 'GPRS' (press Navi key left or right to change).
• Highlight 'Advanced settings' and select (press the 'i' key).
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'Login ID' and enter lmde
• Highlight: plus and enter: plus
• Press 'Save' twice (left softkey).
• Press 'Back' twice (right softkey).
• Highlight 'Browser' and 'Select' (left softkey).
• Scroll to 'Browser settings' and 'Select' (left softkey).
• Highlight victoria mobile and select (press the 'i' key).
• Press 'Back' (right softkey) twice to return to the standby screen.

• Press the Menu button (left soft key).
• Highlight 'Browser' and press 'Select' (left soft key).
• Highlight 'Browser settings' and press 'Select' (left soft key).
• Press 'Options' (left soft key), highlight 'Add new connection' and 'Select'.
• Highlight 'Profile Name' and enter victoria mobile
• Highlight 'Homepage URL' and enter www.victoriamobile.cz
• Highlight 'Proxy' and untick the box (press Navi key).
• Ignore 'DNS'.
• Highlight 'Bearer' and select 'GPRS' using left or right Navi key.
• Highlight 'Advanced settings' and select (press Navi key).
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'Login ID' and enter: lmde
• Highlight: plus and enter: plus
• Press 'Save' twice (left soft key).
• Highlight victoria mobile and press 'Options', highlight 'Activate' and 'Select' (left softkey).
• Press 'Back' twice (right soft key) to return to the standby screen.

• While on the standby screen press 'Menu' (Left Soft Key).
• Scroll to 'Funbox' and press 'Select' (Left Soft Key).
• Highlight 'WWW services' and press 'Select' (Left Soft Key).
• Highlight 'Proxy settings: off or disable.
• Highlight 'GPRS setting' and press 'Select' (Left Soft Key).
• Highlight 'Gateway' and press 'Select' (Left Soft key).
• Highlight 'IP address' and press
• Highlight 'IP Port' and press
• Highlight 'APN' and press 'Select' (Left Soft Key). Enter: data.victoriamobile.cz and press 'OK' (Left Soft Key).
• Highlight 'Login Id' and press 'Select' (Left Soft Key).
• Enter lmde and press 'OK' (Left soft Key).
• Highlight: plus and press 'Select' (Left Soft Key).Enter: plus and press 'OK' (Left Soft Key).
• Press 'Back (Right Soft Key).
• Highlight 'Home URL' and press 'Select' (Left Soft Key). Enter www.victoriamobile.cz and press 'OK' (Left Soft Key).
• Highlight 'Bearer' and press 'Select' (Left Soft Key). Select 'GPRS only' and press 'Select' (Left Soft Key).
• Press 'Back'(Right Soft key) 2 times.
• Press Back (Left Soft Key) three time to get back to the stand by screen.

• Press 'Menu' (Navi key).
• Highlight ‘Settings’ and 'Select' (left soft key).
• Highlight ‘Application settings’ and 'Select' (left soft key).
• Highlight 'Browser' and 'Select' (left soft key).
• press 'Options' (left soft key).
• Highlight 'Create' and 'Select' (left soft key).
  When entering the following information do not press 'Save' until told to in the instructions.
• Highlight ‘Set name’ enter victoria mobile
• Highlight 'Access name' and enter data.victoriamobile.cz
• Check 'Auth type' is set at 'Normal' press the Navi key to the right to change.
• Highlight 'User ID' and enter lmde
• Highlight: plus and enter: plus
• Check 'Protocol' is set at 'HTTP' press the Navi key to the right to change.
• Highlight ‘Home URL’ and enter www.victoriamobile.cz
• Press 'Save' (Navi key).
• Highlight victoria mobile and press the Navi key twice to make it active.

• Tap Menu
• Tap Settings
• Tap Application settings
• Tap Internet
• Tap Create
• Tap the Set name box and enter victoria mobile then tap Done
• Tap the Access name box and enter data.victoriamobile.cz then tap Done
• Skip past Auth type as this is preset as Normal
• Tap the User ID box and enter lmde then tap Done
• Tap the Password box and enter password: plus then tap Done
• Tap the Home URL box and enter www.victoriamobile.cz then tap Done
• Tap Save
• Tap victoria mobile to make it active (a dot should appear next to the active profile)
• Press the Back icon three times to return to the standby screen.

• Tap Menu
• Tap Settings
• Tap Application settings
• Tap Internet
• Tap Create
• Tap the Set name box and enter victoria mobile then tap Done
• Tap the Access name box and enter data.victoriamobile.cz then tap Done
• Skip past Auth type as this is preset as Normal
• Tap the User ID box and enter lmde then tap Done
• Tap the Password box and enter password: plus then tap Done
• Tap the Home URL box and enter www.victoriamobile.cz then tap Done
• Tap Save
• Tap victoria mobile to make it active (a dot should appear next to the active profile)
• Press the Back icon three times to return to the standby screen.

• Press 'Menu' (Navi key).
• Highlight the ‘Settings’ and 'Select' (left soft key).
• Highlight ‘Application settings’ and 'Select' (left soft key).
• Highlight 'Browser' and 'Select' (left soft key).
• Highlight 'Browser profiles' and 'Select' (left soft key).
• press 'Options' (left soft key).
• Highlight 'Add new connection' and 'Select' (left soft key).
  When entering the following information do not press 'Save' until told to in the instructions.
• Highlight ‘Profile name’ enter : victoria mobile
• Highligh ‘Home URL’ and enter www.victoriamobile.cz
• Check 'Proxy: disable
• Check 'DNS' is unticked (press Navi key to untick).
• Highlight 'Bearer' and select 'GPRS' by pressing the Navi key to the right.
• Highlight 'Advanced settings' and select by pressing the Navi key.
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'Login ID' and enter lmde
• Highlight: plus and enter: plus
• Press 'Save' twice (left soft key).
• Highlight victoria mobile and press the Navi key to make it active.

• Press 'Menu' (left soft key)
• Scroll to 'Funbox' and select (left soft key)
• Highlight 'WWW services' and select (left soft key)
• Highlight 'Proxy settings' and select (left soft key): disable
• Highlight a new profile and select (left soft key)
• Highlight the 'Proxy Name' and select (left soft key). Enter victoria mobile and press 'OK' (left soft key)
• Highlight 'GPRS setting' and select (left soft key)
• Highlight 'Gateway' and select (left soft key)
• Highlight 'IP address'
• Press 'Back' (right soft key)
• Highlight 'APN' and select (left soft key), enter data.victoriamobile.cz and press 'OK' (left soft key)
• Highlight 'Login Id' and select (left soft key). Enter lmde and press 'OK' (left soft key)
• Highlight: plus and select (left soft key). Enter: plus and press 'OK' (left soft key)
• Press 'Back' (right soft key)
• Highlight 'Home URL' and select (left soft key). Enter www.victoriamobile.cz and press 'OK' (left soft key).
• Highlight 'Bearer' and select (left soft key). scroll to and select 'GPRS only' (left soft key)
• Press 'Back' twice (right soft key)
• Highlight 'Current Proxy' and select (left soft key).
• Highlight lmde and select (left soft key).
• Press 'Back' three times (right soft key)

• Press the Menu button (left soft key).
• Scroll to 'Browser' and press select (left softkey).
• Highlight 'Profile settings' and press select (left softkey).
• Highlight the next available Profile (e.g. Profile 1), then press select (left softkey).
• Highlight 'Profile name'. Enter: victoria mobile
• Highlight 'Home URL'. Enter:www.victoriamobile.cz
• Highlight 'Bearer'. Select 'GPRS only' pressing right directional Navi key.
• Highlight 'Proxy'. Select 'Enable' pressing right directional Navi key.
• Highlight 'GPRS settings' then press the Navi key to select.
• Highlight 'APN'. Enter: data.victoriamobile.cz
• Highlight 'Login ID'. Enter: lmde
• Highlight: plus. Enter: plus
• Press Save (left softkey).
• Then press Save again (left soft key).
• Press Back (right softkey).
• Highlight 'Current profile' and press select (left softkey).
• Highlight the profile which has been created and press select (left softkey).
• Press Back (right softkey) 2 times to return to the standby screen.

• Press the Menu button (left softkey).
• Scroll to 'Settings' and press select (left softkey).
• Highlight 'Connection Settings' and press select (left softkey).
• Select 'Options' (Left softkey)
• Highlight 'Add new connection' and press Select (Left softkey)
• Highlight 'Profile Name'. Enter victoria mobile
• Highlight 'Home URL'. Enter www.victoriamobile.cz
• Highlight 'Proxy' : disable
• Highlight 'DNS'. (Check that it is Un-ticked) Select Tick to Un-tick (Navi Key)
• Highlight 'Bearer'. Press Left directional key till 'GPRS' is displayed.
• Highlight 'Advanced Settings' Press Tick (Navi Key).
• Highlight 'APN'. Enter data.victoriamobile.cz
• Highlight 'Login ID' Enter lmde
• Highlight: plus Enter: plus
• Press 'Save' (Left soft key)
• Press 'Save' (Left soft key)
• Press Back (right softkey) 3 times to return to the standby screen.
• Press 'Menu' button (Left soft key)
• Scroll to 'Browser' and press Select (Left soft key)
• Highlight 'WAP profile' and press Select (Left soft key)
• Highlight 'victoria mobile and press Select (Left soft key)
• Highlight 'Activate' and press Select (Left soft key)
• Press back (Right soft key) 2 times to return to the standby screen.

• While on the standby screen press 'Menu' (Left Soft Key)
• Scroll to 'Funbox' and press 'Select' (Left Soft Key)
• Highlight 'WWW services' and press 'Select' (Left Soft Key)
• Highlight 'Proxy settings' : disable
• Highlight 'GPRS setting' and press 'Select' (Left Soft Key)
• Highlight 'APN' and press 'Select' (Left Soft Key) enter data.victoriamobile.cz and press 'OK' (Left Soft Key)
• Highlight 'Login Id' and press 'Select' (Left Soft Key) enter lmde and press 'OK' (Left soft Key)
• Highlight: plus and press 'Select' (Left Soft Key) enter: plus and press 'OK' (Left Soft Key)
• Press 'Back (Right Soft Key)
• Highlight 'Home URL' and press 'Select' (Left Soft Key) enter www.victoriamobile.cz and press 'OK' (Left Soft Key)
• Highlight 'Bearer' and press 'Select' (Left Soft Key) select 'GPRS only' and press 'Select' (Left Soft Key)
• Press 'Back' (Right Soft key)
• Highlight 'Current Proxy' and press 'Select' (Left Soft Key) highlight lmde and press 'Select' (Left Soft Key)
• Press Back (Left Soft Key) three time to get back to the stand by screen

• Press the Menu button (left softkey).
• Scroll to 'Settings' and press select (left softkey).
• Highlight 'Connection Settings' and press select (left softkey).
• Highlight victoria mobile and press Options
• Highlight 'Add new connection' and press Select (Left softkey)
• Highlight 'Profile Name'. Enter victoria mobile
• Highlight 'Home URL'. Enter www.victoriamobile.cz
• Highlight 'Proxy' and press Tick (Navi Key): disable
• Highlight 'DNS'. (Check that it is Un-ticked) Select Tick to Un-tick (Navi Key)
• Highlight 'Bearer'. Press Left directional key till 'GPRS' is displayed.
• Highlight 'Advanced Settings' Press Tick (Navi Key).
• Highlight 'APN'. Enter : data.victoriamobile.cz
• Highlight 'Login ID' Enter : lmde
• Highlight: plus Enter: plus
• Press 'Save' (Left soft key)
• Press 'Save' (Left soft key)
• Press Back (right softkey) 3 times to return to the standby screen.
• Press 'Menu' button (Left soft key)
• Scroll to 'Browser' and press Select (Left soft key)
• Highlight 'WAP profile' and press Select (Left soft key)
• Highlight victoria mobile and press Select (Left soft key)
• Highlight 'Activate' and press Select (Left soft key)
• Press back (Right soft key) 2 times to return to the standby screen.

The handset has a 4 way 'Navi' pad and two Soft Keys.

• While on the standby screen press 'Menu' (Left Soft Key)
• Scroll to 'Funbox' and press 'Select' (Left Soft Key)
• Highlight 'WWW services' and press 'Select' (Left Soft Key)
• Highlight 'Proxy settings: disable
• Highlight 'GPRS setting' and press 'Select' (Left Soft Key)
• Highlight 'Gateway' and press 'Select' (Left Soft Key)
• Highlight 'APN' and press 'Select' (Left Soft Key) enter data.victoriamobile.cz and press 'OK' (Left Soft Key)
• Highlight 'Login Id' and press 'Select' (Left Soft Key) enter lmde and press 'OK' (Left soft Key)
• Highlight: plus and press 'Select' (Left Soft Key) enter: plus and press 'OK' (Left Soft Key)
• Press 'Back (Right Soft Key)
• Highlight 'Home URL' and press 'Select' (Left Soft Key) enter www.victoriamobile.cz and press 'OK' (Left Soft Key)
• Highlight 'Bearer' and press 'Select' (Left Soft Key) select 'GPRS only' then press 'Select' (Left Soft Key)
• Press 'Back' (Right Soft key)
• Highlight 'Current Proxy' and press 'Select' (Left Soft Key) highlight lmdeand press 'Select' (Left Soft Key)
• Press Back (Left Soft Key) three time to get back to the stand by screen

• Press the Menu button (left softkey).
• Highlight 'Browser' and press 'Select' (left softkey).
• Highlight 'Browser settings' and press 'Select' (left soft key).
• Highlight 'Browser profiles' and press 'Select' (left soft key).
• Press 'Options' (left softkey), highlight 'Add new connection' and 'Select'.
• Highlight 'Profile Name' and enter victoria mobile
• Highlight 'Homepage URL' and enter www.victoriamobile.cz
• Highlight 'Proxy' and tick the box (press Navi key).
• Ignore 'Linger time'.
• Ignore 'DNS'.
• Highlight 'Bearer' and select 'GPRS' using left or right Navi key.
• Highlight 'Advanced settings' and select (press Navi key).
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'Login ID' and enter : lmde
• Highlight: plus and enter: plus
• Press 'Save' twice (left softkey).
• Highlight victoria mobile and press 'Options', highlight 'Activate' and 'Select' (left softkey).
• Press 'Back' twice (right softkey) to return to the standby screen.

• Press the Menu button (Navi key).
• Highlight 'Internet' and 'Select' (left softkey).
• Highlight 'Browser settings' and 'Select' (left softkey).
• Press 'Options' (left softkey).
• Highlight 'Create' and 'Select' (left softkey).
• Highlight 'Set name' and enter victoria mobile
• Highlight 'Access name' and enter data.victoriamobile.cz
• Highlight 'Auth type' and select 'Normal' by pressing the Navi key to the right.
• Highlight 'User ID' and enter lmde
• Highlight: plus and enter: plus
• Highlight 'Protocal' and select 'HTTP' by pressing the Navi key to the right.
• Highlight 'Home URL' and enter www.victoriamobile.cz
• Highlight 'Advanced settings'.
• Ignore 'Static IP' and Static DNS' this should be left unticked and blank.
• Highlight 'Traffic class' and select (press the Navi key), highlight 'Subscribed' and 'OK' (left softkey).
• Press 'OK' (left softkey).
• Press 'Save' (left softkey).
• Highlight victoria mobile and save (press Navi key), then press 'OK' (left softkey).
• Press 'Back' (right softkey) 2 times to return to the standby screen.

• Press the Menu key
• Tap Settings
• Tap Wireless controls
• Tap Mobile networks
• Tap Access Point Names
• Press the Menu key
• Tap New APN
• Tap Name then tap the text box and enter victoria mobile then tap OK
• Tap APN then tap the text box and enter
  data.victoriamobile.cz then tap OK
• Tap Proxy : disable
• Tap Username then tap the text box and enter lmde then tap OK
• Tap Password then tap the text box and enter password: plus then tap OK
• Highlight APN type and tap
• Tap APN type then tap internet (so a green dot appears next to it)
• Press the Back key five times to return to the standby screen.
• www.victoriamobile.cz

• Press the 'i' button (press navi key).
• Highlight 'Browser' and press 'Select' (left softkey).
• Highlight 'Browser settings' and press 'Select' (left softkey).
• Press 'Options' (left softkey) , highlight 'Add new connection' and 'Select' (left softkey).
• Highlight 'Profile Name' and enter victoria mobile
• Highlight 'Homepage URL' and enter www.victoriamobile.cz
• Check that 'Proxy: disabled (press Navi key to tick/untick).
• Ignore 'Linger time' (this is preset at 90).
• Check that 'DNS' is unticked (press Navi key to tick/untick).
• Highlight 'Bearer' and select 'GPRS' by pressing the Navi key right or left.
• Highlight 'Advanced settings' and select using center Navi key.
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'Login ID' and enter lmde
• Highlight: plus and enter: plus
• Press 'Save' twice (left softkey).
• Highlight victoria mobile and press 'Options' (left softkey)
• Highlight 'Activate' and 'Select' (left softkey).
• Press 'Back' (right softkey) 3 times to return to the main screen.

• Press 'Menu' (left softkey).
• Highlight 'Fun box' and 'Select' (press left softkey).
• Highlight 'WWW services' and 'Select' (press left softkey).
• Highlight 'Proxy setttings' and 'Select' (press left softkey): disable
• Highlight a free profile and 'Select' (press left softkey).
• Highlight 'Profile name' and 'Select' (press left softkey), enter victoria mobile and 'Save' (left softkey).
• Highlight 'Home URL' and 'Select' (press left softkey), enter www.victoriamobile.cz and 'Save' (left softkey).
• Highlight 'Bearer' and 'Select' (press left softkey), highlight 'GPRS only' and 'Select' (left softkey).
• Highlight 'Proxy use' and 'Select' (press left softkey), highlight disable' and 'Select' (left softkey).
• Highlight 'GPRS settings' and 'Select' (press left softkey).
• Highlight 'APN' and 'Select' (press left softkey), enter data.victoriamobile.cz and 'Save' (left softkey).
• Highlight 'Login ID' and 'Select' (press left softkey), enter lmde and 'Save' (left softkey).
• Highlight: plus and 'Select' (press left softkey), enter: plus and 'Save' (left softkey).
• Press 'Back' (right softkey) three times.
• Highlight 'Current proxy' and 'Select' (left softkey).
• Highlight victoria mobile and 'Select' (press left softkey).
• Press 'Back' (right softkey) three times to return to the standby screen.

• Tap Menu.
• Tap Settings
• Tap Application settings
• Tap Browser profiles
• Tap Create
• Tap the Set name box and enter victoria mobile then tap Done
• Tap the Access name box and enter data.victoriamobile.cz then tap Done
• Tap the Auth type drop down button and tap Normal
• Tap the User ID box and enter lmde then tap Done
• Tap the Password box and enter password: plus then tap Done
• Tap the Protocol drop down button and tap HTTP
• Tap the Home URL box and enter www.victoriamobile.cz then tap Done
• Tap the Proxy address : disable then tap Done
• Tap the Linger time (sec) then tap Done
• Tap Save
• Tap victoria mobile to make it active (a dot should appear next to the active profile)
• Press the Back button three times to return to the standby screen.

• Press 'Menu' (left softkey).
• Highlight 'Browser' and 'Select' (left softkey).
• Highlight 'WAP Profile' and 'Select' (left softkey).
• Highlight the next available profile e.g. Profile 2 and press 'Options' (left softkey), highlight 'Edit' and 'Select' (left softkey).
• Highlight 'Profile Name' and enter victoria mobile
• Highlight 'Homepage URL' and enter www.victoriamobile.cz
• Highlight 'Proxy' : disable
• Highlight 'IP Address' and enter '
• Highlight 'Port' and enter
• Ignore 'DNS'.
• Highlight 'Bearer' and select 'GPRS' (press Navi key to the right to change).
• Highlight 'Avdanced Settings' and select (press the 'OK' button).
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'Login ID' and enter lmde
• Highlight: plus and enter: plus
• Press 'Save' twice (left softkey).
• Highlight victoria mobile and press 'Options' (left softkey).
• Highlight 'Activate' and 'Select' (left softkey).

• Tap the Menu icon.
• Tap the 'Browser' icon.
• Highlight 'Browser settings' and tap the tick icon.
• Highlight 'Browser profiles' and tap the tick icon.
• Tap the sub menu icon (bottom lefthand corner), highlight 'Add new connection' and tap the tick icon.
• Highlight 'Profile name' and and tap, enter victoria mobile and tap 'OK'.
• Highlight 'Homepage URL' and tap, enter www.victoriamobile.cz and tap 'OK'.
• Highlight 'Proxy' and tick the box (tap to tick/untick).: disable
• Highlight 'Port' and tap,
• Ignore 'DNS' this should be left unticked.
• Highlight 'Bearer' and select 'GPRS' (tap to select).
• Highlight 'Advanced settings' and tap.
• Highlight 'APN' and tap, enter data.victoriamobile.cz and tap 'OK'.
• Highlight 'Login ID' and tap, enter lmde and tap 'OK'.
• Highlight: plus and tap, enter: plus and tap 'OK'.
• Tap 'Save' twice (bottom lefthand corner).
• Highlight victoria mobile tap the sub menu icon (bottom lefthand corner), highlight 'Activate' and tap the tick icon.
• Tap 'Back' (bottom righthand corner) 3 times to return to the standby screen.

Please note all steps must be completed to ensure the settings are correctly configured.

• Tap the Menu icon.
• Tap ‘Settings’.
• Tap ‘Application settings’.
• Tap 'Browser profiles'.
• Tap 'Create'.
• Tap ‘Set name’ enter victoria mobile then tap 'Done' or 'Save'.
• Tap ‘Access name’ enter data.victoriamobile.cz and then tap 'Done'or 'Save'.
• Skip past 'Auth type' as this is preset at 'Normal'.
• Tap ‘User ID’ enter : lmde and then tap 'Done' or 'Save'.
• Tap 'Password' enter 'password: plus , then tap 'Done' or 'Save'.
• Skip past 'Protocol' as this is preset at 'HTTP'.
• Tap ‘Home URL’ enter www.victoriamobile.cz and then tap 'Done' or 'Save'.
• Tap ‘Proxy address: disable.
• Skip past 'Advanced settings' as these are all preset blank.
• Tap 'Save'.
• Tap victoria mobile to make it active.

• Select Internet
• Select Settings
• Select Internet Profiles
• Select Create new profile
• Name: victoria mobile
• Home page :www.victoriamobile.cz
• Bearer: GPRS only
• Proxy: disabled
• Proxy Address:
• Port:
• DNS 1: blank
• DNS 2: blank
• GPRS settings
• APN: data.victoriamobile.cz
• User id: lmde
• Password: plus
• Select Save

• i-Mode Settings
• The i-Mode settings are pre-installed and cannot be amended.
• You/Customers may choose to switch between settings depending on which type of SIM they have in their handset.
• To switch settings follow the instructions below.
• Press the Menu button (press Navi key).
• Highlight 'Settings' and select (press Navi key).
• Scroll to 'i-mode settings' and select (press Navi key).
• Press 'Save' (left softkey).
• Enter default password : plus and 'OK' (left softkey).
• www.victoriamobile.cz

• Go to mobiles Network and Access point menu.

There will be operators setting don't use any of them
data.victoriamobile.cz

• Name: victoria mobile
• Access Point Name (APN): data.victoriamobile.cz
• Proxy: Disable
• Home Page: www.victoriamobile.cz
• Username: lmde
• Password:plus
• APN Type: Default
• Leave all other entries as it is.
• Save this setting.
• Now you can see new added APN is in the list. Select it.
• Turn of Wi-Fi, if it is already ON.
• Restart your phone.
• Now you can see Edge icon.
• It means your successfully

• WAP Setup:
• From the main menu select Browser.
• Select Proxy Settings: disable
• Select an empty profile.
• Profile Name: victoria mobile
• Home URL:www.victoriamobile.cz
• Bearer: GPRS Only
• Proxy: disable
• Highlight GPRS Settings.
• Press OK.
• IP Address:
• Port: 8080
• APN: data.victoriamobile.cz
• Login ID: lmde
• Password: plus
• Press Save.
• Press Save (Again).
• Press Back.
• Select Current Proxy.

• Manual Gprs Settings
• Homepage – www.victoriamobile.cz
• User Name – lmde
• Password – plus
• Proxy – disabled/yes.
• Proxy and Server Adress –
• Proxy and Server Port –
• Data bearer – GPRS or Packet Data.
• Access Point Name – data.victoriamobile.cz
• Authentication Type – Normal
• Use preferred access point – No

• OT-800 is similar to the OT-808 I just set up internet for my youngest, try the the following steps.
• Menu> settings> connectivity> data account> gprs> options> create>
• Account Name: victoria mobile > options > done >APN: data.victoriamobile.cz> options> done>
• username : lmde >options > done>
• password = plus > options > done > done > back > back>
• You should now be back at the connectivity menu.
• Now select web>create>profile name: victoria mobile>options>done>homepage = www.victoriamobile.cz>
• proxy: off
• You should now be back at the settings.

• Open Menu -> Settings -> Connectivity.
• Highlight EGPRS and press top middle button.
• Select Yes on the question "Switch EGPRS on?"
• Open Online settings.
• Scroll to the desired profile and press Options then select Rename.
• Type victoria mobile and then press top middle button.
• Highlight victoria mobile and press Options, then select Edit.
• Select NAP tab.
• Scroll to the desire profile and press Edit.
• Select GPRS.
• Fill your parameters as shown below.
  • Name: victoria mobile
  • APN: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
  • Linger time
• Press Options and select Save.
• Select Proxy tab.
• Scroll to the desired profile and press Edit.
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Username: lmde
  • Password: plus
  • Address type
  • Address
  • Port
• Select Connect. list
• Scroll to the desire profile and press Options then select Select connection.
• Highlight victoria mobile and press Select.
• Highlight victoria mobile and press Options then select Save.
• Select Options -> Save.
• Select Application tab. -> WAP browser.
• Scroll to the desire profile and press top middle button.
• Select Options then select Edit.
• Select Profile name and type victoria mobile.
• Select Connect. list and press top middle button.
• Scroll to the desire profile and press Options then select victoria mobile proxy.
• Highlight victoria mobile and press Select.
• Highlight victoria mobile and press Options then select Save.
• Select Homepage.
• Type http://wap.victoriamobile.cz and select Options -> Save.
• Select Options -> Save.
• Return to Online settings.
• Highlight victoria mobile and press top middle button.
• To start WAP session select Menu -> Internet -> Internet.
• Press Options and select Homepage.
• Press YES on the question "You are about to go online"
• To finish WAP session press and hold NO.

• Open Menu -> Settings -> Connectivity.
• Open Connect. profile.
• Scroll to the desired profile and press Options, then select Edit.
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Username: lmde
  • Password: plus
  • Apn: data.victoriamobile.cz
  • Aunthetication: none
• Press Options -> Save.
• Return to Connectivity and then select Internet profiles.
• Scroll to the desired profile and press Options, then select Edit.
• Fill your parameters as shown below:
  • Profile name: victoria mobile
  • Type:
  • Security: none
  • Proxy server
  • Proxy port
  • Username: lmde
  • Password: plus
• Press Options -> Save.
• Return to Menu and then open Internet -> Browser settings -> Browser profile.
• Scroll to the desired profile and press Options, then select Edit.
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Connect profile: victoria mobile
  • Internet profile: victoria mobile
  • Start page: www.victoriamobile.cz
• Press Save.
• Highlight victoria mobile and press Options, then select Select.
• To start WAP session return to Internet and select Enter URL
• Type http://www.victoriamobile.cz and press top middle button.
• To finish press No

• Open Menu -> Services -> NAP Settings.
• Press Options then select Add and press OK.
• Select GPRS NAP.
• Fill your parameters as shown below:
  • Name: victoria mobile
  • Username: lmde
  • Password: plus
  • Apn : data.victoriamobile.cz
• Press Save.
• Return to Services and select WAP Services -> WAP Settings.
• Press Options then select Add Profile and press OK.
• Fill your parameters as shown below:
  • Profile name: victoria mobile
  • Ip address:
  • Port
  • Homepage:www.victoriamobile.cz
  • Connecting profile: victoria mobile.
• Select NAP -> First NAP
• Highlight victoria mobile and then press OK.
• Press Back and then press Save.
• Highlight victoria mobile and then press joystick.
• To start WAP session return to WAP Services and select Start Browser.
• To finish WAP session press and hold NO.

• APN: data.victoriamobile.cz
• Proxy: Leave Blank
• Prot: Leave Blank
• UserName: lmde
• Password: plus
• Server: Leave Blank
• MMSC: Leave Blank
• MMS proxy: Leave Blank
• MMS port: Leave Blank
• MCC: Leave Blank
• MNC: Leave Blank
• APN Type: Leave Blank

Please note all steps must be completed to ensure the settings are correctly configured.

This phone has a 4-way directional Navi key and 2 soft keys on the bottom of the screen. The Navi key can also be pressed to select options.

• Tap Menu
• Tap Services
• Tap Data Account
• Tap GPRS
• Use the Navi key to highlight the account you wish to add/edit and then tap Edit (left soft key)
• Highlight Account name and tap Edit (left soft key)
• Enter victoria mobile and Go then tap Options (left soft key), tap Done
• Highlight APN and tap Edit (left soft key)
• Enter data.victoriamobile.cz then tap Options (left soft key), tap Done
• Highlight Username and tap Edit (left soft key): lmde
• Enter victoria mobile then tap Options (left soft key), tap Done
• Highlight Password and tap Edit (left soft key): plus
• Enter password then tap Options (left soft key), tap Done
• Highlight Auth. type and check that this is set at Normal, if not then press the Navi key left/right to select
• Tap Done (right soft key)
• Tap Yes (left soft key) to the question Save?
• Tap Back (right soft key) twice
• Tap WAP
• Tap Settings
• Tap Edit profile
• Tap victoria mobile
• Tap Activate profile
• Tap Back (right soft key) five times to return to the standby screen.

• : Follow the instructions to set up your phone:
  you have to set up which connection java applications may use. Do this by selecting "Settings" in your phone’s main menu, go to "Connectivity" by pressing right, go down to "Settings for Java", push "Select" and then select the GPRS connection you want to use.
• Click Start > Settings > the Connections tab > the icon Connections.
• Under My ISP click Add a new modem connection.
• Enter a name for the connection, for example victoria mobile
• Select victoria mobile under Select a modem.
• Press the Next-button.
• Enter the access point name under APN: data.victoriamobile.cz
• Username: lmde
• Password : plus
• Press the Next-button.
• Press Finish.
• Press OK.
• Press OK.

• Select Start -> Settings.
• Select Connections tab -> Connections.
• Under My ISP select Add a new modem connection.
• Fill your parameters as shown below.
  • Account name: victoria mobile
  • Select modem
  • Select next
  • Apn.data.victoriamobile.cz
• Select Next -> Advanced.
• Select TCP/IP tab.
• Check Use server-assigned IP address.
• Select Servers tab.
• Check Use server-assigned IP address.
• Select OK and then Finish.
• To start Internet select Start at the top left corner, then select Internet Explorer.

• Press Start and then select Settings -> Connections -> GPRS
• Press Menu and then select Add.
• Fill your parameters as shown below:
  • Description: victoria mobile
  • Connects to: The Internet
  • Access Point: data.victoriamobile.cz
  • User Name: lmde
  • Password: plus
  • Primary DNS
  • Secondary DNS:
  • IP Address:
• Press Done three times.
• Return to Start and then select Internet explorer.
• Press Menu and then select Options -> Connections.
• Highlight Select network.
• By pressing joystick left or right select The Internet.
• Press Done two times.
• To start internet session press Menu and then select Address bar.
• Type site address that you want to view.

• Settings -> General->Network ->EDGE.
  • Access point name: data.victoriamobile.cz

• Settings -> General->Network ->
• 3g-on
• Data roaming-off
• Internet tethering-off

• Go to Menu>settings>connectivity>Data Accounts>GPRS
• Press option>Add
• type the same
• Account name : victoria mobile
• APN : data.victoriamobile.cz
• username : lmde
• password : plus
• Auth.type : Normal
• Primary DNS :000.000.000.000
• Secondary DNS : 000.000.000.000
• Press done.
• Again go to
• menu>services>WAP>settings>profiles>se… ur sim>edit any profile>
• type the same
• Profile name :victoria mobile
• Home page : http//www.victoriamobile.cz (optional)
• Data accounts : selesct GPRS>victoria mobile
• Connecting type : HTTP
• username : lmde
• password : plus
• Press done and save the settings.
• now switch off your mobile and on later.
• Thats all your GPRS is activated, always use opera mini in ur Q5 for good browsing experience
• modify your network profile, for opera mini, ebuddy ,nimbus etc….

• Step 1 : Goto -Menu>>Connectivity>>Wap>>setting>>Profile>>SIM 1>>
• Here you will see various Internet settings of Various Telecom operators. Here you have to select "victoria mobile" and Activate it.
• Step 2: : Goto -Menu>>Connectivity>>Data Account>>GPRS>>
• create new as: victoria mobile
• Goto -Menu>>Connectivity>>Data Account>>GPRS>>Option>Add>
  • Account name: victoria mobile
  • APN: data.victoriamobile.cz
• set remaining field as it is. Save the settings
  • Username: lmde
  • Password: plus

• Connection Name : victoria mobile
• Data Bearer : packet data
• Access point name : data.victoriamobile.cz
• User name : lmde
• Prompt Password : No
• Password : plus
• Authentication : Normal
• Gateway IP address :
• Homepage : http://www.victoriamobile.cz
• Connection Security : Off
• Session mode : Permanent
• GPRS connection : Always Online
• Login type : Automatic

• Settings - Automatic Setup
• Automatic victoria mobile Operator settings
• To download all MMS/GPRS/GSM settings please do the following;
  • ap 'Start'.
  • Tap 'Programs'.
  • Tap victoria mobile
  • Check that the 'I want to do auto configuration now...' box is ticked.
  • Tap on the drop down box and tap the settings you require.
  • Tap 'OK'.
  • The phone will now download the settings then ask you to restart the phone for the settings to work.

• Tap Start
• Tap Settings
• Tap the Connections tab
• Tap the Connections icon
• Under 'Internet Settings' drop-doen box should be set 'New..'
• Rename 'My Connection' to victoria mobile
• Tap 'Modem' tab
• Tap 'New...'
• The 'Select a modem:' drop-down box should be set to victoria mobile (GPRS)'
• Tap 'Advanced'
• Tap 'OK'
• Tap 'Next'
• Access Point Name: data.victoriamobile.cz
• Tap 'Finish'
• Tap 'Proxy Settings: disable
• Ensure that 'This network connects to the Internet' box is ticked
• Tap 'Advanced'
• homepage: www.victoriamobile.cz
• username: lmde
• password: plus
• Tap 'OK' four times to exit

*PLEASE NOTE* - All steps must be completed to ensure the settings are correctly configured.

• Tap 'Start'.
• Tap 'Settings'.
• Tap the 'Connections' tab.
• Tap 'Connections'.
• Select 'Add a new modem connection'.
• Enter name for connection of victoria mobile
• Select modem type, choose victoria mobile
• Tap 'Next'.
• Enter Access Point Name of data.victoriamobile.cz
• Tap 'Next'.
• Enter the username of : lmde
• Enter the password of : plus.
• Ignore 'Domain' and tap 'Finish'.

• Press 'Start' (left soft key).
• Press 'More' (left soft key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Connections' and select (press Navi key).
• Highlight 'GPRS' and select (press Navi key).
• Highlight 'New' and select (press Navi key).
• Highlight 'Discription' and enter victoria mobile
• Highlight 'Connects to' and select 'Palm work' by pressing the Navi key to the left or right.
• Highlight 'Access point' and enter : data.victoriamobile.cz
• Highlight 'User name' : lmde
• Highlight 'Password' : plus
• Highlight 'Authentication Type' and select 'None' by pressing the Navi key to the left or right.
• Ignore 'Primary DNS', 'Secondary DNS' and 'IP address' as these are preset blank.
• Press 'Done' (left soft key).
• Press the Home button to return to the main screen.

• Open Menu -> Setup -> Connectivity.
• If GPRS point unchecked then check it.
• If Authentication point checked then uncheck it.
• Open Connection profiles.
• Scroll to the desired profile and press Options.
• Select Rename and type victoria mobile, then press Save.
• Highlight victoria mobile and then press Edit.
• Press YES on the question "Changes may affect application. Continue?"
• If GPRS point unchecked then check it.
• Highlight GPRS settings and press Edit.
• Fill your parameters as shown below.
  • Access Point: data.victoriamobile.cz
  • User Name: lmde
  • Password: plus
• Press Save.
• Return to Menu and then open Surf & fun -> Internet -> Profiles.
• Scroll to the desired profile and press Edit to access available options.
• Fill your parameters as shown below.
  • Profile name: victoria mobile
  • Ip address:
  • Port:
  • Home page: www.victoriamobile.cz
• Connecting profile: victoria mobile
• Press Save.
• Highlight victoria mobile and press Select.
• To start WAP session return to Internet and select Homepage.
• To finish WAP session press and hold NO.

*PLEASE NOTE* - All steps must be completed to ensure the settings are correctly configured.

• Tap 'Settings'.
• Tap the 'Connections' tab.
• Tap 'Connections'.
• Select 'Add a new modem connection'.
• Enter name for connection of victoria mobile
• Select modem type, choose victoria mobile
• Tap 'Next'.
• Enter Access Point Name of : data.victoriamobile.cz
• Tap 'Next'.
• Enter the username : lmde
• Enter the password : plus
• Ignore 'Domain' and tap 'Finish'.
• Ignore 'Domain' and tap 'Finish'.

• Open Menu -> Setup -> Connectivity.
• If GPRS point unchecked then check it.
• If Authentication point checked then uncheck it.
• Open Connection profile.
• Scroll to the desired profile and press Options.
• Select Rename and type victoria mobile, then press Save.
• Highlight victoria mobile and then press Edit.
• Press YES on the question "Changes may affect application. Continue?"
• If GPRS settings point unchecked then check it.
• Highlight GPRS settings and then press Edit.
• Fill your parameters as shown below:
  • APN: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
• Press Save.
• Return to Menu and then open Surf & fun -> Internet -> Profiles.
• Scroll to the desired profile and press Edit.
• Fill your parameters as shown below.
  • Profile name: victoria mobile
  • Ip address:
  • Port
  • Homepage:www.victoriamobile.cz
  • Connecting profile: victoria mobile.
• Press Save.
• Highlight victoria mobile and then press Select.
• To start WAP session return to Internet and select Homepage.
• To finish WAP session press and hold NO.

• Open Menu -> Settings -> Connectivity -> Bearer settings -> GPRS settings.
• Scroll to the desired profile and press Select.
• Fill your parameters as shown below.
  • Profile name: victoria mobile
  • Apn : data.victoriamobile.cz
  • Aunthtication : normal
  • Username: lmde
  • Password: plus
  • Dns
• Press Save.
• Return to Menu and open Surf & Fun -> Profiles.
• Scroll to the desired profile and press Edit.
• Fill your parameters as shown below.
  • Profile name: victoria mobile
  • Ip address:
  • Port
  • Homepage:www.victoriamobile.cz
  • Connecting profile: victoria mobile.
  • Select mode: bearer
  • Gprs bearer: victoria mobile.
• Press Save.
• Highlight victoria mobile and then press Activate.
• To start WAP session return to Surf & Fun and select Homepage.
• To finish WAP session press and hold NO.

• Open Menu -> Setup -> Connectivity.
• If GPRS point unchecked then check it.
• If Authentication point checked then uncheck it.
• Open Data services -> MMS, WAP.
• Scroll to the desired profile and press Options.
• Select Rename and type victoria mobile, then press Save.
• Highlight victoria mobile and then press Edit.
• Press YES on the question "Changes may affect application. Continue?"
• If GPRS settings point unchecked then check it.
• Highlight GPRS settings and then press Edit.
• Fill your parameters as shown below:
  • Username: lmde
  • Password: plus
  • Apn: data.victoriamobile.cz
• Press Save.
• Return to Menu and then open Surf & fun -> Internet -> Profiles.
• Scroll to the desired profile and press Edit.
• Fill your parameters as shown below:
  • Profile name: victoria mobile
  • Ip address:
  • Port
  • Homepage:www.victoriamobile.cz
  • Connecting profile: victoria mobile.
  • Select mode: bearer
  • Gprs bearer: victoria mobile.
• Press Save.
• Highlight victoria mobile and then press Select.
• To start WAP session return to Internet and select Homepage.
• To finish WAP session press and hold NO.

• Select Start -> Settings.
• Select Connections tab -> Connections.
• Under My ISP select Add a new modem connection.
• Fill your parameters as shown below:
  • Enter Connection Name: victoria mobile
  • Select Modem:
• Select Next.
• Access Point Name: data.victoriamobile.cz
• Select Next -> Advanced.
• Select TCP/IP tab.
• Check Use server-assigned IP address.
• Select Servers tab.
• Check Use server-assigned IP address.
• Select OK and then Finish.
• To start Internet select Start at the top left corner, then select Internet Explorer.

• Step 1: Contact your provider to configure your internet settings by manual settings.
• Step 2: Follow the instructions to set up your phone:
• After step 1 and 2 you have to set up which connection java applications may use. Do this by selecting "Settings" in your phone’s main menu, go to "Connectivity" by pressing right, go down to "Settings for Java", push "Select" and then select the GPRS connection you want to use.
• If step one for some reason hasn’t worked, you may also set up your phone’s configuration manually:
• Click Start > Settings > the Connections tab > the icon Connections.
• Under My ISP click Add a new modem connection.
• Enter a name for the connection, for example internet,home page: www.victoriamobile.cz
• Select victoria mobile under Select a modem.
• Press the Next-button.
• Enter the access point name under APN:data.victoriamobile.cz
• and
• Username: lmde and
• Password: plus if requested
• (click here to check your settings)
• Press the Next-button.
• Press Finish.
• Press OK.
• Press OK.
• After setting up your phone continue with step 2

You'll need to complete all steps for this to work.

• Tap the Windows icon soft key
• Tap Settings
• Tap Menu
• Tap All Settings
• Tap Connections
• Tap Connections again
• Under the My ISP heading, tap Add a new modem connection
• Enter a name for the connection victoria mobile
• Select modem type, choose victoria mobile
• Tap Next
• Enter the Access point name of data.victoriamobile.cz
• Tap Next
• Enter the Username : lmde
• Enter the password : plus
• Skip past Domain and tap Finish.
• Switch your handset off and then back on to complete your settings.
• However if you are still experiencing any issues using this service.

• Account Name: victoria mobile
• Homepage: www.victoriamobile.cz
• User Name: lmde
• Pass:plus
• Access Point Settings:data.victoriamobile.cz
• Proxy: disabled
• Proxy Address:
• Proxy Port:
• Data Bearer: Packet Data
• Bearer Settings:
• Packet Data Access Point: data.victoriamobile.cz
• Network type: IPV4
• Authentication: normal
• User Name: lmde
• Password: plus

• After step 1 and 2 you have to set up which connection java applications may use. Do this by selecting "Settings" in your phone’s main menu, go to "Connectivity" by pressing right, go down to "Settings for Java", push "Select" and then select the GPRS connection you want to use.
• If step one for some reason hasn’t worked, you may also set up your phone’s configuration manually:
• Click Start > Settings > the Connections tab > the icon Connections.
• Under My ISP click Add a new modem connection.
• Enter a name for the connection, for example victoria mobile
• Select victoria mobile under Select a modem.
• Press the Next-button.
• Enter the access point name under APN:
  data.victoriamobile.cz
• Username: lmde
• Password : plus
• webpage: www.victoriamobile.cz
• (click here to check your settings)
• Press the Next-button.
• Press Finish.
• Press OK.
• Press OK.

• First go to Settings -> Connections -> victoria mobile (or create if you dont have this already)
• Connects to: Work
• Access point: data.victoriamobile.cz
• User name: lmde
• Password: plus
• webpage: www.victoriamobile.cz
• Authentication type: Select the option ‘None’
• Primary DNS: (empty)
• 2nd DNS: (empty)
• IP Address:
• Then go to Settings ->Proxy -> : disable
• Connects from: Work
• Connects to: WAP Network
• Proxy (Name:port):
• Type: Select ‘HTTP’
• User Name:
• Password:
• Open Internet Explorer -> Tool -> Options -> Connections
• Un-check the Automatically Detect Settings option
• Select Network: victoria mobile Network

• Name: victoria mobile
• APN: data.victoriamobile.cz
• username: lmde
• password: plus
• MMSC:
• MMS Proxy: disable
• MMS Port:
• APN type:
• webpage:www.victoriamobile.cz

Settings - GPRS WAP

Please note all steps must be completed to ensure the settings are correctly configured.

When entering the following information do not press Save until told to in the instructions.

• Press the Menu key
• Tap Settings
• Tap Wireless & networks
• Tap Mobile networks
• Tap Access Point Names
• Press the Menu key
• Tap New APN: data.victoriamobile.cz
• Tap Name then tap the text box and enter victoria mobile then tap OK
• Tap APN then tap the text box and enter data.victoriamobile.cz then tap OK
• Tap Proxy : no then tap OK
• Tap Username then tap the text box and enter lmde then tap OK
• Tap Password then tap the text box and enter password : plus then tap OK
• Skip past Server as this is preset as Not set
• Press the Menu key
• Tap Save
• Tap your new account so a green dot appears next to it
• Press the Back key four times to return to the standby screen.
• What to do next.
• Switch your handset off and then back on to complete your settings.
• The settings are now complete.

you'll need to complete all steps for this to work.

• Tap Start
• Tap Settings
• Tap Menu
• Tap All Settings
• Tap Connections
• Tap Connections again
• Under the My ISP heading, tap Add a new modem connection
• Enter a name for the connection of victoria mobile
• Select modem type, choose victoria mobile
• Tap Next
• Enter the Access point name : data.victoriamobile.cz
• Tap Next
• Enter the Username : lmde
• Enter the password : plus
• Skip past Domain and tap Finish
• What to do next

Switch your handset off and then back on to complete your settings.
However if you are still experiencing any issues using this service.

Settings - GPRS WAP

Please note all steps must be completed to ensure the settings are correctly configured.

When entering the following information do not press Save until told to in the instructions.

• Press the Back/Home key
• Tap Settings
• Tap Wireless controls
• Tap Mobile network settings
• Tap Access Point Names
• Press the Menu key
• Tap New
• Tap Name then tap the text box and enter victoria mobile then press the Back/Home key
• Tap APN then tap the text box and enter data.victoriamobile.cz then press the Back/Home key
• Tap Username then tap the text box and enter lmde then press the Back/Home key
• Tap Password then tap the text box and enter password plus then press the Back/Home key
• Tap Authentication then tap Normal
• Tap Save
• Press the Back/Home key four times to return to the standby screen.
• What to do next

Switch your handset off and then back on to complete your settings.

The settings are now complete.

However, if you are still experiencing any issues using this service, please contact Customer Services.

• How do I connect to the Internet using GPRS/3G?
• To turn GPRS/3G on or off press HOME >MENU and then tap Settings > Wireless controls.
• Select the Mobile network check box to turn on data connection: victoria mobile
• check box to turn off data connection.
• To create a new access point press HOME >
• MENU and then tap Settings.
• Tap Wireless controls > Mobile network settings > Access Point Names. On the APNs screen,
• press MENU and then tap New APN:: data.victoriamobile.cz
• if username and password needed
• username: lmde
• password: plus

• You'll need to complete all steps for this to work.
• Tap Start
• Tap Settings
• Tap Menu
• Tap All Settings
• Tap Connections
• Tap Connections again
• Under the My ISP heading, tap Add a new modem connection
• Enter a name for the connection of victoria mobile
• Select modem type, choose victoria mobile
• Tap Next
• Enter the Access point name : data.victoriamobile.cz
• Tap Next
• Enter the Username : lmde
• Enter the password : plus
• Skip past Domain and tap Finish

• First go to Settings -> Connections -> victoria mobile (GPRS) (or create if you dont have this already)
• Connects to: Work
• Access point: data.victoriamobile.cz
• User name: lmde
• Password: plus
• Authentication type: Select the option ‘None’
• Primary DNS: (empty)
• 2nd DNS: (empty)
• IP Address:
• Then go to Settings ->Proxy ->disable
• Connects from
• Connects to: rk
• Proxy (Name:port):
• Type: Select ‘HTTP’
• User Name: lmde
• Password: plus
• Open Internet Explorer -> Tool -> Options -> Connections
• Un-check the Automatically Detect Settings option
• Select Network: victoria mobile Network
• After this, be sure to reboot your mobile

• From the Home screen, press , and then tap Settings > Wireless & networks.
• Tap Mobile networks > Network operators or Access Point Names.

Turning your data connection off can help save battery life and save money on data charges. However, if you don’t have data connection turned on and you’re also not connected to a Wi-Fi network, you won’t receive automatic updates to your email, social network accounts, and other synchronized information.

• From the Home screen, press , and then tap Settings > Wireless & networks.
• Select the Mobile network check box to turn on the data connection; clear the check box to turn off the data connection.

Adding a new access point

Before you add another data connection, have the access point name and settings (including username and password if required) from your mobile operator ready.

• From the Home screen, press , and then tap Settings > Wireless & networks.
• Tap Mobile networks > Access Point Names.
• On the APNs screen, press , and then tap New APN.
• On the Edit access point screen, enter the APN settings. Tap an APN setting item to edit it.
• Press , and then tap Save.
• APN: data.victoriamobile.cz
• User name: lmde
• Password: plus

• Name of Service: victoria mobile
• APN: data.victoriamobile.cz
• proxy: disable
• IP Address:
• Port Number:
• Homepage:www.victoriamobile.cz
• Username: lmde
• Password: plus

• Step 1: Contact your provider to receive your internet settings by sms.
• Step 2: Follow the instructions to set up your phone:
• After step 1 and 2 you have to set up which connection java applications may use. Do this by selecting "Settings" in your phone’s main menu, go to "Connectivity" by pressing right, go down to "Settings for Java", push "Select" and then select the GPRS connection you want to use.
• If step one for some reason hasn’t worked, you may also set up your phone’s configuration manually:
• Click Start > Settings > the Connections tab > the icon Connections.
• Under My ISP click Add a new modem connection.
• Enter a name for the connection, for example internet,home page: www.victoriamobile.cz
• Select victoria mobile under Select a modem.
• Press the Next-button.
• Enter the access point name under APN:data.victoriamobile.cz
• and
• Username: lmde and
• Password: plus if requested
• (click here to check your settings)
• Press the Next-button.
• Press Finish.
• Press OK.
• Press OK.
• After setting up your phone continue with step 2

• First go to Settings -> Connections -> victoria mobile (GPRS) (or create if you dont have this already)
• Connects to: Work
• Access point: data.victoriamobile.cz
• User name: lmde
• Password: plus
• Authentication type: Select the option ‘None’
• Primary DNS: (empty)
• 2nd DNS: (empty)
• IP Address:
• Then go to Settings ->Proxy -> disable
• Connects from: Work
• Connects to: WAP Network
• Proxy (Name:port): disable
• Type: Select ‘HTTP’
• User Name: lmde
• Password: plus
• Open Internet Explorer -> Tool -> Options -> Connections
• Un-check the Automatically Detect Settings option
• Select Network: WAP Network ( victoria mobile)

• Open Menu -> Browser -> Browser Settings -> Set Profile.
• Scroll to desired profile and then press Select -> Edit
• Fill your parameters as shown below.
  • Rename: victoria mobile
  • Primary ip
  • Primary port
  • Secondary ip
  • Secondary port
  • Homepage:www.victoriamobile.cz
• Select Bearer Type -> GPRS.
• Press Select and then select Edit.
• Fill your parameters as shown below.
  • Apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
  • Authentication: none
• Return to Set Profile.
• Highlight victoria mobile press Select and then select Set As Active
• To start WAP session return to Browser and select Start Browser.
• To finish WAP session press the top middle button and select Exit.

• Open Menu -> Web Sessions -> New Entry
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Homepage:www.victoriamobile.cz
  • Ip 1
  • Port 1
  • Apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
• Press Done.
• Highlight victoria mobile and then press the top middle button (Menu key).
• Select Set Default.
• To start WAP session highlight victoria mobile and then press Launch.
• To finish WAP session press NO.

• Open Menu -> Web Access -> Web Sessions -> New Entry
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Homepage:www.victoriamobile.cz
  • Service type1:
  • Ip address:
  • Port 1
  • Gprs apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
• Press Done.
• Highlight victoria mobile and then press the top middle button (Menu key).
• Select Set Default.
• To start WAP session highlight victoria mobile and then press Launch.
• To finish WAP session press and hold NO

• Open Menu -> Web Access -> Web Sessions -> New Entry
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Homepage:www.victoriamobile.cz
  • Service type1:
  • Ip address:
  • Port 1
  • Gprs apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
• Press Done.
• Highlight victoria mobile and then press the top middle button (Menu key).
• Select Set Default.
• To start WAP session highlight victoria mobile and then press Launch.
• To finish WAP session press and hold NO

• Open Menu -> Web Access -> Web Sessions -> New Entry
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Homepage:www.victoriamobile.cz
  • Service type1:
  • Ip address:
  • Port 1
  • Gprs apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
• Press Done.
• Highlight victoria mobile and then press the top middle button (Menu key).
• Select Set Default.
• To start WAP session highlight victoria mobile and then press Launch.
• To finish WAP session press and hold NO

• Open Menu -> Settings -> WAP Profile -> Set GPRS and then select GPRS When Needed
• Return to WAP Profile and open Set Profile.
• Scroll to desired profile and then press the top middle button (Menu key).
• Select Rename and type victoria mobile.
• Highlight victoria mobile and press the top middle button (Menu key), then select Edit.
• Open WAP Settings.
• Fill your parameters as shown below.
  • Service type1:
  • Ip address:
  • Port 1
  • Gprs apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
• Press Done.
• Return to Set Profile and then highlight victoria mobile.
• Press the top middle button (Menu key) and then select Set default.
• To start WAP session return to Menu and then open More -> Browser.
• To finish WAP session press NO.

• Press Start and then select Settings -> More… -> Data Connections.
• Press Menu and then select Edit Connections -> GPRS Connection.
• Press Menu and then select Add.
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Connects to :internet.
  • Apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
  • Primary dns.
  • Secondary dns.
  • Ip address
• Press Done three times.
• Highlight Internet connection.
• By pressing joystick left or right select victoria mobile.
• Press Done.
• Return to Start and then select Internet explorer.
• Press Menu and then select Options -> Connections.
• Highlight Select network.
• By pressing joystick left or right select The Internet.
• Press Done two times.
• Press Menu and then select Address bar.
• Type site address that you want to view.

• Open Menu -> Settings -> Browser Settings -> New Entry.
• Fill your parameters as shown below.
  • Name: victoria mobile
  • Homepage: www.victoriamobile.cz
  • Apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
  • Ip
  • Port1
• Press Done.
• To start WAP session highlight victoria mobile and then press Launch.
• To finish WAP session press and hold NO.
• To start WAP session again from idle mode open Menu -> Browser.

• Open Menu -> Access Internet.
• Press and hold the Menu key until the Browser Menu appears.
• Open Setup.
• Scroll to desired profile and then press Menu.
• Open WAP settings.
• Fill your parameters as shown below.
  • Ip address
  • Port 1
• Press Menu and then open Data Bearer -> GPRS.
• Fill your parameters as shown below.
  • Phone number
  • Username: lmde
  • Password: plus
  • Baud rate:
  • Line type
  • Home page: www.victoriamobile.cz
• Press Menu and then open Profile Name.
• To activate WAP session return to Access Internet.
• Press and hold Menu, then select Home.
• To finish WAP session press and hold NO.

• Main menu-web caccess
• Select web sessions
• Go to (new entry)& press select
• Name:ewz
• Homepage: http://victoriamobile.cz
• Gprs apn:econet.net
• Select ok>press done
• Go to ewz>preess menu
• Select set default.
• Main menu>web access
• Select browser
• Enter url:http://victoriamobile.cz

• Motorola K1 KRZR GPRS and WAP / Internet Settings
• You'll need to complete all steps for this to work.
• The phone has a 4-way directional 'Navi' key and 2 soft keys to either side of this. The Navi key can also be pressed in to select options.
  • Select 'Menu' (press Navi key).
  • Highlight 'Web Access' and press 'Select' (left soft key).
  • Highlight 'Web Sessions' and press 'Select' (left soft key).
  • Highlight 'New Entry' and press 'Select' (left soft key).
  • Highlight 'Name' and select (press Navi key), enter victoria mobile then press 'OK' (right soft key).
  • Highlight 'Homepage' and select (press Navi key), enter www.victoriamobile.cz then press 'OK' (right soft key).
  • Highlight 'Service Type 1' and press Navi key, highlight 'HTTP', then press 'Select' (left soft key).
• Highlight 'Timeout' and select (press Navi key), highlight '5 Minutes' and 'Select' (left soft key).
• Highlight 'Line Type 1' and select (press Navi key), highlight 'ISDN' and 'Select' (left soft key).
• Scroll to 'GPRS APN: data.victoriamobile.cz ignoring anything in between.
• Highlight victoria mobile and select (press Navi key), enter victoria mobile then press 'OK' (right soft key).
• Highlight 'User Name: lmde
• then press 'OK' (right soft key).
• Highlight 'Password: plus press 'OK' (right soft key).
• Press 'Done' (left soft key).
• Highlight : victoria mobile' press 'Options' (left soft key), highlight 'Set Default' and 'Select' (left soft key).
• Press the right soft key 3 times to get to the standby screen.
• Homepage: www.victoriamobile.cz
• The GPRS WAP settings are now complete.

• The phone has a 4-way directional 'Navi' key and 1 softkey above (menu) and 2 softkeys to either side of this. The Navi key can also be pressed in to select options.
• To insert the required symbol (e.g. : / . @) into your settings, simply press the 0 key, highlight the appropriate symbol and press the Navi key to select.
• Press Menu key (Middle Navi Key)
• Scroll to 'Web Access' and select (Right Navi Key)
• Highlight and select 'Web Sessions' (Right Soft Key)
• If victoria mobile settings exist, highlight and press the middle soft key. Highlight and select 'Edit' (Right Soft key) Go to section 6.
• Highlight and select 'New Entry' (Right Soft Key)
• Highlight and select 'Name' (Right Soft Key), enter victoria mobile press 'OK' (Right Soft Key)
• Highlight and select 'Homepage' (Right Soft Key). Enter www.victoriamobile.cz and press 'OK' (Right Soft Key)
• Highlight and select 'Service Type 1' (Right Soft Key), select 'HTTP' (Right Soft Key)
• Highlight and select 'Proxy 1': disable
• Ignore 'User Name 1: lmde
• Ignore 'Password 1: plus
• Highlight and select 'GPRS APN' (Right Soft key), enter data.victoriamobile.cz Press 'OK' (Right Soft key)
• Highlight and select 'User Name' (Right Soft Key), enter lmde Press 'OK' (Right Soft Key)
• Highlight and select 'Password', enter 'password: plus Press 'OK' (Right Soft Key)
• Select 'Done' (Left Soft Key)
• Highlight victoria mobile, press middle soft key. Select 'Set Default'
• Press Back/ Exit (Right Soft Key) 3 times to return to the standby screen.

• Go to the main menu ->Browser -> settings ->Profiles
• If you dont have a profile, then press Options -> Add New
• Enter profile name: victoria mobile
• You can configure your profile by selecting it in the profile list, pressing the Options key, then choosing Settings
• Set the bearer: GPRS by choosing the bearer, GPRS menus
• Next, go to the GPRS settings
• APN: data.victoriamobile.cz
• User ID: lmde
• Password: plus
• Go back to the profiles menu choose your profile name, press the options key and select Activate to make profile default.

Settings - GPRS WAP

• You'll need to complete all steps for these settings to work.
• The phone has four directional Navi key with a central OK key, there are also two soft keys on either side of this.
• Access Point
• Press OK
• Highlight Settings and press OK
• Highlight Access points and press OK
• Press Add (left soft key)
• Highlight Connection title and enter victoria mobile
• Highlight Authentication and press the Navi key right to select PAP
• Highlight Username and enter lmde
• Highlight Password and enter plus
• Highlight APN and enter data.victoriamobile.cz
• Press Done (right soft key)
• Press Back (right soft key)
• Press Add (left soft key)
• Highlight Title and enter victoria mobile
• Press Done (right soft key)
• Press Back (right soft key) twice
• Highlight victoria mobile Home and press OK
• Highlight Settings and press OK
• Highlight Profiles and press OK
• Press Options (left soft key)
• Highlight Add new and Select (press OK)
• Highlight Title and enter victoria mobile
• Highlight Homepage and enter www.victoriamobile.cz
• Highlight Internet profile and press the Navi key right to select victoria mobile
• Press Done (right soft key)
• Press the right soft key four times to return to the standby screen.

What to do next

Please switch your handset off and back on again before using these settings.

The settings are now complete.

• Open Menu -> Internet -> Profiles.
• Scroll to the desired profile and press Options, then select Rename.
• Type victoria mobile.
• Highlight victoria mobile and press Options, then select Settings.
• Fill your parameters as shown below.
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Connection type: temporary
• Secure settings: off
• Select GPRS settings.
• Fill your parameters as shown below.
• Ip address:
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Return to Profiles and then highlight victoria mobile.
• Press Options and then select Activate.
• To start WAP session return to Internet and then select Home.
• To finish WAP session press and hold NO.

• Open Menu -> Service -> Internet -> Profiles.
• Scroll to the desired profile and press Options, then select Add new or Rename.
• Type victoria mobile.
• Highlight victoria mobile and press Options, then select Settings.
• Fill your parameters as shown below.
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Connection type: temporary
• Secure settings: off
• Select GPRS settings.
• Ip address:
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Return to Profiles and then highlight victoria mobile.
• Press Options and then select Activate.
• To start WAP session return to Internet and then select Home.
• To finish WAP session press and hold NO.

• Open Menu -> Service -> Internet -> Profiles.
• Scroll to the desired profile and press Options, then select Add new .
• Type victoria mobile.
• Highlight victoria mobile and press Options, then select Settings.
• Fill your parameters as shown below.
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Connection type: temporary
• Secure settings: off
• Select GPRS settings.
• Ip address:
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Return to Profiles and then highlight victoria mobile.
• Press Options and then select Activate.
• To start WAP session return to Internet and then select Home.
• To finish WAP session press and hold NO.

• Open Menu -> WAP Services -> Profiles.
• Scroll to the desired profile and press Options, then select Rename.
• Type victoria mobile.
• Highlight victoria mobile and press Options, then select Settings.
• Fill your parameters as shown below.
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Connection type: temporary
• Secure settings: off
• Select GPRS settings.
• Ip address:
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Return to Profiles and then highlight victoria mobile.
• Press Options and then select Activate.
• To start WAP session return to WAP Services and then select Home.
• To finish WAP session press and hold NO.

• Tap the menu icon ::
• Scroll to Connectivity within the Settings section and then tap
• Tap Access points
• Tap Add access point
• Tap Connection title and enter victoria mobile
• Skip past Bearer as this is preset as GPRS
• Tap Authentication and then tap PAP
• Tap Username : lmde
• Tap Password : plus
• Tap APN enter data.victoriamobile.cz then tap the exit keyboard icon (bottom right hand side of the sreen)
• Tap Save
• Tap the Back arrow (top right hand of the screen) once
• Tap Internet profiles
• Tap Add profile
• Tap Title enter victoria mobile
• Slide Use proxy so the slider is green: disable
• Tap Proxy server address
• Tap Proxy server port
• Tap Access point and then tap victoria mobile
• Tap Save
• Tap the Back arrow (top right hand of the screen) twice
• Tap victoria mobile Home within the Utilities section
• Tap Settings
• Tap Profiles
• Tap Add profile
• Tap Title and enter victoria mobile
• Tap Homepage and enter www.victoriamobile.cz
• Tap Internet profile
• Tap victoria mobile
• Tap Save
• Tap the Back arrow (top right hand of the screen) three times to get back to the main menu.

• Open Menu -> Phone Option -> GPRS Setting.
• Scroll to the desired profile and press Select.
• Fill your parameters as shown below:
• Account name: victoria mobile
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Press Save.
• Return to Menu and then open Browser -> Settings.
• Scroll to the desired profile and press Edit.
• Fill your parameters as shown below.
• Server name: victoria mobile
• Ip address
• Ip port
• Home page: www.victoriamobile.cz
• Open Select Mode -> GPRS Settings and select victoria mobile.
• Press Save.
• Highlight victoria mobile and press Activate.
• To start WAP session return to Browser and select Home.
• To finish WAP session press and hold NO.

• Open Menu -> Internet -> Profiles.
• Scroll to the desired profile and press Options, then select Rename.
• Type victoria mobile.
• Highlight victoria mobile and press Options, then select Settings.
• Fill your parameters as shown below.
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Connection type: temporary
• Secure settings: off
• Select GPRS settings.
• Ip address:
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Return to Profiles and then highlight victoria mobile.
• Press Options and then select Activate.
• To start WAP session return to Internet and then select Home.
• To finish WAP session press and hold NO.

• Select Menu button (left soft key).
• Highlight 'Settings' press 'OK' (left soft key).
• Highlight 'Connectivity' press 'OK' (left soft key).
• Highlight 'Network' press 'OK' (left soft key).
• Highlight 'Network profile' press 'OK' (left soft key).
• Highlight 'Data connections' press 'OK' (left soft key).
• Press 'Options' (left soft key).
• Highlight 'New profile' press 'OK' (left soft key).
• Highlight 'Name' and enter victoria mobile.
• Highlight 'Bearer' and select 'GPRS' by pressing the Navi key to the right.
• Highlight 'APN' and enter data.victoriamobile.cz
• Highlight 'User ID' and enter lmde
• Highlight 'Password' and enter plus
• Press 'Save' (left soft key).
• Press 'Back' (right soft key) 5 times to get back to the main menu.

• Open Menu -> Settings -> GPRS settings and then select Dual
• Return to Menu and then open WAP services -> Profiles.
• Scroll to the desired profile and press Options, then select Rename.
• Type victoria mobile.
• Highlight victoria mobile and press Options, then select Settings.
• Fill your parameters as shown below.
• Homepage: www.victoriamobile.cz
• Bearer: gprs
• Connection type: temporary
• Secure settings: off
• Select GPRS settings.
• Ip address:
• Apn: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Return to Profiles and then highlight victoria mobile.
• Press Options and then select Activate.
• To start WAP session return to WAP Services and then select Home.
• To finish WAP session press and hold NO.

• Open Menu -> Internet -> Profiles.
• Scroll to the desired profile and press Options, then select Rename.
• Type victoria mobile.
• Highlight victoria mobile and press Options, then select Settings.
• Fill your parameters as shown below.
  • Homepage: www.victoriamobile.cz
  • Bearer: gprs
  • Connection type: temporary
  • Secure settings: off
  • Select GPRS settings.
  • Ip address:
  • Apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
• Return to Profiles and then highlight victoria mobile.
• Press Options and then select Activate.
• To start WAP session return to Internet and then select Home.
• To finish WAP session press and hold NO.

• Open Menu -> Internet -> Settings.
• Scroll to the desired profile and then press Rename.
• Type victoria mobile and then press Save..
• Highlight victoria mobile and press Setup
• Fill your parameters as shown below.
  • Homepage:
  • Ip address
  • Connection mode:
  • Security :
• pen Bearer.
• Highlight GPRS and then press Setup
• Fill your parameters as shown below.
  • Apn: data.victoriamobile.cz
  • Username: lmde
  • Password: plus
• Press Save.
• Return to Bearer and then select GPRS.
• Return to Settings and then select victoria mobile.
• To start WAP session select Home.
• To finish WAP session press NO.

• Homepage : www.victoriamobile.cz
• Session mode : Permanent
• Connection Security : Off
• Data Bearer : GPRS
• GPRS Access point : data.victoriamobile.cz
• IP address :
• Authentication type : Normal
• Login type :
• User name : lmde
• Password : plus

LG KP500 GPRS and WAP / Internet Settings

You'll need to complete all steps for this to work.

• Tap the menu icon (::).
• Tap 'Settings' tab.
• Tap 'Connectivity'.
• Tap 'Access points: data.victoriamobile.cz
• Tap 'Add profile'.
• Tap 'Connection title' enter victoria mobile. (Do not tap 'Save' until directed to in these settings. Use the scroll bar to high light the next step)
• Skip past 'Bearer' as this is preset to 'GPRS'.
• Tap 'Authentication' and tap 'PAP'.
• Tap 'Username' and enter: lmde
• Tap 'Password' enter : plus
• Tap 'APN' enter: data.victoriamobile.cz
• Tap 'Save'.
• Tap the 'Back' arrow (top right hand of the screen) once.
• Tap 'Internet profiles'.
• Tap 'Add profile'.
• Tap 'Title' enter victoria mobile (Do not tap 'Save' until directed to in these settings. Use the scroll bar to highlight the next step).
• Tap 'Use proxy' and tap 'Off.
• Tap 'Homepage' enter :www.victoriamobile.cz
• Tap 'Internet profile'.
• Tap victoria mobile
• Tap 'Save'.
• Tap 'Yes' to the question "Saved. Activate victoria mobile
• Tap the 'Back' arrow (top right hand of the screen) 4 times to get back to the standby screen.
• What To Do Next:
• Please switch your handset off and back on again before using these settings. The settings are now complete..

You'll need to complete all steps for this to work.

• Data connection.
• Tap 'Menu' (left softkey ::).
• Tap the 'Settings Menu' icon.
• Tap 'Phone settings'.
• Tap 'Connectivity'.
• Tap 'Access points: data.victoriamobile.cz
• Tap 'Add'.
• Tap 'Connection title' enter victoria mobile and tap 'OK'.
• Tap 'Bearer' to select 'GPRS'.
• Tap 'Authentication' and tap 'PAP' then tap 'OK'.
• Tap 'Username:lmde tap 'OK'.
• Tap 'Password: plus and tap 'OK'.
• Tap 'APN' enter: data.victoriamobile.cz and tap 'OK'.
• Tap 'Save'.
• Tap 'Back' (right softkey) 3 times to get back to the main menu.
• Tap 'Browser' (third icon down on the right).
• Tap victoria mobile Active'
• Tap 'Settings'.
• Tap 'Profiles'.
• Tap the edit icon (left softkey).
• Tap 'Add new'.
• Tap 'Service name' enter victoria mobile and tap 'OK'.
• Tap 'Homepage' enter : www.victoriamobile.cz and tap 'OK'.
• Tap 'Connection mode' tap 'TCP with proxy: no then tap 'OK'.
• The GPRS WAP settings are now complete.

• Handset model : KC910i Renoir
• Set up GPRS and WAP / Internet Settings
• Set up MMS Settings
• LG Renoir GPRS and WAP / Internet Settings
• You'll need to complete all steps for this to work.
  • Tap the menu icon (::).
  • Tap 'Settings' tab.
  • Tap 'Connectivity'.
  • Tap 'Access points: data.victoriamobile.cz
  • Tap 'Add profile'.
  • Tap 'Connection title' enter: victoria mobile
• (Do not tap 'Save' until directed to in these settings. Use the scroll bar to high light the next step)
  • Tap 'Bearer' to select 'UMTS'.
  • Tap 'Authentication' and tap 'PAP'.
  • Tap 'Username' and enter lmde
  • Tap 'Password' enter : plus
  • Tap 'APN' enter data.victoriamobile.cz
  • Tap 'Save'.
  • Tap the 'Back' arrow (top right hand of the screen) once.
• (Do not tap 'Save' until directed to in these settings. Use the scroll bar to high light the next step)
• Tap 'Homepage' enter: www.victoriamobile.cz
• Tap 'Internet profile'.
• Tap 'victoria mobile'.
• Tap 'Save
• Tap 'Yes' to the question "Saved."
• Tap the 'Back' arrow (top right hand of the screen) 4 times to get back to the standby screen.
• What To Do Next: -
• Please switch your handset off and back on again before using these settings.
• The GPRS WAP settings are now complete

Settings - GPRS WAP

Please note all steps must be completed to ensure the settings are correctly configured.

• Tap the menu icon ::
• Scroll to Connectivity and then tap
• Tap Access points
• Tap Add access point
• Tap Connection title enter victoria mobile
• Skip past Bearer as this is preset as GPRS
• Tap Authentication and then tap PAP
• Tap Username :lmde
• Tap Password :password
• Tap APN enter data.victoriamobile.cz then tap the exit keyboard icon (bottom right hand side of the sreen)
• Tap Save (top left hand side of the screen)
• Tap the Back arrow (top right hand of the screen) once
• Tap Internet profiles
• Tap Add profile
• Tap Title enter victoria mobile
• Slide Use proxy : disable
• Tap Access point and then tap victoria mobile
• Tap Save (top left hand side of the screen)
• Tap the Back arrow (top right hand of the screen)
• Tap victoria mobile Home within the Utilities section
• Tap Settings
• Tap Profiles
• Tap Add profile
• Tap Title and enter victoria mobile
• Tap Homepage and enter  www.victoriamobile.cz
• Tap Internet profile
• Tap victoria mobile
• Tap Save
• Tap the Back arrow (top right hand of the screen) three times to get back to the main menu.

• access point: data.victoriamobile.cz
• Menu> (9) Settings> (5) Access point>Edit.
• Connection Title : victoria mobile
• Bearer… …………………………..GPRS
• Username… …………………… lmde
• password: plus
• Ok and save settings.

BROSWER

• Menu> (6) Browser >(6) Settings>(1) Profile>Edit.
• Service name: victoria mobile
• Homepage: www.victoriamobile.cz
• Connection mode…………..TCP with
• Proxy : disable
• IP address:
• Proxy server point:
• Security……:
• Timeout…:
• Access point…………Should already be set as victoria mobile
• Ok and save settings.
• Making sure the ON sign is activated.
• Switch phone OFF/ON done

Settings - GPRS WAP & MMS

Please note all steps must be completed to ensure the settings are correctly configured.

When entering the following information do not press Save until told to in the instructions.

• Tap the Menu icon
• Tap Settings
• Tap Wireless controls
• Tap Mobile networks settings
• Tap Access Point Names
• Tap New APN
• Tap Name then tap the text box and enter victoria mobile then tap OK
• Tap APN then tap the text box and enter data.victoriamobile.cz then tap OK
• Tap Proxy : disable
• Tap username: lmde
• Tap Password then tap the text box and enter password then tap OK
• Press the Back key four times to return to the main menu

Settings - GPRS WAP

You'll need to complete all steps for this to work.

The phone has a 4-way directional 'Navi' key and 2 soft keys on either side. The Navi key can also be pressed in to select options.

To insert the required symbol (e.g. : / . @) into your settings, simply press the * key, highlight the appropriate symbol and press the soft key to select.

Data connection

• Select Menu button (left soft key).
• Highlight 'Settings' press 'OK' (left soft key).
• Highlight 'Connectivity' press 'OK' (left soft key).
• Highlight 'Network' press 'OK' (left soft key).
• Highlight 'Network profile' press 'OK' (left soft key).
• Highlight 'Data connections' press 'OK' (left soft key).
• Press 'Options' (left soft key).
• Highlight 'New profile' press 'OK' (left soft key).
• Highlight 'Name' and enter: victoria mobile
• Highlight 'Bearer' and select 'GPRS' by pressing the Navi key to the right.
• Highlight 'APN' and enter: data.victoriamobile.cz
• Highlight 'User ID: lmde
• Highlight 'Password: plus
• Ignore 'Primary server' and 'Secondary server'.
• Press 'Save' (left soft key).
• Press 'Back' (right soft key) 5 times to get back to the main menu.

Network profile.

• Highlight 'Browser' press 'OK' (left soft key).
• Highlight 'Settings' press 'OK' (left soft key).
• Highlight 'Network profile' press 'OK' (left soft key).
• Press Options (left soft key)
• Highlight 'New profile' press 'OK' (left soft key).
• Highlight 'Name' and enter : victoria mobile
• Highlight 'Homepage', enter www.victoriamobile.cz
• Highlight 'Proxy': disable
• Highlight 'Access point' and select victoria mobile by pressing the Navi key to the right.
• Press 'Save' (left soft key).
• Highlight victoria mobile and press 'Options', highlight 'Activate' and 'OK' (left soft key).

Settings - GPRS WAP

Please note all steps must be completed to ensure the settings are correctly configured.

• Tap the menu icon ::
• Scroll to Connectivity within the Settings section and then tap
• Tap Access points
• Tap Add access point
• Tap Connection title and enter victoria mobile
• Tap Authentication and then tap PAP
• Tap Username : lmde
• Tap Password : plus
• Tap APN enter : data.victoriamobile.cz then tap the exit keyboard icon (bottom right hand side of the sreen)
• Tap Save
• Tap the Back arrow (top right hand of the screen) once
• Tap Internet profiles
• Tap Add profile
• Tap Title enter : victoria mobile
• Slide Use proxy : disable
• Tap Access point and then tap victoria mobile
• Tap Save
• Tap the Back arrow (top right hand of the screen) twice
• Tap victoria mobile Home within the Utilities section
• Tap Settings
• Tap Profiles
• Tap Add profile
• Tap Title and enter: victoria mobile
• Tap Homepage and enter www.victoriamobile.cz
• Tap Internet profile
• Tap victoria mobile
• Tap Save
• Tap the Back arrow (top right hand of the screen) three times to get back to the main menu.

Settings - GPRS WAP

Please note all steps must be completed to ensure the settings are correctly configured.

• Tap the menu icon (::).
• Tap 'Settings' tab.
• Tap 'Connectivity'.
• Tap 'Access points'.
• Tap 'Add profile'.
• Tap 'Connection title' enter : victoria mobile. (Do not tap 'Save' until directed to in these settings. Use the scroll bar to high light the next step)
• Skip past 'Bearer' as this is preset to 'GPRS'.
• Tap 'Authentication' and tap 'PAP'.
• Tap 'Username: lmde
• Tap 'Password: plus
• Tap 'APN' enter: data.victoriamobile.cz
• Tap 'Save'.
• Tap the 'Back' arrow (top right hand of the screen) once.
• Tap 'Internet profiles'.
• Tap 'Add profile'.
• Tap 'Title' entervictoria mobile (Do not tap 'Save' until directed to in these settings. Use the scroll bar to high light the next step).
• Tap 'Use proxy' and tap 'disable.
• Tap 'Save'.
• Tap the 'Back' arrow (top right hand of the screen) twice.
• Tap the 'Utilities' tab (third tab down on the right).
• Tap 'Browser'.
• Tap 'Settings'.
• Tap 'Profiles'.
• Tap 'Add profile'.
• Tap 'Title' enter victoria mobile (Do not tap 'Save' until directed to in these settings. Use the scroll bar to high light the next step).
• Tap 'Homepage' enter : www.victoriamobile.cz
• Tap 'Internet profile'.
• Tap victoria mobile
• Tap 'Save'.
• Tap 'Yes' to the question "Saved. Activate victoria mobile".
• Tap the 'Back' arrow (top right hand of the screen) 4 times to get back to the standby screen

Settings - GPRS WAP & MMS

Please note all steps must be completed to ensure the settings are correctly configured.

When entering the following information do not press Save until told to in the instructions.

• Tap the Menu icon
• Tap Settings
• Tap Wireless controls
• Tap Mobile networks settings
• Tap Access Point Names
• Tap New APN
• Tap Name then tap the text box and enter victoria mobile then tap OK
• Tap APN then tap the text box and enter data.victoriamobile.cz then tap OK
• Tap Proxy : disable
• Tap username: lmde
• Tap Password then tap the text box and enter password then tap OK
• Press the Back key four times to return to the main menu

Settings - GPRS WAP

• You'll need to complete all steps for this to work.
• The phone has 4 directional keys (these change in direction when handset is opened) and 2 soft keys on either side of this.
• Access Point
  • Press 'Menu' (left soft key).
  • Highlight 'Connectivity' and press 'OK'.
  • Highlight 'Network' and press 'OK'.
  • Highlight 'Access points' and press 'OK'.
  • Press 'Options' (left soft key).
  • Highlight 'New access point' and press 'OK'.
  • Slide the handset open to access the keypad.
  • Highlight 'Name' and enter: victoria mobile
  • Highlight 'APN' and enter: data.victoriamobile.cz
  • Highlight 'User name': lmde
  • Highlight 'Password: plus
  • Press 'Save' (the OK key).
  • Slide the handset closed.
  • Press 'Back' (right soft key) 3 times to return to the main menu.
• Internet profile
  • Highlight victoria mobile and press 'OK'.
  • Highlight 'Settings' and press 'OK'.
  • Highlight 'Network profiles' and press 'OK'.
  • Press 'Options' (left soft key).
• Highlight 'New profile' and press 'OK'.
• Slide the handset open to access the keypad.
• Highlight 'Name' and enter : victoria mobile
• Highlight 'Homepage' and enter www.victoriamobile.cz
• Check 'Proxy' : disable
• Highlight 'Access point' and select victoria mobile (to change press the Navi buttons left or right).
• Press 'Save' (the OK key).
• Highlight victoria mobile and press 'Activate' (the OK key).
• Slide the handset closed.
• Press 'Back' (right soft key) 4 times to return to the standby screen.

• Please note all steps must be completed to ensure the settings are correctly configured.
• Tap the Menu icon ::
• Tap the Settings tab
• Tap Connectivity
• Tap Access points
• Tap Add access point
• Tap Connection title enter victoria mobile
• Do not tap Save until directed to in these settings. Use the scroll bar to hightlight the next step
• Skip past Bearer as this is preset to UMTS
• Tap Authentication and tap PAP
• Tap Username and enter lmde
• Tap Password enter plus
• Tap APN enter data.victoriamobile.cz
• Tap Save
• Tap the Back arrow (top right hand of the screen) once
• Tap Internet profiles
• Tap Add profile
• Tap Title and enter victoria mobile
• Do not tap Save until directed to in these settings. Use the scroll bar to hightlight the next step.
• Tap Use proxy and tap On
• Tap Proxy server address: disable
• Tap Proxy server port
• Tap Access point and then tap data.victoriamobile.cz
• Tap Save
• Tap the Back arrow (top right hand of the screen) twice
• Tap the Utilities tab (third tab down on the right)
• Tap Browser
• Tap Settings
• Tap Profiles
• Tap Add profile
• Tap Title enter victoria mobile
• Do not tap Save until directed to in these settings. Use the scroll bar to hightlight the next step
• Tap Homepage enter www.victoriamobile.cz
• Tap Internet profile
• Tap victoria mobile
• Tap Save
• Tap Yes to the question Saved. Activate victoria mobile
• Tap the Back arrow (top right hand of the screen) four times to get back to the standby screen.

Settings - GPRS WAP

The handset has a 4 way 'Navi' key with soft keys to the left and right.

*PLEASE NOTE* - All steps must be completed to ensure the settings are correctly configured.

• Select 'Menu' (Left Soft Key).
• Scroll to 'Browser' and press 'OK' (Left Soft Key).
• Highlight 'Settings' and press 'OK' (Left Soft Key).
• Highlight 'Profiles' and press 'OK' (Left Soft Key).
• Select 'Options' (Left Soft Key).
• Highlight 'Add new' press 'OK' (Left Soft Key). Enter victoria mobile
• Highlight victoria mobile and press 'Options' (Left Soft Key).
• Highlight 'Settings' and press 'OK' (Left Soft Key).
• Highlight 'Homepage' and press 'OK' (Left Soft Key). Enter www.victoriamobile.cz and press 'OK' (Left Soft Key).
• Highlight 'Bearer' and press 'OK' (Left Soft Key). Highlight 'GPRS' and press 'OK' (Left Soft Key).
• Highlight 'GPRS settings' and press 'OK' (Left Soft Key).
• Highlight 'APN' and press 'OK' (Left oft Key).Enter: data.victoriamobile.cz and press 'OK' (Left Soft Key).
• Highlight 'User ID': lmde
• Highlight 'Password': plus
• Press Back (Right Soft Key).
• Highlight 'Proxy Settings' : disable
• Select 'Back' (Right Soft Key) twice
• Highlight 'Activate' and press 'OK' (Left Soft Key)
• Select 'Back' (Right Soft Key) 4 times to return to the Main Menu

Settings - i-Mode

The i-Mode settings are pre-installed and cannot be amended.

You/Customers may choose to switch between victoriamobile.czpending on which type of SIM they have in their handset.

To switch settings follow the instructions below.

• Press the Menu button (under left softkey).
• Highlight 'i-mode' and 'OK' (left soft key).
• Highlight 'Profiles' and 'OK' (left soft key).
• Highlight victoriamobile.czpendant on yours/customers connection type and 'OK' (left soft key).
• Highlight 'Activate' and 'OK' (left softkey).
• Press 'Back' (right softkey) 3 times.

Settings - GPRS WAP

The phone has a 4-way directional 'Navi' key and 2 soft keys on either side. The Navi key can also be pressed in to select options.

Access Points

• Press 'Menu' (press Navi key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Access points' and select (press Navi key).
• Press 'Add' (left soft key).
• Highlight 'Connection title', enter victoria mobile.
• Highlight 'Bearer' press the Navi to the left or right to select 'UMTS'.
• Highlight 'Authentication' press the Navi to the left or right to select 'Normal'.
• Highlight 'User name', enter lmde
• Highlight 'Password', enter : plus
• Highlight 'APN', enter : data.victoriamobile.cz
• Press 'Done' (right softkey).
• Press 'Back' once (right softkey).

Internet profile

• Highlight 'Internet profiles' and select (press Navi key).
• Press 'Add' (left softkey).
• Highlight 'Title', enter : victoria mobile
• Highlight 'Use proxy' : disable).
• Press 'Done' (right softkey).
• Press 'Back' twice (right softkey).
• Highlight victoria mobile and select (press Navi key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Highlight 'Profiles' and 'Select' (press Navi key).
• Press 'Options' (left softkey).
• Highlight 'Add new' and 'Select' (press Navi key).
• Highlight 'Title', enter victoria mobile
• Highlight 'Homepage', enter www.victoriamobile.cz
• Highlight 'Internet profile' and 'List' (press Navi key).
• Highlight victoria mobile and 'Select' (press Navi key).
• Press 'Done' (right soft key).
• Highlight victoria mobile and 'Select' (press Navi key).
• Press 'Back' three times (right soft key) to return to the main menu.

• You'll need to complete all steps for this to work.

The phone has a 5-way directional touch 'Navi' pad and 2 soft keys on either side of this. The Navi key can also be pressed to select options.

• Press 'Menu' (press Navi key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Access points' and 'Select' (press Navi key).
• Press 'Add' (left softkey).
• Highlight 'Connection title' and enter victoria mobile.
• Highlight 'Bearer' and 'List' (press Navi key), highlight 'UMTS' and 'Select' (press Navi key).
• Highlight 'Authentication' and 'List' (press Navi key), highlight 'Normal' and 'Select' (press Navi key).
• Highlight 'Username' and enter lmde
• Highlight 'Password' and enter plus
• Highlight 'APN' and enter data.victoriamobile.cz
• Press 'Done' (right softkey).
• Press 'Back' (right softkey) once.
• Highlight 'Internet profiles' and 'Select' (press Navi key).
• Press 'Add' (left softkey).
• Highlight 'Title' and enter victoria mobile
• Highlight 'Use proxykey: disable
• Highlight 'Proxy server address' and enter
• Highlight 'Proxy server port' and enter
• Highlight 'Access point' and 'List' (press Navi key), highlight victoria mobile and 'Select' (press Navi key).
• Press 'Back' (right softkey) twice.
• Highlight victoria mobile and 'Select' (press Navi key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Highlight 'Profiles' and 'Select' (press Navi key).
• Press 'Options' (left softkey).
• Highlight 'Add new' and 'Select' (press Navi key).
• Highlight 'Title' and enter victoria mobile
• Highlight 'Homepage' and enter www.victoriamobile.cz
• Highlight 'Internet profile' and 'List' (press Navi key), highlight victoria mobile and 'Select' (press Navi key).
• Press 'Done' (right softkey).

Settings - GPRS WAP

Data connection

• Tap 'Menu' (left softkey ::).
• Tap the 'Settings Menu' icon.
• Tap 'Phone settings'.
• Tap 'Connectivity'.
• Tap 'Access points'.
• Tap 'Add'.
• Tap 'Connection title' enter victoria mobile and tap 'OK'.
• Tap 'Bearer' to select 'UMTS'.
• Tap 'Authentication' and tap 'PAP' then tap 'OK'.
• Tap 'Username' enter lmde and tap 'OK'.
• Tap 'Password' enter 'password: plus and tap 'OK'.
• Tap 'APN' enter data.victoriamobile.cz and tap 'OK'.
• Tap 'Save'.
• Tap 'Back' (right softkey) 3 times to get back to the main menu.

Network profile.

• Tap 'Browser' (third icon down on the right).
• Tap victoria mobile
• Tap 'Settings'.
• Tap 'Profiles'.
• Tap the edit icon (left soft key).
• Tap 'Add new'.
• Tap 'Service name' enter victoria mobile and tap 'OK'.
• Tap 'Homepage' enter www.victoriamobile.cz and tap 'OK'..
• Ignore 'Security'.
• Tap 'Access point' tap victoria mobile then tap 'OK'.
• Tap 'Save'.
• Tap victoria mobile and tap 'Activate' (middle softkey).
• Tap 'Back' (right softkey) 4 times to get back to the standby screen.

Settings - GPRS WAP

Data connection

• Tap 'Menu' (left softkey ::).
• Tap the 'Settings Menu' icon.
• Tap 'Phone settings'.
• Tap 'Connectivity'.
• Tap 'Access points'.
• Tap 'Add'.
• Tap 'Connection title' enter victoria mobile and tap 'OK'.
• Tap 'Bearer' to select 'UMTS'.
• Tap 'Authentication' and tap 'PAP' then tap 'OK'.
• Tap 'Username' enter lmde and tap 'OK'.
• Tap 'Password' enter 'password: plus and tap 'OK'.
• Tap 'APN' enter data.victoriamobile.cz and tap 'OK'.
• Tap 'Save'.
• Tap 'Back' (right softkey) 3 times to get back to the main menu.

Network profile.

• Tap 'Browser' (third icon down on the right).
• Tap victoria mobile
• Tap 'Settings'.
• Tap 'Profiles'.
• Tap the edit icon (left soft key).
• Tap 'Add new'.
• Tap 'Service name' enter victoria mobile and tap 'OK'.
• Tap 'Homepage' enter www.victoriamobile.cz and tap 'OK'..
• Ignore 'Security'.
• Tap 'Access point' tap victoria mobile then tap 'OK'.
• Tap 'Save'.
• Tap victoria mobile and tap 'Activate' (middle softkey).
• Tap 'Back' (right softkey) 4 times to get back to the standby screen.

Settings - GPRS WAP

Please note all steps must be completed to ensure the settings are correctly configured.

• Tap the menu icon ::
• Scroll to Connectivity and then tap
• Tap Access points
• Tap New access point
• Tap Connection title enter victoria mobile
• Tap Bearer and then tap UMTS
• Tap Authentication and then tap PAP
• Tap Username and enter lmde
• Tap Password enter password
• Tap APN enter data.victoriamobile.cz then tap the exit keyboard icon (bottom right hand side of the sreen)
• Tap Save (top left hand side of the screen)
• Tap the Back arrow (top right hand of the screen) once
• Tap Internet profiles
• Tap New profile
• Tap Title enter victoria mobile
• Tap Access point and then tap victoria mobile
• Tap Save (top left hand side of the screen)
• Tap the Back arrow (top right hand of the screen)
• Scroll to Browser settings and then tap
• Tap Profiles
• Tap New profile
• Tap Title and enter victoria mobile
• Tap Homepage and enter  www.victoriamobile.cz
• Tap Internet profile
• Tap Save (top left hand side of the screen)
• Tap the Back arrow (top right hand of the screen) three times to get back to the main menu.

• Go to Menu > Settings > Connectivity > Datacommunication > Dataaccount > New account
• Select Add
• Set account type to GPRS
• Click Select
• Account Name: victoria mobile
• Click Continue
• Enter the access point name under APN: data.victoriamobile.cz
• Username: lmde and Password: plus
• Save
• Back * 3
• Select Internet settings > Internet profiles
• New profile > Add
• Connect with > choose the above created account
• Save
• Back * 3
• Select Settings for Java
• Choose account you have just created.

• From the Standby screen press Menu then on the General tab
• Scroll down to Setup Wizard and press Select
• Choose Settings Download and press Continue
• The settings will download automatically

• From Main menu Settings
• Scroll right four times in the tab to reach the connectivity section
• Scroll down and select Data Comm.
• Scroll down and select preferred service
• Select GPRS and GSM and press Back to reach connectivity menu
• Scroll down and select Internet settings ⇒ Internet profiles ⇒ New profile
• Press Add and enter the name of the Internet profile: For Ex: Name: Internet and press ok
• Select New account GPRS data
• Now enter name – Name: victoria mobile and press continue
• Enter APN: data.victoriamobile.cz
• Scroll down and select UserName: lmde
• Scroll down and select Password: plus
• Press Save

• Go to Menu > Settings > Connectivity > Datacommunication > Dataaccount > New account
• Select Add
• Set account type to PS-data
• Click Select
• Enter a name for the account: victoria mobile
• Click Continue
• Enter the access point name under APN: data.victoriamobile.cz
• Username: lmde and Password: plus
• Save
• Back * 3
• Select Internet settings > Internet profiles
• New profile > Add
• Connect with > choose the above created account
• Save
• Back * 3
• Select Settings for Java
• Choose account you have just created.

• Select Menu
• Highlight Settings and Select
• Push the Navi key 4 times to the right until it shows Connectivity along the top of the screen, highlight Internet settings and Select
• Highlight Connect using: and Select
• Press Options (left softkey), highlight Create New and Select
• Highlight PS data and Select
• Highlight Name and Edit , enter victoria mobile and then OK
• Highlight APN and Edit , enter data.victoriamobile.cz and then OK
• Press Save
• Highlight victoria mobile and press Options (left softkey)
• Highlight Edit and then Select
• Ignore APN as already entered
• Highlight Username and then Edit , enter lmde and Save
• Highlight Password and then Edit , enter plus and Save
• Check Login request is preset at Off
• Check IP address is preset blank
• Check DNS address is preset blank
• Highlight Authentication and then Edit , check that only PAP is marked (remove mark by pressing the Navi key to Unmrk, ), then Save
• Check Data compression is preset at Off
• Check Header compr. is preset at Off
• Highlight Proxy settings and then Edit
• Highlight Proxy and then Edit , highlight On and Select
• Check Same for all servers is preset at Off
• Highlight Proxy servers and then Edit
• Highlight HTTP and then Select
• Highlight Username and then Edit , enter lmde and Save
• Highlight Password and then Edit , enter plus and Save
• Highlight Proxy address and then Edit , enter Proxy IP Number and Save
• Highlight Port and then Edit, enter Port Number and Save
• Tap Back 4 times
• Highlight victoria mobile and then Select , then press Save (left softkey)

• Press Menu
• Highlight Settings and Select
• Highlight Connectivity and Select
• Highlight Internet settings and Select
• Highlight Connect using: and Select
• Press Options, highlight Create New and Select
• Highlight PS data and Select
• Highlight Name and Edit, enter victoria mobile and then OK
• Highlight APN and Edit, enter data.victoriamobile.cz and then OK
• Press Save
• Highlight victoria mobile and press Options
• Highlight Edit and then Select
• Skip past APN as youve already entered this
• Highlight Username and then Edit, enter lmde and Save
• Highlight Password and then Edit, enter plus and Save
• Check that Login request is set at Off
• Check that IP address is set at blank
• Check that DNS address is set at blank
• Highlight Authentication and then Edit, check that only PAP is marked (remove the tick by highlight the option and then press the Navi key to Unmark), then Save
• Check that Data compression is set at Off
• Check that Header compr. is set at Off
• Highlight Proxy settings and then Edit
• Highlight Proxy and then Edit, highlight On and Select
• Check that Same for all servers is set at Off
• Highlight Proxy servers and then Edit
• Highlight HTTP and then Select
• Highlight Username and then Edit, enter lmde and Save
• Highlight Password and then Edit, enter plus and Save
• Highlight Proxy address and then Edit, enter proxy IP and Save
• Highlight Port and then Edit, enter Port No and Save
• Tap Back four times
• Highlight victoria mobile and then Select, then press Save

• Scroll to Settings and Select
• Push the navi key 4 times to the right until it shows Connectivity along the top of the screen, then highlight Data comm. and press Select
• Highlight Data accounts and press Select
• Highlight New account and press Select
• On the Account type screen, highlight GPRS data and press Select
• On the name New Account screen enter victoria mobile, press OK
• On the New GPRS Data screen, highlight APN and press Edit. Enter data.victoriamobile.cz and press OK
• Highlight Username and press Edit. Enter lmde and press OK.
• Highlight Password and press Edit Enter plus and press OK
• Press Save
• Press the back arrow key (key directly below left softkey) 2 times

• Open Menu -> Settings -> Connectivity -> Internet Settings -> Internet profiles -> New profile.
• Press Add.
• Open Name and type victoria mobile.
• Open Connect using -> New Account -> GPRS data.
• Fill your parameters as shown below.
• Name : victoria mobile
• A PN: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Press Save.
• Highlight victoria mobile and press Select and press Save.
• Highlight victoria mobile and press More, then open Settings.
• Fill your parameters as shown below.
• Connect using: victoria mobile
• Proxy: disable.
• Press Save.
• Highlight victoria mobile and press More, then open Advanced -> Change homepage.
• Select Name and type victoria mobile, press OK.
• Select Address and type http://www.victoriamobile.cz, press OK.
• Press Save.
• Return to Internet profiles.
• Highlight victoria mobile and press Select.
• To start WAP session return to Menu and open Internet services.
• Press to and select victoria mobile.
• To finish WAP session press More -> Exit WAP.
• Finish.

Create new accounts from idle mode:

• Open the flip on the phone to allow access to the full menu.
• Open Control Panel and then open Connections tab.
• Open Internet accounts.
• In the Accounts tab select New.
• Fill parameters as shown below.
• Account name: victoria mobile.
• Connection type: gprs.
• Select Advanced and then open Server tab.
• In the Address field type wap.
• Open other tab and then select Normal in Authentication field.
• Select done two times.
• In the Preferred field select victoria mobile.
• Open other tab and in the preferred mode field select Automatic.
• Select Done.
• Open WAP accounts.
• In the Basic tab select New.
• Proxy: disable.
• Select Done.
• Open Preferred tab.
• Check Use WAP account.
• In the Preferred field select victoria mobile.
• Select Done.

Start the browser from idle mode:

• Open the flip on the phone to allow access to the full menu.
• Open Internet.
• Open Edit -> Preferences.
• Fill parameters as shown below.
• Home page: www.victoriamobile.cz.
• Account: victoria mobile.
• Select Done.
• To start WAP session select .
• To exit WAP session select and choose Disconnect..

• The handset has a central navigation button (Navi key) and 2 soft keys to either side of it.
  • Press 'Menu' (left soft key).
  • Highlight 'Settings' and 'Select' (left soft key).
  • Highlight 'Internet settings' and 'Select' (left soft key).
  • Highlight 'Internet profile' and 'Select' (left soft key)
  • Highlight a profile and 'Select' (left soft key).
  • Highlight 'Edit' and 'Select' (left soft key).
  • Highlight 'Homepage' and 'Select' (left soft key), enter www.victoriamobile.cz then press 'Options' highlight 'OK' and 'Select' (left soft key).
  • Highlight 'Username' and 'Select' (left soft key), enter lmde then press 'Options' highlight 'OK' and 'Select' (left soft key).
  • Highlight 'Password' and 'Select' (left soft key), enter plus then press 'Options' highlight 'OK' and 'Select' (left soft key).
• proxy: off
• Press 'Back' (right soft key).
• Highlight 'Activate' and 'Select' (left soft key).
• Press 'Back' 3 times to return to the main main (right soft key).

• Create GPRS account (Please note if a field is not mentioned it does not need altering):
  • Open the flip cover and tap on the '::' icon in the top right hand corner.
  • Tap on 'Control panel'.
  • Tap on the 'Connections' tab.
  • Tap on 'Internet accounts'
  • Tap 'New' and enter 'victoria mobile in the field next to 'Account name:'.
  • Tap on the drop down box next to 'Connection type:' and then tap victoria mobile.
  • Tap on 'Advanced'.
  • Tap on the white box next to 'User name and password required:', this will place a tick in the box.
  • Tap on the field next to 'User name:' and enter lmde
  • Tap on the field next to 'Password:' and enter plus
  • Tap on the field next to 'Address:' and enter data.victoriamobile.cz
• Tap on 'Done'.
• Tap on 'Done'.
• Tap on 'Done'.
• Set homepage (Please note if a field is not mentioned it does not need altering):
• Tap on the internet icon (this is a picture of a globe with a magnifying glass in front at the top of the screen)
• Tap on 'Edit'
• Tap on 'preferences' and enter www.victoriamobile.cz in the field next to 'homepage'.
• Tap on the drop down box next to 'WAP account:' and then tap victoria mobile
• Tap on 'Done'.

• Go to Settings
• Go to Connectivity tab
• Go to Internet Settings
• Go to Option then Create New
  • Select PS Data
  • Name: victoria mobile Connect
  • APN: data.victoriamobile.cz Press save
• Select victoria mobile Connect then press Options then Edit
  • Go to Proxy Settings then Edit
  • Proxy: Off
  • home page: www.victoriamobile.cz

• Please note all steps must be completed to ensure the settings are correctly configured.
• The phone has four directional Navi key with a central Select key, there are also two soft keys on either side of this.
• Select the Menu (Navi key)
• Highlight Settings and Select (press Navi key)
• Highlight Connectivity and Select (press Navi key)
• Highlight Internet settings and Select (press Navi key)
• Highlight Connect using: and Select (press Navi key)
• Press Options (left soft key), highlight Create New and Select (press Navi key)
• Highlight PS data and Select (press Navi key)
• Highlight Name and Edit (press Navi key): victoria mobile and then OK (press Navi key)
• Highlight APN and Edit (press Navi key): data.victoriamobile.cz and then OK (press Navi key)
• Press Save (left soft key)
• Highlight victoria mobile and press Options (left soft key)
• Highlight Edit and then Select (press Navi key)
• Skip past APN as you've already entered this
• Highlight Username : lmde
• Highlight Password plus
• Homepage : www.victoriamobile.cz
• Check that Login request is set at Off
• Highlight Authentication and then Edit (press Navi key), check that only PAP is marked (remove the tick by highlight the option and then press the Navi key to Unmark), then Save (left soft key)
• Check that Data compression is set at Off
• Check that Header compr. is set at Off
• Tap Back (right soft key) four times
• Highlight victoria mobile and then Select (press Navi key), then press Save (left soft key).

• The K810i has a central navigation button (Navi key) and 2 soft keys to either side of it.
  • Press 'Menu' (left soft key).
  • Highlight 'Settings' and 'Select' (left soft key).
  • Push the Navi key 4 times to the right until it shows 'Connectivity' along the top of the screen, highlight 'Data communictions' and 'Select' (left soft key).
  • Highlight 'Data accounts' press 'Select' (left soft key).
  • Highlight 'New account' press 'Select' (left soft key).
  • On the 'Account type' screen, highlight 'PS data' and 'Select' (left soft key).
  • On the 'Name' screen enter : victoria mobile , press 'Continue' (left soft key).
  • On the 'New PS data' screen, highlight 'APN' and 'Edit' (left soft key), enter: data.victoriamobile.cz press 'OK' (left soft key).
  • Highlight 'Username: lmde 'OK' (left soft key).
  • Highlight 'Password: plus'OK' (left soft key).
  • Press 'Save' (right soft key).
  • Press the 'back' arrow key (key directly below left soft key) 2 times.
• Activate GPRS settings:
  • Highlight 'Internet settings' and 'Select' (left soft key).
  • Highlight 'Internet profiles' and 'Select' (left soft key).
  • Highlight 'New profile' and 'Add' (left soft key), highlight 'Name:' and 'Add' (left soft key), enter : victoria mobile and 'OK' (left soft key).
  • Highlight 'Connect using' and 'Select' (left soft key), highlight : victoria mobile and 'Select' (left soft key).
  • Press 'Save' (right soft key).
• Change GPRS settings:
  • Highlight victoria mobile and press 'More' (right soft key).
  • Highlight 'Settings' and 'Select' (left soft key).
  • Highlight 'Use proxy:' and 'Select' (left soft key), highlight: disable and 'Select' (left soft key).
• Change Homepage:
  • Highlight victoria mobile and press 'More' (right soft key).
  • Highlight 'Advanced' and 'Select' (left soft key).
  • Highlight 'Change homepage' and 'Select' (left soft key).
  • Highlight 'Name:' and 'Edit' (left soft key). Hold the 'c' button (to the right of the Navi key) down to clear any text in the field. Enter: victoria mobile and 'OK' (left soft key).
  • Highlight 'Address:' and 'Edit' (left soft key). Hold the 'c' button (to the right of the Navi key) down to clear any text in the field. Enter www.victoriamobile.cz and 'OK' (left soft key).
  • Press 'Save' (right soft key).
  • Press the backward arrow key (key directly below left hand soft key).
  • Highlight victoria mobile and 'Select' (left soft key).
  • Press the 'back' button (to left of Navi key) 3 times to return to the standby screen.

• Setting up a new account.
• Tap Menu
• Tap Control panel
• Tap Connections
• Tap Internet accounts
• Tap More
• Tap New account
• Tap Data
• Tap Account name and enter victoria mobile then tap Done
• Tap Address and enter data.victoriamobile.cz then tap Done
• Tap the box next to the Username and password required to insert a tick
• Tap Username :lmde then tap Done
• Tap Password : plus and tap Done
• Tap More
• Tap Proxy: no or disable
• Tap No to the question about setting the account to a group Setting up a new group.
• On the Internet accounts screen tap More then tap New account
• Tap Group account
• Name the group victoria mobile and tap Next
• Tap Add new account
• Tap the victoria mobile box to place a tick then tap Done
• Tap the box next to victoria mobile to insert a tick
• Tap Save then tap the Groups tab
• On the Internet accounts screen tap More
• Tap Preferred group
• Tap on the Preferred box, hightlight victoria mobile and tap Select, then tap Save
• Tap Done
• Tap the Back arrow three times to return to the menu screen.

• Settings Name: victoria mobile
• Home Page: www.victoriamobile.cz
• Session Mode: Permanent
• Connection Security: off
• Data Bearer: GPRS
• GPRS Access Point: data.victoriamobile.cz
• i.p Address: none
• Use proxy? disable
• Authentication Type: Normal
• Login type: Automatic
• User Name: lmde
• Password: plus

• You'll need to complete all steps for this to work.
• Select 'Menu' (press Navi key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Push the Navi key 4 times to the right until it shows 'Connectivity' along the top of the screen, highlight 'Internet settings' and 'Select' (press Navi key).
• Highlight 'Connect using:' and 'Select' (press Navi key).
• Press 'Options' (left soft key), highlight 'Create New' and 'Select' (press Navi key).
• Highlight 'PS data' and 'Select' (press Navi key).
• Highlight 'Name' and 'Edit' (press Navi key), enter 'victoria mobileWAP' and then 'OK' (press Navi key).
• Highlight 'APN: data.victoriamobile.cz and 'Edit' (press Navi key), enter victoriamobile.cz' and then 'OK' (press Navi key).
• Press 'Save' (left softkey).
• Highlight victoria mobile and press 'Options' (left softkey).
• Highlight 'Edit' and then 'Select' (press Navi key).
• Ignore 'APN' as already entered.
• Highlight 'Username: lmde and then 'Edit' (press Navi key), enter victoria mobile and 'Save' (press Navi key).
• Highlight 'Password': plus and then 'Edit' (press Navi key), enter 'password' and 'Save' (press Navi key).
• Check 'Login request' is preset at 'Off'.
• Check 'IP address' is preset blank.
• Check DNS address' is preset blank.
• Highlight 'Authentication' and then 'Edit' (press Navi key), check that only 'PAP' is marked (remove mark by pressing the Navi key to 'Unmrk', ), then 'Save' (left soft key).
• Check 'Data compression' is preset at 'Off'.
• Check 'Header compr.' is preset at 'Off'.
• Highlight victoria mobile and then 'Select' (press Navi key), then press 'Save' (left softkey).
• Switch your handset off and then back on to complete your settings.

• Access Point: data.victoriamobile.cz
• Server:
• Server Port:
• Use Proxy: no
• Proxy Address:
• Homepage Location: www.victoriamobile.cz
• Primary Name Server:
• Secondary Name Server:
• Username: lmde
• Password: plus

• Sony Ericsson W980 GPRS and WAP / Internet Settings
• You'll need to complete all steps for this to work.
• The handset has a central navigation button (Navi key) and 2 soft keys to either side of it.
• Select 'Menu' (press Navi key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Push the Navi key 4 times to the right until it shows 'Connectivity' along the top of the screen, highlight 'Internet settings' and 'Select' (press Navi key).
• Highlight 'Connect using:' and 'Select' (press Navi key).
• Press 'Options' (left softkey), highlight 'Create New' and 'Select' (press Navi key).
• Highlight 'PS data' and 'Select' (press Navi key).
• Highlight 'Name' and 'Edit' (press Navi key), enter victoria mobile and then 'OK' (press Navi key).
• Highlight 'APN:data.victoriamobile.cz (press Navi key), enter and then 'OK' (press Navi key).
• Press 'Save' (left softkey).
• Highlight victoria mobile and press 'Options' (left softkey).
• Highlight 'Edit' and then 'Select' (press Navi key).
• Ignore 'APN' as already entered.
• Highlight 'Username: lmde and 'Password: plus and then 'Edit' (press Navi key)and 'Save' (press Navi key).
• Check 'Login request' is preset at 'Off'.
• Check 'IP address' is preset blank.
• Check DNS address' is preset blank.
• Highlight 'Authentication' and then 'Edit' (press Navi key), check that only 'PAP' is marked (remove mark by pressing the Navi key to 'Unmrk', ), then 'Save' (left soft key).
• Check 'Data compression' is preset at 'Off'.
• Check 'Header compr.' is preset at 'Off'.
• Check 'Proxy settings' is preset at 'Off'..
• Highlight 'victoria mobileand then 'Select' (press Navi key), then press 'Save' (left softkey).
• The GPRS WAP Settings are now complete.

• Open Menu -> Connectivity -> Internet Settings -> Internet profiles -> New profile.
• Press Add.
• Open Name and type victoria mobile.
• Open Connect using -> Add New Account -> Account type and select GPRS data.
• Fill your parameters as shown below:
  • Name: victoria mobile
  • APN: data.victoriamobile.cz
  • User id: lmde
  • Password: plus
• Press Save.
• Highlight victoria mobile and press More, then open Settings.
• Fill your parameters as shown below:
  • Internet mode:
  • IP address:
• Press Save.
• Highlight victoria mobile and press More, then open Advanced -> Change homepage.
• Type victoria mobile, press OK.
• Type http://www.victoriamobile.cz, press OK
• To start WAP session return to Menu and open Internet services.
• Press More and select victoria mobile.
• To finish WAP session press More -> Exit WAP.

• Access Point:data.victoriamobile.cz
• Server:
• Server Port:
• Use Proxy: no
• Proxy Address: disable
• Homepage Location: www.victoriamobile.cz
• Username: lmde
• Password: plus

Settings - GPRS WAP & MMS

• Please note all steps must be completed to ensure the settings are correctly configured.
• The phone has three key on the front these are from left to right, Menu (four small boxes), Home (one large box), Back (arrow pointing left).
• When entering the following information do not press Save until told to in the instructions.
• Press the Home key
• Tap Settings
• Tap Wireless controls
• Tap Mobile networks
• Tap Access Point Names
• Press the Menu key
• Tap New APN: data.victoriamobile.cz
• Tap Name then tap the text box and enter victoria mobile , tap Done then tap OK
• Tap APN then tap the text box and enter data.victoriamobile.cz tap Done, then tap OK
• Tap Username then tap the text box and enter lmde tap Done then tap OK
• Tap Password then tap the text box and enter password plus tap Done then tap OK
• Tap MMSC then tap the text box and enter www.victoriamobile.cz tap Done then tap OK
• Press the Menu and then tap Save
• Tap the tick next to your new APN to make it active
• Press the Back key five times to return to the standby screen.
• What to do next
• Switch your handset off and then back on to complete your settings.
• The settings are now complete.
• However, if you are still experiencing any issues using this service.

• Step 1: Click here to receive the correct settings from SonyEricsson by sms
• Step 2: Follow the instructions to set up your phone:
• After step 1 and 2 you have to set up which connection java applications may use. Do this by selecting "Settings" in your phone's main menu, go to "Connectivity" by pressing right, go down to "Settings for Java", push "Select" and then select the GPRS connection you want to use.
• home page: www.victoriamobile.cz
• If step one for some reason hasn't worked, you may also set up your phone's configuration manually:
  • Go to Menu > Settings > Connectivity > Data communication > Data account > New account
  • Select Add
  • Set account type to PS-data
  • Click Select
  • Enter a name for the account, for example your operator: victoria mobile
  • Click Continue
  • Enter the access point name under APN: data.victoriamobile.cz and Username: lmde and Password: plus
  • Save
  • Back * 3
  • Select Internet settings > Internet profiles
  • New profile > Add
  • Connect with > choose the above created account
  • Save
  • Back * 3
  • Select Settings for Java
  • Choose account you have just created.
• After setting up your phone continue with step 2

• Use your Sony Ericsson W880i to access web pages using the built-in browser or send and receive email and MMS messages using 3G connectivity
• getting up an Internet profile
• Many phones bought on contract will come with Internet settings already set up but if not, it is very easy to set it up and get online. To do so you will need get the following information from your network provider:
• APN address – data.victoriamobile.cz
• Username – lmde
• Password – plus
• Proxy address – no
• Port number – no
• Once you have this information, that's all you need to set up your internet access. Here's how to do it:
• Press the middle button to enter the main menu. Highlight the Settings icon then press Select (Figure 1).
• Scroll right four times through the tabbed menus until you reach the Connectivity section. Scroll down until you reach Data communication and press Select.
• Here we'll make sure your phone is set to use GPRS correctly for better internet access. Scroll down to Preferred service and press Select
• Now press Back to take you to the Connectivity menu and scroll down once to highlight Internet settings and press Select (Figure 2).
• Highlight Internet profiles and press Select (Figure 3), then scroll up to highlight New profile and press Add (Figure 4). Now you're ready to enter the information you found out earlier.
  • Highlight Use proxy: no
  • Homepage: www.victoriamobile.cz

• The GPRS WAP settings are now complete. Sony Ericsson K770i GPRS WAP settings
• You'll need to complete all steps for this to work.
• The handset has a central navigation button (Navi key) and 2 soft keys to either side of it.
  • Select 'Menu' (left soft key).
  • Highlight 'Settings' and 'Select' (press Navi key).
  • Push the Navi key 4 times to the right until it shows 'Connectivity' along the top of the screen, highlight 'Internet settings' and 'Select' (press Navi key).
  • Highlight 'Internet profiles' and 'Select' (press Navi key).
  • Highlight 'New profile' and 'Add' (press Navi key).
  • Highlight 'Name:' and 'Add' (press Navi key), enter victoria mobile and then 'OK' (left soft key).
  • Highlight 'Connect using:' and 'Select' (press Navi key).
  • Highlight 'New account' and 'Add' (press Navi key).
  • Highlight 'PS data' and 'Select' (press Navi key).
  • Highlight 'Name' and 'Edit' (press Navi key), enter victoria mobile and then 'Continue' (left soft key).
  • Highlight 'APN' and 'Edit' (press Navi key), enter data.victoriamobile.cz and then 'OK' (press Navi key).
  • Highlight 'Username' and then 'Edit' (press Navi key), enter lmde and 'OK' (left soft key).
  • Highlight 'Password' and then 'Edit' (press Navi key), enter plus and 'OK' (left soft key).
  • Press 'Save' (right soft key).
  • Highlight victoria mobile and 'Select' (left soft key).
  • Press 'Save' (right soft key).
  • Highlight victoria mobile and press 'More' (right soft key).
  • Highlight 'Settings' and 'Select' (left soft key).
  • Ignore 'Connect using' as we have just entered that detail.
  • Highlight 'Use proxy:' and 'Select' (left soft key), highlight no and 'Select' (left soft key).
• Highlight 'Change homepage' and 'Select' (left soft key).
• Highlight 'Name:' and 'Edit' (left soft key), victoria mobile and then 'OK' (left soft key).
• Highlight 'Address' and 'Edit' (left soft key), enter www.victoriamobile.cz and then 'OK' (left soft key).
• Press 'Save' (right soft key).
• Press the 'Back arrow' key.
• Highlight victoria mobile and press 'Select' (left soft key, this will make this account your active profile).
• Press the 'Back arrow' key three times to return to the standby screen.

Please note all steps must be completed to ensure the settings are correctly configured.

The handset has a central navigation button (Navi key) and 2 soft keys to either side of it.

• Select 'Menu' (press Navi key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Push the Navi key 4 times to the right until it shows 'Connectivity' along the top of the screen, highlight 'Internet settings' and 'Select' (press Navi key).
• Highlight 'Connect using:' and 'Select' (press Navi key).
• Press 'Options' (left soft key), highlight 'Create New' and 'Select' (press Navi key).
• Highlight 'Name' and 'Edit' (press Navi key), enter lmde and then 'OK' (press Navi key).
• Highlight 'APN' and 'Edit' (press Navi key), enter data.victoriamobile.cz and then 'OK' (press Navi key).
• Press 'Save' (left soft key).
• Highlight victoria mobile and press 'Options' (left soft key).
• Highlight 'Edit' and then 'Select' (press Navi key).
• Ignore 'APN'as already entered.
• Highlight 'Username' and then 'Edit' (press Navi key), enter lmde and 'Save' (press Navi key).
• Highlight 'Password' and then 'Edit' (press Navi key), enter plus and 'Save' (press Navi key).
• Highlight 'Authentication' and then 'Edit' (press Navi key), check that only 'PAP' is marked (remove mark by pressing the Navi key to 'Unmrk', ),then 'Save' (left soft key).
• Check 'Data compression' is preset at 'Off'.
• Highlight 'Username' and then 'Edit' (press Navi key), enter lmde and 'Save' (press Navi key).
• Highlight 'Password' and then 'Edit' (press Navi key), enter plus and 'Save' (press Navi key).
• Highlight 'Proxy address' and then 'Edit' (press Navi key)
• Tap 'Back' 4 times.
• Highlight victoria mobile and then 'Select' (press Navi key), then press 'Save' (left soft key).

Settings - GPRS WAP

Please note all steps must be completed to ensure the settings are correctly configured.

• Press the Menu key (white key)
• Tap Settings
• Tap Connectivity
• Tap Destinations
• Tap Access point
• Tap No to the question, Automatically check for available access points?
• Tap Packet data
• Tap the text box to enter victoria mobile when entered tap the green tick, then tap OK
• Tap WAP services
• On the Network destinations screen, tap WAP services
• Tap victoria mobile twice
• Skip past Connection name and Data bearer as you've already filled these in
• Tap Access point name and tap the text box to enter: data.victoriamobile.cz when entered tap the green tick, then tap OK
• Tap Username and tap the text box to enter : lmde when entered tap the green tick, then tap OK
• Skip past Prompt password : plus
• Tap Password and tap the text box to enter password: plus when entered tap the green tick, then tap OK
• Tap Authentication until it shows Normal
• Tap Homepage and tap the text box to enter www.victoriamobile.cz when entered tap the green tick, then tap OK
• Tap Use access point until it shows After confirmation
• Tap Options and then tap Advanced settings
• Skip past Network type as this is preset to IPv4
• Skip past Phone IP address and DNS address as these are preset to Automatic
• Tap Proxy server address : disable
• Tap Proxy port number
• Tap Back twice
• Tap Options
• Tap Organise and then tap Change priority
• Tap the position you require (this would usally be number 1) and then tap OK
• Tap Back five times, to return to the standby screen.

The handset has a central navigation button (Navi key) and 2 soft keys to either side of it.

• Select 'Menu' (press Navi key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Push the Navi key 4 times to the right until it shows 'Connectivity' along the top of the screen, highlight 'Internet settings' and 'Select' (press Navi key).
• Highlight 'Connect using:' and 'Select' (press Navi key).
• Press 'Options' (left softkey), highlight 'Create New' and 'Select' (press Navi key).
• Highlight 'PS data' and 'Select' (press Navi key).
• Highlight 'Name' and 'Edit' (press Navi key), enter : victoria mobile and then 'OK' (press Navi key).
• Highlight 'APN' and 'Edit' (press Navi key), enter : data.victoriamobile.cz and then 'OK' (press Navi key).
• Press 'Save' (left softkey).
• Highlight : victoria mobile and press 'Options' (left softkey).
• Highlight 'Edit' and then 'Select' (press Navi key).
• Ignore 'APN' as already entered.
• Highlight 'Username' and then 'Edit' (press Navi key), enter : lmde and 'Save' (press Navi key).
• Highlight 'Password' and then 'Edit' (press Navi key), enter: plus and 'Save' (press Navi key).
• Check 'Login request' is preset at 'Off'.
• Check 'IP address' is preset blank.
• Check DNS address' is preset blank.
• Highlight 'Authentication' and then 'Edit' (press Navi key), check that only 'PAP' is marked (remove mark by pressing the Navi key to 'Unmrk', ), then 'Save' (left soft key).
• Check 'Data compression' is preset at 'Off'.
• Check 'Header compr.' is preset at 'Off'.
• Highlight 'Proxy settings' and then 'Edit' (press Navi key).: disable
• Highlight victoria mobile and then 'Select' (press Navi key), then press 'Save' (left softkey).

• Please note all steps must be completed to ensure the settings are correctly confi.
• The phone has four directional Navi key with a central Select key, there are also two soft keys on either side of this.
• Select the Menu (Navi key)
• Highlight Settings and Select (press Navi key)
• Highlight Connectivity and Select (press Navi key)
• Highlight Internet settings and Select (press Navi key)
• Highlight Connect using: and Select (press Navi key)
• Press Options (left soft key), highlight Create New and Select (press Navi key)
• Highlight PS data and Select (press Navi key)
• Highlight Name and Edit (press Navi key), enter victoria mobile and then OK (press Navi key)
• Highlight APN and Edit (press Navi key), enter data.victoriamobile.cz and then OK (press Navi key)
• Press Save (left soft key)
• Highlight victoria mobile and press Options (left soft key)
• Highlight Edit and then Select (press Navi key)
• Skip past APN as you've already entered this
• Highlight Username : lmde and Save (press Navi key)
• Highlight Password : plus and Save (press Navi key)
• Check that Login request is set at Off
• Highlight Authentication and then Edit (press Navi key), check that only PAP is marked (remove the tick by highlight the option and then press the Navi key to Unmark), then Save (left soft key)
• Check that Data compression is set at Off
• Check that Header compr. is set at Off
• Highlight Proxy settings and then Edit (press Navi key)
• Highlight Proxy and then Edit (press Navi key), highlight Off and Select (press Navi key)
• Tap Back (right soft key) four times
• Highlight victoria mobile and then Select (press Navi key), then press Save (left soft key).
• www.victoriamobile.cz

Setting Internet on Sony Ericsson Xperia X2:

• Select Start > settings > Connections > Connections Setup.
• Tap OK to configure your device with MMS and gprs/HSPA (Internet) settings

Configure Internet manually on Sony Ericsson Xperia X2:

• Select Start > settings > Connections > Connections.
• Tap Add a new modem connection.
• Enter a name for the connection: victoria mobile
• then select : victoria mobile in the drop-down box, then tap Next.
• Enter the Access point name,: data.victoriamobile.cz
• then tap Next.
• If required, enter User name: lmde
• Password: plus
• Domain and Advanced settings Tap Finish.
• Tap Manage existing connections and select the connection you just created.
• www.victoriamobile.cz

Sony Ericsson W350i GPRS WAP Pay Monthly settings.

Please note all steps must be completed to ensure the settings are correctly configured.

The W350i has a central navigation button (Navi key) and two soft keys slightly above this.

• Press 'Menu' (right softkey).
• Scroll to the 'Connectivity' tab by pressing the Navi key to the right.
• Scroll to 'Data communication' and press 'Select' (left softkey).
• Highlight 'Data accounts' and press 'Select' (left softkey).
• Highlight 'New account' and press 'Add' (left softkey).
• On the 'Account type' screen, highlight 'PS data' and press 'Select' (left softkey).
• On the 'Account Name' screen, enter : victoria mobile press 'Continue' (left softkey).
• On the 'New PS data' screen, highlight 'APN' press 'Edit' (left softkey), enter : data.victoriamobile.cz and press 'OK' (left softkey).
• Highlight 'Username: lmde and press 'OK' (left softkey).
• Highlight 'Password: plus and press 'OK' (left softkey).
• Press 'Save' (right softkey).
• Press the 'back' arrow key (key directly below left softkey) 2 times.
• Activate GPRS settings:
  • Highlight 'Internet settings' and press 'Select' (left softkey).
  • Highlight 'Internet profiles' and press 'Select' (left softkey).
  • Highlight 'New profile' and press 'Add' (left softkey).
  • Highlight 'Name:' press 'Add' (left softkey), enter victoria mobile and press 'OK' (left softkey).
  • Highlight 'Connect using' press 'Select' (left softkey), highlight victoria mobile and press 'Select' (left softkey).
  • Press 'Save' (right softkey).
• Change GPRS settings:
  • Highlight victoria mobile and press 'More' (right softkey).
  • Highlight 'Settings' and press 'Select' (left softkey).
  • Ignore 'Connect using'
  • Highlight 'Use proxy:disable
  
  
  Change Homepage:
  • Highlight victoria mobile and press 'More' (right softkey).
  • Highlight 'Advanced' and press 'Select' (left softkey).
  • Highlight 'Change homepage' and press 'Select' (left softkey).
  • Highlight 'Name:' and press 'Edit' (left softkey). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter victoria mobile and press 'OK' (left softkey).
  • Highlight 'Address:' and press 'Edit' (left softkey). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter www.victoriamobile.cz and press 'OK' (left softkey).
  • Press 'Save' (right softkey).
  • Press the backward arrow key (key directly below left hand soft key).
  • Highlight victoria mobile and press 'Select' (left softkey).
  • Press the "back" button (to left of Navi key) 3 times to return to the standby screen.

The handset has a central navigation button (Navi key) and 2 soft keys to either side of it.

• Select 'Menu' (press Navi key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Push the Navi key 4 times to the right until it shows 'Connectivity' along the top of the screen, highlight 'Internet settings' and 'Select' (press Navi key).
• Highlight 'Connect using:' and 'Select' (press Navi key).
• Press 'Options' (left soft key), highlight 'Create New' and 'Select' (press Navi key).
• Highlight 'PS data' and 'Select' (press Navi key).
• Highlight 'Name' and 'Edit' (press Navi key), enter victoria mobile and then 'OK' (press Navi key).
• Highlight 'APN' and 'Edit' (press Navi key), enter data.victoriamobile.cz and then 'OK' (press Navi key).
• Press 'Save' (left soft key).
• Highlight victoria mobile and press 'Options' (left soft key).
• Highlight 'Edit' and then 'Select' (press Navi key).
• Ignore 'APN' as already entered.
• Highlight 'Username: lmde
• Highlight 'Password: plus
• Check 'Login request' is preset at 'Off'.
• Check 'IP address' is preset blank.
• Check DNS address' is preset blank.
• Highlight 'Authentication' and then 'Edit' (press Navi key), check that only 'PAP' is marked (remove mark by pressing the Navi key to 'Unmrk', ), then 'Save' (left soft key).
• Check 'Data compression' is preset at 'Off'.
• Check 'Header compr.' is preset at 'Off'.
• Highlight 'HTTP' and then 'Select' (press Navi key).
• Tap 'Back' 4 times.
• Highlight victoria mobile and then 'Select' (press Navi key), then press 'Save' (left soft key).

• Tap Menu
• Tap Control panel
• Tap Connections
• Tap Internet accounts
• Tap More
• Tap New account
• Tap Data
• Tap Account name and enter victoria mobile then tap Done
• Tap Address and enter data.victoriamobile.cz then tap Done
• Tap the box next to the Username and password required to insert a tick
• Tap Username and enter : lmde then tap Done
• Tap Password and enter: plus and tap Done
• Tap More
• Tap Proxy: disable
• Tap Save twice
• Tap No to the question about setting the account to a group Setting up a new group.
• On the Internet accounts screen tap More then tap New account
• Tap Group account
• Name the group victoria mobile and tap Next
• Tap Add new account
• Tap the victoria mobile box to place a tick then tap Done
• Tap the box next to victoria mobile to insert a tick
• Tap Save then tap the Groups tab
• On the Internet accounts screen tap More
• Tap Preferred group
• Tap on the Preferred box, hightlight victoria mobile and tap Select, then tap Save
• Tap Done
• Tap the Back arrow three times to return to the menu screen.

• Scroll to 'Settings' and Select (left soft key).
• Push the navi key to the right 4 times until it shows 'Connectivity' along the top of the screen, then highlight 'Data comm.' and press 'Select' (left soft key).
• Highlight 'Data accounts' and press 'Select' (left soft key).
• Highlight 'New account' and press 'Select' (left soft key).
• On the 'Account type' screen, highlight 'GPRS data' and press 'Select' (left soft key).
• On the name 'New Account' screen enter victoria mobile press 'OK' (left soft key).
• On the 'New GPRS Data' screen, highlight 'APN' and press 'Edit' (left soft key). Enter: data.victoriamobile.cz and press 'OK' (left soft key).
• Highlight 'Username' and press 'Edit' (left soft key). Enter lmde and press 'OK' (left soft key).
• Highlight 'Password' and press 'Edit' (left soft key). Enter plus and press 'OK' (left soft key).
• Press 'Save' (right soft key).
• Press the 'back' arrow key (key directly below left soft key) 2 times.
• Activate GPRS settings:
  • Highlight 'Internet settings' and press 'Select' (left soft key).
  • Highlight 'Internet profiles' and press 'Select' (left soft key).
  • Highlight 'New profile' and press the left hand soft key 'Add'. Highlight 'Name:' and press the left hand soft key 'Add'. Enter victoria mobile and press the left hand soft key 'OK'.
  • Highlight 'Connect using' and press 'Select' (left soft key). Highlight victoria mobile and press 'Select' (left soft key).
  • Press the right hand soft key 'Save'.
• Change GPRS settings:
  • Highlight victoria mobile and press the right hand soft key 'More'.
  • Highlight 'Settings' and press 'Select' (left soft key).
  • Highlight 'Connect using', press 'Select' (left soft key).
  • Highlight 'Internet mode' and press 'Select' (left soft key).
  • Highlight 'wap' and press 'Select' (left soft key).
  • Highlight 'Gateway address:disable Ignore 'Security' this should be set to 'Off'
  • Highlight 'Username', enter lmde Press OK (left soft key).
  • Highlight Password. Enter 'password: plus press OK (Left soft key).
  • Press the right hand soft key 'Save'.
• Change Homepage:
  • Highlight victoria mobile and press the right hand soft key 'More'.
  • Highlight 'Advanced' and press 'Select' (left soft key).
  • Highlight 'Change homepage' and press 'Select' (left soft key).
  • Highlight 'Name:' and press 'Edit' (left soft key). Hold the 'c' button (to the right of the Navikey) down to clear any text in the field. Enter victoria mobile and press 'OK' (left soft key).
  • Highlight 'Address:' and press 'Edit' (left soft key). Hold the 'c' button (to the right of the Navikey) down to clear any text in the field. Enter www.victoriamobile.cz and press the left hand soft key 'OK'.
  • Press the right hand soft key 'Save'.
  • Press the backward arrow key (key directly below left hand soft key).
  • Highlight victoria mobile and press 'Select' (left soft key).
  • Press the 'back' button (to left of Navi key) 4 times to return to the standby screen.

The W200i has a central navigation button (Navi key) and two soft keys slightly above this.

• Press 'Menu' (right soft key).
• Highlight 'Settings' and press 'Select' (left soft key).
• Highlight 'Connectivity' and 'Select' (left soft key).
• Highlight 'Data comm.' and 'Select' (left soft key).
• Highlight 'Data accounts' and 'Select' (left soft key).
• Highlight 'New account' and 'Add' (left soft key).
• On the 'Account type' screen, highlight 'GPRS data' and press 'Select' (left soft key).
• On the 'Account Name' screen, enter victoria mobile , press 'Continue' (left soft key).
• On the 'New GPRS data' screen, highlight 'APN' press 'Edit' (left soft key), enter data.victoriamobile.cz and press 'OK' (left soft key).
• Highlight 'Username' press 'Edit' (left soft key), enter: lmde and press 'OK' (left soft key).
• Highlight 'Password' press 'Edit' (left soft key), enter: plus and press 'OK' (left soft key).
• Press 'Save' (right soft key).
• Press the 'back' arrow key (key directly below left soft key) 2 times.
• Activate GPRS settings:
  • Highlight 'Internet settings' and press 'Select' (left soft key).
  • Highlight 'Internet profiles' and press 'Select' (left soft key).
  • Highlight 'New profile' and press 'Add' (left soft key).
  • Highlight 'Name:' press 'Add' (left soft key), enter victoria mobile and press 'OK' (left soft key).
  • Highlight 'Connect using' press 'Select' (left soft key), highlight victoria mobile and press 'Select' (left soft key).
  • Press 'Save' (right soft key).
• Change GPRS settings:
  • Highlight victoria mobile and press 'More' (right soft key).
  • Highlight 'Settings' and press 'Select' (left soft key).
  • Ignore 'Connect using'
  • Highlight 'Use proxy:' press 'Select' (left soft key), highlight : no and 'Select' (left soft key).
• Change Homepage:
  • Highlight victoria mobile and press 'More' (right soft key).
  • Highlight 'Advanced' and press 'Select' (left soft key).
  • Highlight 'Change homepage' and press 'Select' (left soft key).
  • Highlight 'Name:' and press 'Edit' (left soft key). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter victoria mobile and press 'OK' (left soft key).
  • Highlight 'Address:' and press 'Edit' (left soft key). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter www.victoriamobile.cz and press 'OK' (left soft key).
  • Press 'Save' (right soft key).
  • Press the backward arrow key (key directly below left hand soft key).
  • Highlight victoria mobile and press 'Select' (left soft key).
  • Press the 'back' button (to left of Navi key) 3 times to return to the standby screen.

• Open Menu -> Settings -> Connectivity -> Internet Settings -> Internet profiles -> New profile.
• Press Add.
• Open Name and type victoria mobile.
• Open Connect using -> New Account -> GPRS data.
• Fill your parameters as shown below.
• Name : victoria mobile
• A PN: data.victoriamobile.cz
• Username: lmde
• Password: plus
• Press Save.
• Highlight victoria mobile and press Select and press Save.
• Highlight victoria mobile and press More, then open Settings.
• Fill your parameters as shown below.
• Connect using: victoria mobile
• Proxy: disable.
• Press Save.
• Highlight victoria mobile and press More, then open Advanced -> Change homepage.
• Select Name and type victoria mobile, press OK.
• Select Address and type http://www.victoriamobile.cz, press OK.
• Press Save.
• Return to Internet profiles.
• Highlight victoria mobile and press Select.
• To start WAP session return to Menu and open Internet services.
• Press More -> Go to and select victoria mobile.
• To finish WAP session press More -> Exit WAP.
• Finish.

• Press 'Menu' (press Navi key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Press the Navi key 4 times to the right to select the "Connectivity' tab.
• Highlight 'Internet settings' and 'Select' (press Navi key).
• Highlight 'Internet profile' and 'Select' (press Navi key).
• Highlight 'Connect using:' and 'Select' (press Navi key).
• Press 'Options' (left soft key).
• Highlight 'Create new' and 'Select' (press Navi key).
• Highlight 'PS data' and 'Select' (press Navi key).
• Highlight 'Name' and press 'Edit' (press Navi key), enter victoria mobile and press 'OK' (press Navi key).
• Highlight 'APN' and press 'Edit' (press Navi key), enter data.victoriamobile.cz and press 'OK' (press Navi key).
• Press 'Save' (left soft key).
• Highlight your new account and press 'Options' (left soft key).
• Highlight 'Edit' and 'Select' (press Navi key).
• Ignore 'APN' as you entered this information in step 13.
• Highlight 'Username' and press 'Edit' (press Navi key), enter lmde and press 'OK' (press Navi key).
• Highlight 'Password' and press 'Edit' (press Navi key), enter plus and press 'OK' (press Navi key).
• Highlight 'Login request' and press 'Edit' (press Navi key), highlight 'Off' and press 'Select' (press Navi key).
• Press 'Back' (right soft key) 3 times.
• Highlight your new account and press 'Select' (press Navi key, this will activate it).
• Highlight 'Homepage' and 'Select' (press Navi key).
• Highlight 'Name' and press 'Edit' (press Navi key), enter victoria mobile and press 'OK' (press Navi key).
• Highlight 'Address' and press 'Edit' (press Navi key), enter www.victoriamobile.cz and press 'OK' (press Navi key).
• Press 'Yes' (press Navi key) to the question "Save?".
• Press 'Back' (right soft key) 5 times to return to the standby screen

GSM/GPRS/MMS/ Internet settings

The Sony Ericsson P990i has the function to download all the relevant settings automatically via MMS. To do this, follow the instruction below.

• Tap 'Menu'.
• Tap 'Tools'.
• Tap 'Control panel'.
• Tap 'Connections'.
• Tap 'Internet wizard'.
• Tap 'Accept' to the message, "Your phone will now download settings.
• Your handset will now download the settings.
• Once downloaded tap 'Done'.

• Press Menu (Navi key)
• Highlight Settings and Select (press Navi key)
• Highlight Connectivity and Select (press Navi key)
• Highlight Internet settings and Select (press Navi key)
• Highlight Connect using: and Select (press Navi key)
• Press Options (left soft key), highlight Create New and Select (press Navi key)
• Highlight PS data and Select (press Navi key)
• Highlight Name and Edit (press Navi key), enter victoria mobile and then OK (press Navi key)
• Highlight APN and Edit (press Navi key), enter data.victoriamobile.cz and then OK (press Navi key)
• Press Save (left soft key)
• Highlight victoria mobile and press Options (left soft key)
• Highlight Edit and then Select (press Navi key)
• Skip past APN as you've already entered this
• Highlight Username and then Edit (press Navi key), enter lmde and Save (press Navi key)
• Highlight Password and then Edit (press Navi key), enter password: plus and Save (press Navi key)
• Check that Login request is set at Off
• Check that IP address is set at blank
• Check that DNS address is set at blank
• Highlight Authentication and then Edit (press Navi key), check that only PAP is marked (remove the tick by highlight the option and then press the Navi key to Unmark), then Save (left soft key)
• Check that Data compression is set at Off
• Check that Header compr. is set at Off
• Highlight Proxy settings and then Edit (press Navi key)
• Highlight Proxy and then Edit (press Navi key), highlight Off and Select (press Navi key)
• Tap Back (right soft key) four times

Please note all steps must be completed to ensure the settings are correctly configured.

The phone has four directional Navi key with a central Select key, there are also two soft keys on either side of this.

• Select the Menu (Navi key)
• Highlight Settings and Select (press Navi key)
• Highlight Connectivity and Select (press Navi key)
• Highlight Internet settings and Select (press Navi key)
• Highlight Connect using: and Select (press Navi key)
• Press Options (left soft key), highlight Create New and Select (press Navi key)
• Highlight PS data and Select (press Navi key)
• Highlight Name and Edit (press Navi key), enter victoria mobile and then OK (press Navi key)
• Highlight APN and Edit (press Navi key), enter data.victoriamobile.cz and then OK (press Navi key)
• Press Save (left soft key)
• Highlight victoria mobile and press Options (left soft key)
• Highlight Edit and then Select (press Navi key)
• Skip past APN as you've already entered this
• Highlight Username: lmde and Save (press Navi key)
• Highlight Password : plus and Save (press Navi key)
• Check that Login request is set at Off
• Check that IP address is set at blank
• Check that DNS address is set at blank
• Highlight Authentication and then Edit (press Navi key), check that only PAP is marked (remove the tick by highlight the option and then press the Navi key to Unmark), then Save (left soft key)
• Check that Data compression is set at Off
• Check that Header compr. is set at Off
• Highlight Proxy settings and then Edit (press Navi key)
• Highlight Proxy and then Edit (press Navi key), highlight disable and Select (press Navi key)
• Check that Same for all servers is set at Off.

• Press the Menu button (Navi key).
• Scroll to 'Connectivity' and press Select (left softkey).
• Highlight 'Data comm.' and press Select (left softkey).
• Highlight 'Data accounts' and press Select (left softkey).
• Highlight 'New account' and press Add (left softkey).
• Highlight 'GPRS data' and press Select (left softkey).
• Enter victoria mobile and press Ok (left softkey).
• Highlight 'APN' and press Edit (left softkey). Enter data.victoriamobile.cz and press Ok (left softkey).
• Highlight 'User : lmde and press Ok (left softkey).
• Highlight 'Password' : plus and press Ok (left softkey).
• Press Save (right softkey).
• Press the back arrow key (key directly below left softkey) 2 times.
• GPRS settings:
  • Highlight 'WAP options' and press Select (left softkey).
  • Highlight 'WAP profiles' and press Select (left softkey).
  • Highlight 'New profile' and press Add (left softkey).
  • Enter victoria mobile and press Ok (left softkey).
  • Highlight 'Connect using' and press Edit (left softkey).
  • Highlight 'victoria mobile and press Select (left softkey).
  • Press Save (right softkey).
• Change GPRS settings:
  • Highlight victoria mobile and press Edit (right softkey).
  • Highlight 'Advanced' and press Select (left softkey).
  • Highlight 'Change homepage' and press Select (left softkey).
  • Enter victoria mobile and press Ok (left softkey). (Press and hold the 'C' key to clear any text in the field)
  • Then enter www.victoriamobile.cz and press Ok (left softkey). (Press and hold the 'C' key to clear any text in the field)
  • Press the back arrow key (key directly below left soft key) 3 times to return to the standby screen.

• Select Menu (press Navi key).
• Highlight Settings and Select (press Navi key).
• Push the Navi key four times to the right until it shows Connectivity along the top of the screen, highlight Internet settings and Select (press Navi key).
• Highlight Connect using: and Select (press Navi key).
• Press Options (left soft key), highlight Create New and Select (press Navi key).
• Highlight PS data and Select (press Navi key).
• Highlight Name and Edit (press Navi key), enter victoria mobile and then OK (press Navi key).
• Highlight APN and Edit (press Navi key), enter data.victoriamobile.cz and then OK (press Navi key).
• Press Save (left soft key).
• Highlight victoria mobile and press Options (left soft key).
• Highlight Edit and then Select (press Navi key).
• Skip past APN as already entered.
• Highlight Username : lmde and Save (press Navi key).
• Highlight Password : plus and Save (press Navi key).
• Check Login request is preset at Off.
• Check IP address is preset blank.
• Check DNS address is preset blank.
• Highlight Authentication and then Edit (press Navi key), check that only PAP is marked (remove mark by pressing the Navi key to Unmrk), then Save (left soft key).
• Check Data compression is preset at Off.
• Check Header compr. is preset at Off.
• Highlight Proxy settings and then Edit (press Navi key).
• Highlight Proxy and then Edit (press Navi key), highlight disable and Select (press Navi key).
• Check Same for all servers is preset at Off.
• Highlight victoria mobile and then Select (press Navi key), then press Save (left soft key).

• Select 'Menu' (press Navi key).
• Highlight ‘Settings’ and 'Select' (press Navi key).
• Push the Navi key four times to the right until it shows ‘Connectivity’ along the top of the screen, highlight ‘Internet settings’ and ‘Select’ (press Navi key).
• Highlight 'Connect using:' and 'Select' (press Navi key).
• Press 'Options' (left soft key), highlight 'Create New' and 'Select' (press Navi key).
• Highlight 'PS data' and 'Select' (press Navi key).
• Highlight 'Name' and 'Edit' (press Navi key), enter victoria mobile and then 'OK' (press Navi key).
• Highlight 'APN' and 'Edit' (press Navi key), enter data.victoriamobile.cz and then 'OK' (press Navi key).
• Press 'Save' (left soft key).
• Highlight victoria mobile and press 'Options' (left soft key).
• Highlight 'Edit' and then 'Select' (press Navi key).
• Skip past 'APN' as you've already entered it.
• Highlight 'Username' and then 'Edit' (press Navi key), enter lmde and 'Save' (press Navi key).
• Highlight 'Password' and then 'Edit' (press Navi key), enter plus and 'Save' (press Navi key).
• Check that 'Login request' is preset at 'Off'.
• Check that 'IP address' is preset blank.
• Check that 'DNS address' is preset blank.
• Highlight 'Authentication' and then 'Edit' (press Navi key), check that only 'PAP' is marked (remove mark by pressing the Navi key to 'Unmrk', ), then 'Save' (left soft key).
• Check that 'Data compression' is preset at 'Off'.
• Check that 'Header compr.' is preset at 'Off'.
• Highlight 'Proxy settings' and then 'Edit' (press Navi key).
• Highlight 'Proxy' and then 'Edit' (press Navi key), highlight 'Off' and 'Select' (press Navi key).
• Tap 'Back' four times.
• Highlight victoria mobile and then 'Select' (press Navi key), then press 'Save' (left soft key).

• Press the Menu key (white key)
• Tap Settings
• Tap Connectivity
• Tap Destinations
• Tap Access point
• Tap No to the question,Automatically check for available access points?
• Tap Packet data
• Tap the text box to enter victoria mobile when entered tap the green tick, then tap OK
• Tap WAP services
• On the Network destinations screen, tap WAP services
• Tap victoria mobile
• Skip past Connection name and Data bearer as you've already filled these in
• Tap Access point name and tap the text box to enter: data.victoriamobile.cz when entered tap the green tick, then tap OK
• Tap Username and tap the text box to enter lmde when entered tap the green tick, then tap OK
• Skip past Prompt password as this is preset at No
• Tap Password and tap the text box to enter password: plus when entered tap the green tick, then tap OK
• Tap Authentication until it shows Normal
• Tap Homepage and tap the text box to enter: www.victoriamobile.cz when entered tap the green tick, then tap OK
• Tap Use access point until it shows After confirmation
• Tap Options and then tap Advanced settings
• Skip past Network type as this is preset to IPv4
• Skip past Phone IP address and DNS address as these are preset to Automatic
• Tap Proxy server address: disable
• Tap Back twice
• Tap Options
• Tap Organize and then tap Change priority
• Tap the position you require (this would usually be number 1) and then tap OK
• Tap Back five times, to return to the standby screen.

• Sony Ericsson K790i GPRS WAP Pay Monthly settings
• Please note all steps must be completed to ensure the settings are correctly configured.
• The handset has a central navigation button (Navi key) and 2 soft keys to either side of it.
• Select 'Menu' (left soft key).
• Highlight 'Settings' and 'Select' (press Navi key).
• Push the Navi key 4 times to the right until it shows 'Connectivity' along the top of the screen, highlight 'Internet settings' and 'Select' (press Navi key).
• Highlight 'Internet profiles' and 'Select' (press Navi key).
• Highlight 'New profile' and 'Add' (press Navi key).
• Highlight 'Name:' and 'Add' (press Navi key), enter: victoria mobile and then 'OK' (left soft key).
• Highlight 'Connect using:' and 'Select' (press Navi key).
• Highlight 'New account' and 'Add' (press Navi key).
• Highlight 'PS data' and 'Select' (press Navi key).
• Highlight 'Name' and 'Edit' (press Navi key), enter: victoria mobile and then 'Continue' (left soft key).
• Highlight 'APN' and 'Edit' (press Navi key), enter: data.victoriamobile.cz and then 'OK' (press Navi key).
• Highlight 'Username': lmde
• Highlight 'Password: plus
• Press 'Save' (right soft key).
• Highlight victoria mobile and 'Select' (left soft key).
• Press 'Save' (right soft key).
• Highlight victoria mobile and press 'More' (right soft key).
• Highlight 'Settings' and 'Select' (left soft key).
• Ignore 'Connect using' as we have just entered that detail.
• Highlight 'Use proxy:' disable
• Press 'Save' (right soft key).
• Highlight victoria mobile and press 'More' (right soft key).
• Highlight 'Advanced' and 'Select' (left soft key).
• Highlight 'Change homepage' and 'Select' (left soft key).
• Highlight 'Name:' and 'Edit' (left soft key), enter victoria mobile and then 'OK' (left soft key).
• Highlight 'Address' and 'Edit' (left soft key), enter www.victoriamobile.cz and then 'OK' (left soft key).
• Press 'Save' (right soft key).
• Press the 'Back arrow' key.
• Highlight victoria mobile and press 'Select' (left soft key, this will make this account your active profile).
• Press the 'Back arrow' key three times to return to the standby screen.

• Please note all steps must be completed to ensure the settings are correctly confi.
• The phone has four directional Navi key with a central Select key, there are also two soft keys on either side of this.
• Select the Menu (Navi key)
• Highlight Settings and Select (press Navi key)
• Highlight Connectivity and Select (press Navi key)
• Highlight Internet settings and Select (press Navi key)
• Highlight Connect using: and Select (press Navi key)
• Press Options (left soft key), highlight Create New and Select (press Navi key)
• Highlight PS data and Select (press Navi key)
• Highlight Name and Edit (press Navi key), enter victoria mobile and then OK (press Navi key)
• Highlight APN and Edit (press Navi key), enter data.victoriamobile.cz and then OK (press Navi key)
• Press Save (left soft key)
• Highlight victoria mobile and press Options (left soft key)
• Highlight Edit and then Select (press Navi key)
• Skip past APN as you've already entered this
• Highlight Username : lmde and Save (press Navi key)
• Highlight Password : plus and Save (press Navi key)
• Check that Login request is set at Off
• Highlight Authentication and then Edit (press Navi key), check that only PAP is marked (remove the tick by highlight the option and then press the Navi key to Unmark), then Save (left soft key)
• Check that Data compression is set at Off
• Check that Header compr. is set at Off
• Highlight Proxy settings and then Edit (press Navi key)
• Highlight Proxy and then Edit (press Navi key), highlight Off and Select (press Navi key)
• Tap Back (right soft key) four times
• Highlight victoria mobile and then Select (press Navi key), then press Save (left soft key).

• Please note all steps must be completed to ensure the settings are correctly configured.
• Select Menu (press Navi key).
• Highlight Settings and Select (press Navi key).
• Push the Navi key four times to the right until it shows Connectivity along the top of the screen, highlight Internet settings and Select (press Navi key).
• Highlight Accounts and Select (press Navi key).
• Press Options (left soft key), highlight Create New and press OK (Navi key).
• In Name enter: victoria mobile and then press OK (Navi key)
• Highlight victoria mobile and press Options (left soft key)
• Highlight Edit and press OK (Navi key)
• Skip past Name as you've already entered this
• Highlight Homepage and Edit (press Navi key): www.victoriamobile.cz and press OK (Navi key).
• Highlight Preferred connect. and Edit (press Navi key), highlight PS and Select (press Navi key)
• Highlight Proxy and Edit (press Navi key): disable
• Press Back (right soft key)
• Skip past GSM
• Highlight PS data and Edit (press Navi key)
• Highlight Username : lmde and OK (press Navi key)
• Highlight Password : plus and OK (press Navi key)
• Highlight APN and Edit (press Navi key): data.victoriamobile.cz and then OK (press Navi key)
• Press Back (right soft key)
• Press Save (left soft key)
• Highlight victoria mobile and Select (press Navi key, this account will now have a black dot next to it to confirm it's active).
• Press Back (right soft key) three times to return to the standby screen.

• Press the Menu key (white key)
• Tap Settings
• Tap Connectivity
• Tap Destinations
• Tap Access point
• Tap No to the question, Automatically check for available access points?
• Tap Packet data
• Tap the text box to enter victoria mobile when entered tap the green tick, then tap OK
• Tap WAP services
• On the Network destinations screen, tap WAP services
• Tap victoria mobile twice
• Skip past Connection name and Data bearer as you've already filled these in
• Tap Access point name and tap the text box to enter: data.victoriamobile.cz when entered tap the green tick, then tap OK
• Tap Username : lmde, when entered tap the green tick, then tap OK
• Skip past Prompt password as this is preset : plus
• Tap Password : plus when entered tap the green tick, then tap OK
• Tap Authentication until it shows Normal
• Tap Homepage and tap the text box to enter www.victoriamobile.cz when entered tap the green tick, then tap OK
• Tap Use access point until it shows After confirmation
• Tap Options and then tap Advanced settings
• Skip past Network type as this is preset to IPv4
• Skip past Phone IP address and DNS address as these are preset to Automatic
• Tap Proxy server: disable
• Tap Proxy port number
• Tap Back twice
• Tap Options
• Tap Organise and then tap Change priority
• Tap the position you require (this would usally be number 1) and then tap OK
• Tap Back five times, to return to the standby screen

• The K510i has a central navigation button (Navi key) and two soft keys slightly above this.
• Highlight 'Settings' and press 'Select' (left softkey).
• Highlight 'Connectivity' and press 'Select' (left softkey).
• Scroll to 'Data comm.' and press 'Select' (left softkey).
• Highlight 'Data accounts' and press 'Select' (left softkey).
• Highlight 'New account' and press 'Add' (left softkey).
• On the 'Account type' screen, highlight 'GPRS data' and press 'Select' (left softkey).
• On the 'Account Name' screen, enter victoria mobile, press 'Continue' (left softkey).
• On the 'New GPRS data' screen, highlight 'APN' press 'Edit' (left softkey), enter : data.victoriamobile.cz and press 'OK' (left softkey).
• Highlight 'Username': lmde press 'OK' (left softkey).
• Highlight 'Password: plus press 'OK' (left softkey).
• Press 'Save' (right softkey).
• Press the 'back' arrow key (key directly below left softkey) 2 times.
• Activate GPRS settings:
  • Highlight 'Internet settings' and press 'Select' (left softkey).
  • Highlight 'Internet profiles' and press 'Select' (left softkey).
  • Highlight 'New profile' and press 'Add' (left softkey).
  • Highlight 'Name:'victoria mobile and press 'OK' (left softkey).
  • Highlight 'Connect using' press 'Select' (left softkey), highlight victoria mobile and press 'Select' (left softkey).
  • Press 'Save' (right softkey).
• Change GPRS settings:
  • Highlight victoria mobile and press 'More' (right softkey).
  • Highlight 'Settings' and press 'Select' (left softkey).
  • Ignore 'Connect using'
  • Highlight 'Use proxy: disable.
• Change Homepage:
  • Highlight victoria mobile and press 'More' (right softkey).
  • Highlight 'Advanced' and press 'Select' (left softkey).
  • Highlight 'Change homepage' and press 'Select' (left softkey).
  • Highlight 'Name:' and press 'Edit' (left softkey). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter victoria mobile and press 'OK' (left softkey).
  • Highlight 'Address:' and press 'Edit' (left softkey). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter www.victoriamobile.cz and press 'OK' (left softkey).
  • Press 'Save' (right softkey).
  • Press the backward arrow key (key directly below left hand soft key).
  • Highlight victoria mobile and press 'Select' (left softkey).
  • Press the 'back' button (to left of Navi key) 3 times to return to the standby screen.

• Sony Ericsson K320i GPRS WAP Pay Monthly settings
• Please note all steps must be completed to ensure the settings are correctly configured.
• Press 'Menu' (right softkey).
• Highlight 'Settings' and press 'Select' (left softkey).
• Highlight 'Connectivity' and press 'Select' (left softkey).
• Scroll to 'Data comm.' and press 'Select' (left softkey).
• Highlight 'Data accounts' and press 'Select' (left softkey).
• Highlight 'New account' and press 'Add' (left softkey).
• On the 'Account type' screen, highlight 'GPRS data' and press 'Select' (left softkey).
• On the 'Account Name' screen, enter: victoria mobile press 'Continue' (left softkey).
• On the 'New GPRS data' screen, highlight 'APN' press 'Edit' (left softkey), enter data.victoriamobile.cz and press 'OK' (left softkey).
• Highlight 'Username: lmde press 'OK' (left softkey).
• Highlight 'Password: plus and press 'OK' (left softkey).
• Press 'Save' (right softkey).
• Press the 'back' arrow key (key directly below left softkey) 2 times.
• Activate GPRS settings:
  • Highlight 'Internet settings' and press 'Select' (left softkey).
  • Highlight 'Internet profiles' and press 'Select' (left softkey).
  • Highlight 'New profile' and press 'Add' (left softkey).
  • Highlight 'Name:' press 'Add' (left softkey), enter: victoria mobile and press 'OK' (left softkey).
  • Highlight 'Connect using' press 'Select' (left softkey), highlight victoria mobile and press 'Select' (left softkey).
  • Press 'Save' (right softkey).
• Change GPRS settings:
  • Highlight victoria mobile and press 'More' (right softkey).
  • Highlight 'Settings' and press 'Select' (left softkey).
  • Ignore 'Connect using'
  • Highlight 'Use proxy:'press 'Select' (left softkey), highlight 'Yes' and 'Select' (left softkey).
  • Highlight 'Proxy address:'
• Change Homepage:
  • Highlight victoria mobile and press 'More' (right softkey).
  • Highlight 'Advanced' and press 'Select' (left softkey).
  • Highlight 'Change homepage' and press 'Select' (left softkey).
  • Highlight 'Name:' and press 'Edit' (left softkey). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter victoria mobile and press 'OK' (left softkey).
  • Highlight 'Address:' and press 'Edit' (left softkey). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter www.victoriamobile.cz and press 'OK' (left softkey).
  • Press 'Save' (right softkey).
  • Press the backward arrow key (key directly below left hand soft key).
  • Highlight victoria mobile and press 'Select' (left softkey).
  • Press the 'back' button (to left of Navi key) 3 times to return to the standby screen.

Please note all steps must be completed to ensure the settings are correctly configured.

The W850i has a central navigation button (Navi key) and two soft keys slightly above this.

• Press 'Menu' (right soft key).
• Highlight 'Settings' and press 'Select' (left soft key).
• Scroll to the 'Connectivity' tab by pressing the Navi key to the right.
• Scroll to 'Data communication' and press 'Select' (left soft key).
• Highlight 'Data accounts' and press 'Select' (left soft key).
• Highlight 'New account' and press 'Add' (left soft key).
• On the 'Account type' screen, highlight 'PS data' and press 'Select' (left soft key).
• On the 'Account Name' screen, victoria mobile press 'Continue' (left soft key).
• On the 'New PS data' screen, highlight 'APN' press 'Edit' (left soft key), data.victoriamobile.cz and press 'OK' (left soft key).
• Highlight 'Username' press 'Edit' (left soft key), enter lmde and press 'OK' (left soft key).
• Highlight 'Password' press 'Edit' (left soft key), enter plus and press 'OK' (left soft key).
• Press 'Save' (right soft key).
• Press the 'back' arrow key (key directly below left soft key) 2 times.

Activate GPRS settings:

• Highlight victoria mobile and press 'Select' (left soft key).
• Highlight victoria mobile and press 'Select' (left soft key).
• Highlight 'New profile' and press 'Add' (left soft key).
• Highlight 'Name:' press 'Add' (left soft key), enter victoria mobile and press 'OK' (left soft key).
• Highlight 'Connect using' press 'Select' (left soft key), highlight victoria mobile and press 'Select' (left soft key).
• Press 'Save' (right soft key).
• Highlight 'Username' press 'Edit' (left soft key), enter lmde and press OK (left soft key).
• Highlight 'Password' press 'Edit' (left soft key), enter plus and press OK (left soft key).
• Press 'Save' (right soft key).

• Go to Menu > Tools > Settings > Connection
• Select Access Points > Options > New access point > Use default settings
• Name the connection: victoria mobile
• Data bearer to GPRS
• Access point name (APN): data.victoriamobile.cz
• Username: lmde
• Promt password: plus
• Password: plus
• Set Authentication to Normal
• Homepage: www.victoriamobile.cz
• Back * 2
• Select Packet data
• Set Packet data Conn. to When available
• Leave Access point blank
• Finished

• From the Main Menu, select Tools and go to Settings.
• Select Connection and then select Access Point.
• Select Options and then select New access point. Then select Use default settings.
• Connection Name: victoria mobile
• Data Bearer -GPRS
• Access Point Name: data.victoriamobile.cz
• Username: lmde
• Prompt Password: plus
• Password: plus
• Authentication: Normal
• Homepage: www.victoriamobile.cz

• Go to Menu > Tools > Settings > Connection
• Select Access Points > Options > New access point > Use default settings
• Name the connection: victoria mobile
• Data bearer to GPRS
• Access point name (APN): data.victoriamobile.cz
• Username: lmde
• Promt password: plus
• Password: plus
• Set Authentication to Normal
• Homepage: www.victoriamobile.cz
• Back * 2
• Select Packet data
• Set Packet data conn. to When available
• Leave Access point blank
• Finished

• Go to Menu > Tools > Settings > Connection
• Select Access Points > Options > New access point > Use default settings
• Name the connection: victoria mobile
• Data bearer to GPRS
• Access point name (APN): data.victoriamobile.cz
• Username: lmde
• Promt password: plus
• Password: plus
• Set Authentication to Normal
• Homepage: www.victoriamobile.cz
• Back * 2
• Select Packet data
• Set Packet data Conn. to When available
• Leave Access point blank
• Finished.

• Settings Name: victoria mobile
• Home Page www.victoriamobile.cz
• Session Mode Permanent
• Connection Security: On
• APN: data.victoriamobile.cz
• PDP: Type IP
• Gateway IP Address:
• Login Type Automatic
• User Name: lmde
• Password: plus

• Go to Menu> Tools > Settings> Connection> Access points> Options> New Access point.
• Connection name: victoria mobile
• Data Bearer: Packet data
• Access point name: data.victoriamobile.cz
• User name: lmde
• Prompt password: plus
• Dont change Password
• Authentication: Normal
• Homepage: www.victoriamobile.cz

• Go to Menu > Tools > Settings > Connection
• Select Access Points > Options > New access point > Use default settings
• Name the connection as victoria mobile
• Set Data bearer to Packet data
• Fill in access point name (APN): data.victoriamobile.cz
• Set Username: lmde
• Set Promt password: plus
• Set Password: plus
• Set Authentication to Normal
• Set Homepage: www.victoriamobile.cz
• Back * 2
• Select Packet data
• Set Packet data conn. to When available
• Leave Access point blank
• Finished

After setting up your phone continue with step 2

• Profile name: victoria mobile
• Homepage URL: www.victoriamobile.cz
• Security: Non-secure
• Bearer: GPRS
• IP address:
• Username: lmde
• Password: plus
• APN: data.victoriamobile.cz

• Go to Menu > Settings > Configuration
• Choose Personal configuration settings
• Press Options
• Select Add new and Access point
• Fill in the Account name: victoria mobile
• Select Access point settings
• Set Data bearer to GPRS
• Select Bearer settings
• Enter GPRS access point (APN): data.victoriamobile.cz
• Set Authentication type to Normal
• Enter User name: lmde
• Password: plus
• Back * 3
• Choose Options and Activate
• Go Back
• Set Preferred access point to the access point you just made
• Set Default configuration settings to Personal configuration
• Select Activate default in all applications and Yes

• Press Menu
• Highlight Settings and Select
• Highlight Configuration and Select
• Highlight Personal config. sett. and Select
• Press Add
• Highlight Web and then Select
• Highlight Account Name and then Select, enter victoria mobile then press OK
• Highlight Homepage and then Select, enter www.victoriamobile.cz then press OK
• Highlight User name and then Select, enter lmde then press OK
• Highlight Password and then Select, enter plus then press OK, verify password and again select OK
• Highlight Use pref. access pt. and then Select, highlight No and then Select
• Highlight Access point settings and Select
• Highlight Proxy and then Select, highlight Enable and then Select
• Highlight Proxy address and then Select , enter Proxy IP and then press OK
• Highlight Proxy port and then Select , enter Port No and then press OK
• Highlight Bearer settings and then Select
• Highlight Packet data access point and then Select , enter data.victoriamobile.cz and then press OK
• Skip past Network type this should be set to IPv4
• Skip past Authentication type this should be set as Normal
• Highlight User name and then Select, enter lmde then press OK
• Highlight Password and then Select , enter plus then press OK , verify password and again select OK
• Press Back three times
• Highlight victoria mobile and press Options
• Highlight Activate and then Select
• Press Back four times to return to the standby screen

• Press the menu button
• Highlight Tools and select
• Highlight Settings and select
• Highlight Connection and select
• Highlight Access point and select
• Select Options
• Highlight New access point and select
• Select Connection name and change to victoria mobile and OK
• Highlight Data bearer and select select Packet data and OK
• Highlight Access point name and select, enter data.victoriamobile.cz and OK
• Highlight User name and select, enter lmde and OK
• Highlight Prompt password and press to change to No
• Highlight Password and select, enter plus and OK
• Highlight Authentication and press Navi key to change to Normal.
• Highlight Homepage and select, enter www.victoriamobile.cz and OK
• Press Options, highlight Advanced settings and select
• Highlight Network type and press Navi key to change to IPv4
• Highlight Phone IP address and press Navi key to change to Automatic
• Highlight DNS address and press Navi key to change to Automatic
• Highlight Proxy serv. address and select, enter Proxy IP and OK
• Highlight Proxy port number and select, enter Port No and OK
• Press the right soft key 6 times to get you back to the main menu
• Select Web
• Select Options
• Scroll to Settings and Select
• Highlight General and select
• Highlight Access point and select
• Highlight User defined and select
• Highlight victoria mobile and select
• Press right softkey 3 times to get back to the standby screen

• Go to Main menu, Scroll to Services and press Select
• Scroll down to Settings and press Select
• Select Active Service Settings and press Select
• Select Set1 and press Activate
• Scroll down to Edit Active Service Settings and press Select
• At Settings name, press Select. Enter victoria mobile and press ok
• Homepage: select and enter www.victoriamobile.cz and press ok
• Session mode: Select Permanent
• Connection Security: Select OFF
• Data Bearer: Select GPRS
• GPRS connection: Select when needed
• GPRS Access Point: Enter data.victoriamobile.cz and press ok
• IP address: Enter IP Address and press ok
• Authentication type: Select Normal
• Login Type: Select Manual
• Username: lmde
• Password: plus
• To begin accessing victoria mobile, go to menu -> Services and select Home

• Go to Main menu, Scroll to Services and press Select
• Scroll down to Settings and press Select
• Select Active Service Settings and press Select
• Select Set1 and press Activate
• Scroll down to Edit Active Service Settings and press Select
• At Settings name, press Select. Enter victoria mobile and press ok
• Homepage: select and enter www.victoriamobile.cz and press ok
• Session mode: Select Permanent
• Connection Security: Select OFF
• Data Bearer: Select GPRS
• GPRS connection: Select when needed
• GPRS Access Point: Enter data.victoriamobile.cz and press ok
• IP address: Enter IP Address and press ok
• Authentication type: Select Normal
• Login Type: Select Manual
• Username: lmde
• Password: plus
• To begin accessing victoria mobile, go to menu -> Services and select Home

• Open Menu -> Services -> Settings -> Connection settings -> Active service settings
• Scroll to the desired profile and press Activate
• Open Edit active service settings
• Fill your parameters as shown below:
  • Settings' name: victoria mobile
  • Homepage: www.victoriamobile.cz
  • Session mode: Permanent
  • Connection security: Off
  • Data bearer: GPRS
• Open Bearer settings
• Fill your parameters as shown below:
  • GPRS access point: data.victoriamobile.cz
  • IP address: IP Address
  • Authentication type: Normal
  • Login type: Automatic
  • User name: lmde
  • Password: plus
• To start WAP session return to Services and select Home
• To finish WAP session press NO

• Select Services from Menu
• Select Settings
• Go To Connection settings and select Active service settings
• Select (empty) and press Activate
• Go to Edit active service settings
• Key in the following
• Settings' name: victoria mobile
• Homepage: www.victoriamobile.cz
• Proxy: Disable
• Data bearer: GPRS
• Select Bearer settings
• GPRS access point: data.victoriamobile.cz
• For Postpaid Enter: (Not Required)
• For Prepaid Enter: (Not Required)
• Authentication type: Normal
• Login type: Automatic
• User name: lmde
• Password: plus
• Select Home in Services to start surfing WAP

• Open Menu -> Tools -> Settings -> Connection -> Access points.
• Press Options and then select New access point -> Use default settings.
• Fill your parameters as shown below.
  • Name the connection: victoria mobile.
  • Data bearer to GPRS.
  • Access point name (APN): data.victoriamobile.cz
  • Username: lmde
  • Promt password: plus
  • Password: plus
  • Set Authentication to Normal.
• Homepage: www.victoriamobile.cz
• Press Options and then open Advanced settings.
• Fill your parameters as shown below.
• Network type: IPv4.
• Phone I.p address: automatic.
• Name servers: automatic
• Proxy serv address:
• Port number:
• Return to Menu and then open Services (Web).
• Press Options and then open Settings -> Default access point.
• Select victoria mobile.
• To start WAP session return to Services (Web) and select victoria mobile.
• To finish WAP session press Options and then select Exit.

Settings - GPRS WAP

Please note all steps must be completed to ensure the settings are correctly configured.

The phone has a 4-way directional 'Navi' key and 2 soft keys on either side of this. The Navi key can also be pressed in to select options.

To insert the required symbol (e.g. : / . @) into your settings, simply press the * key, highlight the appropriate symbol and press the Navi key to select.

• Press the Menu button (button underneath the left soft key).
• Scroll to Settings, and then press the Navi key to select.
• Highlight 'Connection', and then press the Navi key to select.
• Highlight 'Access points', then press the Navi key to select.

If no access points defined, you will be asked to 'Define now?' press 'Yes' (left soft key).

• If you are not asked to 'Define access points?' then press Options (left soft key), highlight 'New access point' and then press Select (left soft key).
• Highlight 'Use Default Settings', then press Select (left soft key).
• Highlight 'Connection name', press the Navi key to select then enter victoria mobile and press OK (left soft key).
• Highlight 'Data bearer', then press the Navi key to select. Then highlight victoria mobile and press OK (left soft key).
• Highlight 'Access point name', then press the Navi key to select. Enter data.victoriamobile.cz and then press OK (left soft key).
• Highlight 'Username', and then press the Navi key to select. Enter: lmde and then press OK (left soft key).
• Highlight 'Prompt password', then press the Navi key to select: plus
• Highlight 'Password', then press the Navi key to select. Enter : plus then press OK (left soft key).
• Highlight 'Authentication', and then press the Navi key to select 'Normal'.
• Highlight 'Homepage' then press the Navi key to select. Enter: www.victoriamobile.cz then press OK (left soft key).
• Press Options (left soft key), highlight 'Advanced Settings' and press Select (left soft key).
• Press Back (right soft key) 5 times to return to the Main Menu.
• Scroll to 'Web', and then press the Navi key to select.
• Press Options (left soft key), then highlight 'Settings' and press the Navi key to select.
• Highlight 'Default access point', and then press the Navi key to select.
• Highlight victoria mobile then press Navi key to select.
• Press Back (right soft key) 3 times to return to the standby screen.

• Go to Menu -> Settings -> Configuration -> Personal configuration settings
• Press Add new or press Options and select Add new.
• Select Web.
• Name of the connection : victoria mobile
• Data bearer: packed data.
• Proxy : disable
• Access point name (APN): data.victoriamobile.cz
• Username: lmde
• Promt password: plus
• Password: plus
• Set Authentication to Normal
• Homepage: www.victoriamobile.cz.
• Return to Personal configuration settings.
• Highlight victoria mobile and press Options, then select Activate.
• To start WAP session return to Menu and then open Web-> Home.
• To finish WAP session press NO.
• Finish.

• Open Menu -> Services -> Settings -> Active service settings.
• Scroll to the desired profile and press Activate.
• Open Edit active service settings.
• Fill your parameters as shown below.
• Settings name: victoria mobile.
• Home page: www.victoriamobile.cz.
• Data bearer: gprs.
• Gprs access point: data.victoriamobile.cz
• Set Authentication to Normal.
• Username: lmde
• Password: plus
• To start WAP session return to Services and select Home.
• To finish WAP session press NO.
• Finish.

• Open Menu -> Tools -> Settings -> Connection -> Access points.
• Press Options and then select New access point -> Use default settings.
• Fill your parameters as shown below.
• Name the connection: victoria mobile.
• Data bearer to GPRS.
• Access point name (APN): data.victoriamobile.cz
• Username: lmde
• Prompt password: plus
• Password: plus
• Set Authentication to Normal.
• Homepage: www.victoriamobile.cz
• Press Options and then open advanced settings.
• Fill your parameters as shown below.
• Network type: IPv4.
• Phone I.p address: automatic.
• Name servers: automatic
• Proxy serv address:
• Port number:
• Return to Menu and then open Web.
• Press Options and then open Settings -> Access point -> User defined.
• Select victoria mobile.
• To start WAP session return to Services and select victoria mobile.
• To finish WAP session press Options and then select Exit.
• Finish.

• Open Menu -> Settings -> Configuration settings -> Personal configuration settings.
• Press Add new or press Options and select Add new.
• Select Services (Web).
• Fill your parameters as shown below.
• Account name: victoria mobile
• Homepage: www.victoriamobile.cz.
• Username: lmde
• Prompt password: plus
• Open Access point settings.
• Fill your parameters as shown below.
• Proxy: disable.
• Open Bearer settings.
• Fill your parameters as shown below.
• Gprs access point: data.victoriamobile.cz
• Authentication type: normal
• Username : lmde
• Password: plus
• Return to Personal configuration settings.
• Highlight victoria mobile and press Options, then select Activate.
• To start WAP session return to Menu and then open Services (Web)-> Home.
• To finish WAP session press NO.

Settings - GPRS

You'll need to complete all steps for this to work.

The phone has a 4-way directional 'Navi' key and 2 soft keys on either side of this and 4 additional soft keys either side of the keypad. The Navi key can also be pressed in to select options.

To insert the required symbol (e.g. : / . @) into your settings, simply press the * key, highlight the appropriate symbol and press the Navi key to select.

• Select 'Menu' (Navi Key)
• Select 'Settings' (Navi Key)
• Scroll to and select 'Configuration' (Navi Key)
• Scroll to and select 'Personal config. settings' (Navi Key)
• Select 'Options' (Left Soft Key)
• Scroll to and select 'Add new' (Navi Key)
• Select 'Web' (Navi Key)
• Select 'Account Name' (Navi Key), enter victoria mobile and press 'OK' (Navi Key)
• Highlight and select 'Homepage' (Navi Kay), enter www.victoriamobile.cz and select 'OK' (Navi Key)
• Highlight and select 'Username', enter lmde and select 'OK' (Navi Key)
• Highlight and select 'Password', enter plus and select 'OK', verify password and again select 'OK' (Navi Key)
• Highlight and select 'Use preferred access pt.' select 'No'. (Navi Key)
• Highlight and select 'Access point settings' (Navi Key):data.victoriamobile.cz
• Select 'Proxy' and then highlight and select 'disabled' (Navi Key)
• Ignore 'Data bearer' this should be set to 'Packet Data'
• Highlight and select 'Bearer settings' (Navi Key)
• Select 'Packet data access point' and enter data.victoriamobile.cz and select 'OK' (Navi Key)
• Ignore 'Authentication type', this should be set as 'Normal'
• Highlight 'Username' and select, enter lmde and select 'OK' (Navi Key)
• Highlight 'Password' and select, enter plus and select 'OK'. Verify password and again 'OK' (Navi Key)
• Press 'Back' three times (Right Soft Key).
• Highlight victoria mobile and select 'Options' (Left Soft Key).
• Select 'Activate' (Navi Key)
• Press back 4 times (Right Soft Key)

• Press the menu button (button on the left hand side of the phone next to the Navi key).
• Highlight 'Tools' and select (press Navi key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Connection' and select (press Navi key).
• Highlight 'Access points' and select (press Navi key).
• Select 'Options' (left soft key)
• Highlight 'New access point' and select (press Navi key).
• Select 'Connection name' (press Navi key) and change to victoria mobile and 'OK' (left soft key).
• Highlight 'Data bearer' and select (press Navi key) select 'Packet data' and 'OK' (left soft key).
• Highlight 'Access point name' and select (press Navi key): data.victoriamobile.cz and 'OK' (left soft key).
• Highlight 'User name' and select (press Navi key), enter lmde and 'OK' (left soft key).
• Highlight 'Prompt password' and press Navi key password: plus and 'OK' (left soft key).
• Highlight 'Authentication' and press Navi key to change to 'Normal'.
• Highlight 'Homepage' and select (press Navi key), enter www.victoriamobile.cz and 'OK' (left soft key).
• Press 'Options' (left soft key), highlight 'Advanced settings' and select (press Navi key).
• Highlight 'Network type' and press Navi key to change to 'IPv4'.
• Highlight 'Phone IP address' and press Navi key to change to 'Automatic'.
• Press the right soft key 6 times to get you back to the main menu.
• Select 'Web' (press Navi key, if handset trys to connect to WAP at this stage press the right soft key to 'Cancel')
• Select 'Options' (left soft key)
• Scroll to 'Settings' and 'Select' (left soft key).
• Highlight 'General' and select (press Navi key).
• Highlight 'Access point' and select (press Navi key)
• Highlight 'User defined' and select (press Navi key)
• Highlight victoria mobile and select (press Navi key).
• Press right soft key 3 times to get back to the standby screen.

• The phone has a four-way directional Navi key and two soft keys on either side of this. The Navi key can also be pressed in to select options.
• Select the Menu (press Navi key)
• Highlight Settings and Select (press Navi key)
• Highlight Configuration and Select (press Navi key)
• Highlight Personal config. sett. and Select (press Navi key)
• Select Add (press Navi key)
• Highlight Web and Select (press Navi key)
• Highlight Account Name and Select (press Navi key), enter victoria mobile then OK (press Navi key)
• Highlight Homepage and Select (press Navi key), enter www.victoriamobile.cz then OK (press Navi key)
• Highlight User name and select (press Navi key), enter lmde then OK (press Navi key)
• Highlight Password and select (press Navi key), enter plus then OK (press Navi key), verify new password and again select OK (press Navi key)
• Highlight Use pref. access pt. and Select (press Navi key), highlight No and Select (press Navi key)
• Highlight Access point settings: data.victoriamobile.cz and Select (press Navi key)
• proxy: disabled
• Highlight Bearer settings and Select (press Navi key)
• Ignore Network type this should be set to IPv4
• Ignore Authentication type, this should be set as Normal
• Highlight User name and Select (press Navi key), enter lmde and OK (press Navi key)
• Highlight Password and Select (press Navi key), enter plus and select OK (press Navi key), verify password and again OK (press Navi key)
• Press Back three times (right soft key)
• Highlight victoria mobile and press Options (left soft key)
• Highlight Activate and Select (press Navi key)
• Press Back (right soft key) four times.

• Press the Menu key (white key)
• Tap Settings
• Tap Connectivity
• Tap Destinations
• Tap Access point
• Tap No to the question, Automatically check for available access points?
• Tap Packet data
• Tap the text box to enter victoria mobile when entered tap the green tick, then tap OK
• Tap WAP services
• On the Network destinations screen, tap WAP services
• Skip past Connection name and Data bearer as you've already filled these in
• Tap Access point name and tap the text box to enter: data.victoriamobile.cz when entered tap the green tick, then tap OK
• Tap Username and tap the text box to enter lmde when entered tap the green tick, then tap OK
• Skip past Prompt password as this is preset at No
• Tap Password and tap the text box to enter password: plus when entered tap the green tick, then tap OK
• Tap Authentication until it shows Normal
• Tap Homepage and tap the text box to enter www.victoriamobile.cz when entered tap the green tick, then tap OK
• Tap Use access point until it shows After confirmation
• Tap Options and then tap Advanced settings
• Skip past Network type as this is preset to IPv4
• Tap Back twice
• Tap Options
• Tap Organise and then tap Change priority
• Tap the position you require (this would usally be number 1) and then tap OK
• Tap Back five times, to return to the standby screen.

• With phone open using desk menu scroll to 'Tools' and press 'Open'.
• Highlight 'Control Panel' and press 'Open'.
• Highlight 'Connections' and press 'Open'.
• Highlight 'Internet Setup' and press 'New'
• When asked the question 'Do you want to create a copy of existing Internet access point?' Press 'NO'.
• When the 'Welcome message appears press 'Next'.
• With 'Internet Settings Name highlighted' enter victoria mobile
• Highlight 'Network ID' and Press 'Change'.
• Highlight 'Default GPRS Network' and press 'Select
• Highlight 'Internet Settings Type' and highlight GPRS and press 'Select'.
• Now Press 'Next'.
• Highlight 'GPRS access point name' and enter: data.victoriamobile.cz Highlight 'Password Prompt' and Select 'No'
• Highlight 'User name' and enter lmde
• Highlight 'Password' and enter plus and press 'Next'
• When message 'Internet setup has finished. Press Finish to store the settings, cancel to discard them, or advanced to edit.' Press 'Advanced'.
• Under 'IP configuration' highlight Network type and select 'IPv4'
• Highlight 'IPv6 DNS mode' and select 'Well Known'.
• Under 'Other' Highlight 'Allow Plain text login' and select 'Yes'
• Press 'Done'
• Press 'Finish'

GPRS settings for Nokia, 3110 classic

• Open Menu->Services -> Settings -> Connection settings -> Active service settings.
• Scroll to the desired profile and press Activate.
• Open Edit active service settings.
• Fill your parameters as shown below:
  • Settings' name: victoria mobile
  • Homepage: http://www.victoriamobile.cz
  • Session mode: Permanent
  • Connection security: Off
  • Data bearer: GPRS
• Open Bearer settings.
• Fill your parameters as shown below:
  • GPRS access point: data.victoriamobile.cz
  • IP address: None
  • Authentication type: Normal
  • Login type: Automatic
  • User name: lmde
  • Password: plus
• To start WAP session return to Services and select Home.
• To finish WAP session press NO.

• Press Menu button (Navi key).
• Scroll to 'Settings' and press 'Select' (Navi key).
• Highlight 'Configuration' and press 'Select' (Navi key).
• Highlight 'Personal Configuration Settings' and press 'Select' (Navi key).
• Press 'Add' [If there are profiles in the hand set already Press 'Options' then select 'Add new']
• Highlight 'Web' and press 'Select' (Navi key).
• Highlight 'Account name' and press 'Select' (Navi key).
• Enter victoria mobile and then press 'OK' (Navi key).
• Highlight 'Homepage' and press 'Select' (Navi key).
• Enter www.victoriamobile.cz then press 'OK' (Navi key).
• Ignore 'User name': lmde
• Ignore 'Password': plus
• Highlight 'Use preferred access point' press 'Select' (Navi key): data.victoriamobile.cz
• Highlight 'No' and press 'Select' (Navi key).
• If asked to 'Define access point settings' then press 'OK' (Navi key)..
• Highlight 'Proxy' and press 'Select' (Navi key).
• Highlight 'disable' and press 'Select' (Navi key).
• Highlight 'Data bearer' and press 'Select' (Navi key).
• Highlight 'Packet data' and press 'Select' (Navi key).
• Highlight 'Bearer settings' and press 'Select' (Navi key).

• Select 'Menu' (press Navi Key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Configuration' and select (press Navi key).
• Highlight 'Personal configuration settings' and select (press Navi key).
• Press 'Add new' (If there are profiles in the hand set already Press 'Options' then select 'Add new').
• Highlight 'Web' and select (press Navi key).
• Highlight 'Account Name' and select (press Navi key), enter victoria mobile then 'OK' (press Navi Key).
• Highlight 'Homepage' and select (press Navi key), enter www.victoriamobile.cz then 'OK' (press Navi Key).
• Highlight 'User name' and select (press Navi key), enter lmde then 'OK' (press Navi Key).
• Highlight 'Password' and select (press Navi key), enter plus then 'OK', verify password and again select 'OK' (press Navi Key).
• Highlight 'Use preferred access point' and select (press Navi key), highlight 'No' and select (press Navi key).
• Highlight 'Access point settings' and select (press Navi key): data.victoriamobile.cz
• Ignore 'Data bearer' this should be set to 'Packet Data'.
• Highlight 'Bearer settings' and select (press Navi key).
• Ignore 'Network type' this should be set to 'IPv4'.
• Highlight 'Activate' and select (press Navi Key).
• Press 'Back' (right soft key) 4 times to return to the sandby screen.

• Select 'Menu' (press Navi Key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Configuration' and select (press Navi key).
• Highlight 'Personal config. sett.' and select (press Navi key).
• Select 'Add' (press Navi key).
• Highlight 'Web' and select (press Navi key).
• Highlight 'Account Name' and select (press Navi key), enter victoria mobile then 'OK' (press Navi Key).
• Highlight 'Homepage' and select (press Navi key), enter www.victoriamobile.cz then 'OK' (press Navi Key).
• Highlight 'User name' and select (press Navi key), enter lmde then 'OK' (press Navi Key).
• Highlight 'Password' and select (press Navi key), enter plus then 'OK', verify password and again select 'OK' (press Navi Key).
• Highlight 'Use pref. access pt.' and select (press Navi key), highlight 'No' and select (press Navi key).
• Press 'OK' (press Navi key) to the question 'Define access point settings'.
• Highlight 'Access point settings' and select (press Navi key): data.victoriamobile.cz
• Ignore 'Data bearer' this should be set to 'Packet Data'.
• Highlight 'Bearer settings' and select (press Navi key).
• Highlight 'Packet data acc pt' and select (press Navi key), enter 'data.victoriamobile.cz and 'OK' (press Navi Key).
• Ignore 'Network type' this should be set to 'IPv4'.
• Highlight 'Activate' and select (press Navi Key).
• Press 'Back' (right soft key) 4 times.

• Press the Menu button (button to the left of the Navi button).
• Scroll to 'Tools' and press the Navi key to select.
• Highlight 'Settings, and then press the Navi key to select.
• Highlight 'Connection', and then press the Navi key to select.
• Highlight 'Access points', then press the Navi key to select.

If no access points defined, you will be asked to 'Define now?' press 'Yes' (left soft key).

• If you are not asked to 'Define access points?' then press Options (left soft key), highlight 'New access point' and then press Select (left soft key).
• Highlight 'Use Default Settings', then press Select (left soft key).
• Highlight 'Connection name', press the Navi key to select then enter victoria mobile and press OK (left soft key).
• Highlight 'Data bearer', then press the Navi key to select. Then highlight 'GPRS', and press OK (left soft key).
• Highlight 'Access point name', then press the Navi key to select. Enter data.victoriamobile.cz and then press OK (left soft key).
• Highlight 'Username', and then press the Navi key to select. Enter lmde then press OK (left soft key).
• Highlight 'Prompt password', then press the Navi key to select 'No'.
• Highlight password: plus then press the Navi key to select. Enter plus then press OK (left soft key).
• Highlight 'Authentication' , use the Navi key to select 'Normal'.
• Highlight 'Homepage' then press the Navi key to select. Enter: Nokia 7650 then press OK (left soft key).
• Highlight 'Connection Security', press the Navi key and select 'off'.
• High 'Session Mode' press the Navi key to select 'permanent'.
• Press Options (left soft key), highlight 'Advanced Settings' and press Select (left soft key).
• Ignore 'Server address': this should be blank or showing 'none'.
• Press Back (right soft key) 6 times to return to the Main Menu.
• Press Back (right soft key) 6 times to return to the Main Menu.
• Scroll to 'Services', and then press the Navi key to select.
• Press Options (left soft key), then highlight 'Settings' and press the Navi key to select.
• Highlight 'Default access point', and then press the Navi key to select.
• Press Back (right soft key) 3 times to return to the standby screen.

• Press the Menu button (large button to the left of call key & left soft key).
• Scroll to Settings, and then press the Navi key to select.
• Highlight 'Connection', and then press the Navi key to select.
• Highlight 'Access points', then press the Navi key to select.

If no access points defined, you will be asked to 'Define now?' press 'Yes' (left soft key).

• If you are not asked to 'Define access points?' then press Options (left soft key), highlight 'New access point' and then press Select (left soft key).
• Highlight 'Use Default Settings', then press Select (left soft key).
• Highlight 'Connection name', press the Navi key to select then enter victoria mobile and press OK (left soft key).
• Highlight 'Data bearer', then press the Navi key to select. Then highlight 'GPRS', and press OK (left soft key).
• Highlight 'Access point name', then press the Navi key to select. Enter data.victoriamobile.czand then press OK (left soft key).
• Highlight 'Username', and then press the Navi key to select. Enter lmde and then press OK (left soft key).
• Highlight 'Prompt password', then press the Navi key to select 'No'.
• Highlight plus and then press the Navi key to select. Enter plus then press OK (left soft key).
• Highlight 'Authentication', and then press the Navi key to select 'Normal'.
• Highlight 'Homepage' then press the Navi key to select. Enter: www.victoriamobile.cz then press OK (left soft key).
• Press Back (right soft key) 5 times to return to the Main Menu.
• Scroll to 'Web', and then press the Navi key to select.
• Press Options (left soft key), then highlight 'Settings' and press the Navi key to select.
• Press Back (right soft key) 3 times to return to the standby screen.

• Press the Menu button (button directly below the Navi button).
• Scroll to 'Tools' and press the Navi key to select.
• Highlight 'Settings, and then press the Navi key to select.
• Highlight 'Connection', and then press the Navi key to select.
• Highlight 'Access points', then press the Navi key to select.

If no access points defined, you will be asked to 'Define now?' press 'Yes' (left soft key).

• • If you are not asked to 'Define access points?' then press Options (left soft key), highlight 'New access point' and then press Select (left soft key).
  • Highlight 'Use Default Settings', then press Select (left soft key).
  • Highlight 'Connection name', press the Navi key to select then enter victoria mobile and press OK (left soft key).
  • Highlight 'Data bearer', then press the Navi key to select. Then highlight victoria mobile and press OK (left soft key).
  • Highlight 'Access point name', then press the Navi key to select. Enter data.victoriamobile.cz and then press OK (left soft key).
  • Highlight 'Username', and then press the Navi key to select. Enter lmde then press OK (left soft key).
  • Highlight 'Prompt password', then press the Navi key to type: plus
  • Highlight plus then press the Navi key to select. Enter plus then press OK (left soft key).
  • Highlight 'Authentication' , use the Navi key to select 'Normal'.
  • Highlight 'Homepage' then press the Navi key to select. Enter: www.victoriamobile.cz then press OK (left soft key).
  • Highlight 'Connection Security', press the Navi key and select 'off'.
  • High 'Session Mode' press the Navi key to select 'permanent'.
  • Press Options (left soft key), highlight 'Advanced Settings' and press Select (left soft key).
  • Press Back (right soft key) 6 times to return to the Main Menu.
  • Scroll to 'Services', and then press the Navi key to select.
  • Press Options (left soft key), then highlight 'Settings' and press the Navi key to select.
  • Highlight 'Default access point', and then press the Navi key to select.
  • Highlight victoria mobile, then press Navi key to select.
  • Press Back (right soft key) 3 times to return to the standby screen.

• Press the Menu button (button directly below the Navi button).
• Highlight Tools and then press the Navi Key to select.
• Highlight Settings, and then press the Navi key to select.
• Select 'Options'
• Highlight 'Connection', and then press the Navi key to select.
• Highlight 'Access points', then press the Navi key to select.

If no access points defined, you will be asked to 'Define now?' press 'Yes' (left soft key).

• If you are not asked to 'Define access points?' then press Options (left soft key), highlight 'New access point' and then press Select (left soft key). data.victoriamobile.cz
• Highlight 'Connection name', press the Navi key to select then enter victoria mobile and press OK (left soft key).
• Highlight 'Data bearer', then press the Navi key to select. Then highlight 'GPRS', and press OK (left soft key).
• Highlight 'Access point name', then press the Navi key to select. Enter data.victoriamobile.cz and then press OK (left soft key).
• Highlight 'Username', and then press the Navi key to select. Enter lmde and then press OK (left soft key).
• Highlight 'Prompt password', then press the Navi key to select 'No'.
• Highlight password: plus then press the Navi key to select. Enter plus then press OK (left soft key).
• Highlight 'Authentication' , use the Navi key to select 'Normal'.
• Highlight 'Homepage' then press the Navi key to select. Enter: www.victoriamobile.cz then press OK (left soft key).
• Highlight 'Connection Security', press the Navi key and select 'off'.
• High 'Session Mode' press the Navi key to select 'permanent'.
• Select the 'Back' button
• Select 'Default access points.

• Select 'Menu' (press Navi Key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Configuration' and select (press Navi key).
• Highlight 'Personal config. sett.' and select (press Navi key).
• Select 'Add' (press Navi key).
• Highlight 'Web' and select (press Navi key).
• Highlight 'Account Name' and select (press Navi key), enter victoria mobile then 'OK' (press Navi Key).
• Highlight 'Homepage' and select (press Navi key), enter www.victoriamobile.cz then 'OK' (press Navi Key).
• Highlight 'User name' and select (press Navi key), enter 'lmde then 'OK' (press Navi Key).
• Highlight 'Password' and select (press Navi key), enter 'password': plus then 'OK', verify password and again select 'OK' (press Navi Key).
• Highlight 'Use pref. access pt.' and select (press Navi key), highlight 'No' and select (press Navi key).
• Highlight 'Access point settings' and select (press Navi key).
• Ignore 'Data bearer' this should be set to 'Packet Data'.
• Highlight 'Bearer settings' and select (press Navi key).
• Highlight 'Packet data acc pt' and select (press Navi key), enter data.victoriamobile.cz and 'OK' (press Navi Key).
• Ignore 'Network type' this should be set to 'IPv4'.
• Ignore 'Authentication type', this should be set as 'Normal'
• Highlight 'Username' and select (press Navi key), enter lmde and 'OK' (press Navi Key).
• Highlight 'Password' and select (press Navi key), enter 'password: plus and select 'OK' (press Navi key). Verify password and again 'OK' (press Navi Key).
• Press 'Back' three times (right soft key).
• Highlight victoria mobile and select 'Options' (left soft key).
• Highlight 'Activate' and select (press Navi Key).
• Press 'Back' (right soft key) 4 times.

• Select 'Menu' (press Navi Key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Configuration' and select (press Navi key).
• Highlight 'Personal configuration settings' and select (press Navi key).
• Select 'Add new' (press Navi key).
• Highlight 'Web' and 'Select' (press Navi key).
• Highlight 'Account Name' and 'Select' (press Navi key), enter victoria mobile then 'OK' (press Navi Key).
• Highlight 'Homepage' and 'Select' (press Navi key), enter www.victoriamobile.cz then 'OK' (press Navi Key).
• Highlight 'User name' and 'Select' (press Navi key), enter 'lmde then 'OK' (press Navi Key).
• Highlight 'Password' and 'Select' (press Navi key), enter 'password: plus then 'OK', verify password and again select 'OK' (press Navi Key).
• Highlight 'Use preferred access point' and 'Select' (press Navi key), highlight 'No' and 'Select' (press Navi key).
• Highlight 'Access point settings' and 'Select' (press Navi key).
• proxy highlight disabled' and 'Select' (press Navi key).
• Ignore 'Data bearer' this should be set to 'Packet Data'.
• Highlight 'Bearer settings' and 'Select' (press Navi key).
• Highlight 'Packet data access point' and select (press Navi key), enter data.victoriamobile.cz and 'OK' (press Navi Key).
• Ignore 'Authentication type', this should be set as 'Normal'
• Highlight 'Username' and 'Select' (press Navi key), enter lmde and 'OK' (press Navi Key).
• Highlight 'Password' and 'Select' (press Navi key), enter 'password: plus and 'OK' (press Navi key). Verify password and again 'OK' (press Navi Key).
• Press 'Back' three times (right soft key).
• Highlight victoria mobile and select 'Options' (left soft key).
• Highlight 'Activate' and 'Select' (press Navi Key).
• Press 'Back' (right soft key) 4 times.

• Press Menu (Navi key)
• Highlight Settings and Select (press Navi key)
• Highlight Configuration and Select (press Navi key)
• Highlight Personal settings and Select (press Navi key)
• Press Add (Navi key)
• Highlight Web and then Select (press Navi key)
• Highlight Account Name and then Select (press Navi key), enter victoria mobile then press OK (Navi key)
• Highlight Homepage and then Select (press Navi key), enter www.victoriamobile.cz then press OK (Navi key)
• Highlight User name and then Select (press Navi key), enter lmde then press OK(Navi key)
• Highlight Password and then Select (press Navi key), enter password: plus then pressOK (press Navi key), verify password and again select OK (press Navi key)
• Highlight Use pref. access pt. and then Select (press Navi key), highlight No and then Select (press Navi key)
• Highlight Access point sett. and Select (press Navi key)
• Highlight Bearer settings and then Select (press Navi key)
• Highlight Packet data acc. pt. and then Select (press Navi key),data.victoriamobile.cz and then press OK (Navi key)
• Skip past Network type this should be set to IPv4
• Skip past Authentication type this should be set as Normal
• Highlight User name and then Select (press Navi key), enter : lmde then press OK(Navi key)
• Highlight Password and then Select (press Navi key), enter password: plus then press OK (press Navi key), verify password and again select OK (press Navi key)
• Press Back (right soft key) three times
• Highlight victoria mobile and press Options (left soft key)

• Press the Menu button (left soft key).
• Scroll to Services, then press Select (left soft key).
• Highlight 'Settings', then press Select (left soft key).
• Highlight 'Active service settings', then press Select (left soft key).
• Highlight the next available set (e.g. Set 1), then press Activate (left soft key).
• Highlight 'Edit active service settings', then press Select (left soft key).
• Highlight 'Settings' name' and press Select (left soft key). Enter victoria mobile and press OK (left soft key).
• Highlight 'Homepage', then press Select (left soft key). Enter www.victoriamobile.cz and press OK (left soft key).
• Highlight 'Session mode', then press Select (left soft key). Highlight 'Permanent' and press Select (left soft key).
• Highlight 'Connection security', then press Select (left soft key). Highlight 'Off', then press Select (left soft key).
• Highlight 'Data bearer', then press Select (left soft key). Highlight 'GPRS', then press Select (left soft key)
• Highlight 'GPRS access point', then press Select (left soft key). Enter data.victoriamobile.cz and press OK (left soft key).
• Highlight 'Authentication type', then press Select (left soft key). Highlight 'Normal' and press Select (left soft key).
• Highlight 'Login type', then press Select (left soft key). Highlight 'Automatic', and press Select (left soft key).
• Highlight 'User name', then press Select (left soft key). Enter 'lmde and press OK (left soft key)
• Highlight plus then press Select (left soft key). Enter 'password: plus and press OK (left soft key).
• When asked to 'Verify new password' enter 'password' and press OK (left soft key).
• Press Back (right soft key) 4 times to return to the standby screen.

• Select 'Menu' (press Navi Key).
• Highlight 'Settings' and select (press Navi key).
• Highlight 'Configuration' and select (press Navi key).
• Highlight 'Personal config. sett.' and select (press Navi key).
• Select 'Add' (press Navi key).
• Highlight 'Web' and select (press Navi key).
• Highlight 'Account Name' and select (press Navi key), enter victoria mobile then 'OK' (press Navi Key).
• Highlight 'Homepage' and select (press Navi key), enter www.victoriamobile.cz then 'OK' (press Navi Key).
• Highlight 'User name' and select (press Navi key), enter 'lmde then 'OK' (press Navi Key).
• Highlight 'Password' and select (press Navi key), enter 'password: plus then 'OK', verify password and again select 'OK' (press Navi Key).
• Highlight 'Use pref. access pt.' and select (press Navi key), highlight 'No' and select (press Navi key).
• Press 'OK' (press Navi key) to the question 'Define access point settings'.
• Highlight 'Access point settings' and select (press Navi key): data.victoriamobile.cz
• highlight disabled' and select (press Navi key).
• Ignore 'Data bearer' this should be set to 'Packet Data'.
• Highlight 'Bearer settings' and select (press Navi key).
• Highlight 'Packet data acc pt' and select (press Navi key), data.victoriamobile.cz and 'OK' (press Navi Key).
• Ignore 'Network type' this should be set to 'IPv4'.
• Ignore 'Authentication type', this should be set as 'Normal'
• Highlight 'Username' and select (press Navi key), enter 'lmde and 'OK' (press Navi Key).
• Highlight 'Password' and select (press Navi key), enter 'password: plus and select 'OK' (press Navi key). Verify password and again 'OK' (press Navi Key).
• Press 'Back' three times (right soft key).
• Highlight victoria mobile and select 'Options' (left soft key).
• Highlight 'Activate' and select (press Navi Key).
• Press 'Back' (right soft key) 4 times.

• Press the menu key.
• Highlight 'Settings' and then 'Open' (press Navi key).
• Highlight 'Phone sett.' and then 'Open' (press Navi key).
• Highlight 'Connection' and then 'Open' (press Navi key).
• Highlight 'Destinations' and then 'Open' (press Navi key).
• Highlight 'Access point' and then 'Select' (press Navi key).
• Answer 'No' (right soft key) to the question, "Automatically check for available access points?".
• Highlight 'Packet data' and then 'Select' (left soft key).
• Enter 'victoria mobile active' as the access point name and then press 'OK' (left soft key).
• Highlight 'WAP services' and then 'Select' (left soft key).
• Highlight 'WAP services' and then 'Open' (press Navi key).
• Highlight victoria mobile and then 'Edit' (press Navi key).
• Ignore 'Connection name' and 'Data bearer' as these have already been filled in.
• Highlight 'Access point name' and then 'Change' (press Navi key), enter data.victoriamobile.cz and 'OK' (left soft key).
• Highlight 'User name' and then 'Change' (press Navi key), enter :lmde and 'OK' (left soft key).
• Highlight 'Prompt password' and press Navi key to change to : no
• Highlight 'Password' and then 'Change' (press Navi key), enter 'password: plus and 'OK' (left soft key).
• Highlight 'Authentication' and press Navi key to change to 'Normal'.
• Highlight 'Homepage' and then 'Change' (press Navi key), enter www.victoriamobile.cz and 'OK' (left soft key).
• Highlight 'Use access point' and press Navi key to change to 'Automatically'.
• Press 'Options' (left soft key), highlight 'Advanced settings' and the 'Select' (left soft key).
• Highlight 'Network type' and press Navi key to change to 'IPv4'.
• Press 'Back' (right soft key) twice.
• Highlight victoria mobile and press 'Options' (left soft key).
• Highlight Organise and then 'Select' (left soft key), highlight 'Change priority' and then 'Select' (left soft key).
• Highlight the position you require (this would usally be number 1) and then press 'OK'.
• Press the right soft key six times, to return to the standby screen.

• Select the Menu (press Navi key)
• Highlight Settings and Select (press Navi key)
• Highlight Configuration and Select (press Navi key)
• Highlight Personal config. sett. and Select (press Navi key)
• Select Add (press Navi key)
• Highlight Web and Select (press Navi key)
• Highlight Account Name and Select (press Navi key), enter victoria mobile then OK (press Navi key)
• Highlight Homepage and Select (press Navi key), enter www.victoriamobile.cz then OK (press Navi key)
• Highlight User name and select (press Navi key), enter lmde then OK (press Navi key)
• Highlight Password and select (press Navi key), enter password: plus then OK (press Navi key), verify new password and again select OK (press Navi key)
• Highlight Use pref. access pt. and Select (press Navi key), highlight No and Select (press Navi key)
• Highlight Access point settings and Select (press Navi key)
• Highlight disable and Select (press Navi key)
• Skip past Data bearer as this should be preset as Packet Data
• Highlight Bearer settings and Select (press Navi key)
• Highlight Packet data acc. pt. and Select (press Navi key), enter data.victoriamobile.cz and OK (press Navi key)
• Ignore Network type this should be set to IPv4
• Ignore Authentication type, this should be set as Normal
• Press Back three times (right soft key)
• Highlight Activate and Select (press Navi key)
• Press Back (right soft key) four times.

• Please follow the below steps for victoria mobile GPRS Settings:
• Select Start Settings connections - Again Connections on the Top
• Tap icon connections, select Advanced:
• Select Select Networks
• In the text of Programs that automatically connect to the Internet should connect using select new
• In the box of Enter a name for these settings: victoria mobile
• Select Modem, and then new
• In the box of Enter a name for the connection: victoria mobile
• In the box of Select a modem: victoria mobile
• Tap next
• in the box of access point name: data.victoriamobile.cz
• homepage: www.victoriamobile.cz
• Tap next
• User name: lmde
• Password: plus
• Domain:-
• Tap Advance
• Tap OK, and then tap Finish
• Tap Proxy Settings: disable
• Select This network connection to the internet
• Tap OK, and then Tap OK.

• With phone open using desk menu scroll to 'Tools' and press 'Open'.
• Highlight 'Control Panel' and press 'Open'.
• Highlight 'Connections' and press 'Open'.
• Highlight 'Internet Setup' and press 'New'
• When asked the question 'Do you want to create a copy of existing Internet access point?' Press 'NO'.
• When the 'Welcome message appears press 'Next'.
• With 'Internet Settings Name highlighted' enter victoria mobile
• Highlight 'Network ID' and Press 'Change'.
• Highlight 'Default GPRS Network' and press 'Select
• Highlight 'Internet Settings Type' and highlight GPRS and press 'Select'.
• Now Press 'Next'.
• Highlight 'GPRS access point name' and enter: data.victoriamobile.cz
• Highlight 'Password Prompt' and Select 'No'
• Highlight 'User name: lmde
• Highlight 'Password: plus
• When message 'Internet setup has finished. Press Finish to store the settings, cancel to discard them, or advanced to edit.' Press 'Advanced'.
• Highlight 'IPv6 DNS mode' and select 'Well Known'.
• Under 'Proxies: disable
• Under 'Other' Highlight 'Allow Plain text login' and select 'Yes'
• Press 'Done'
• Press 'Finish'